ISO/FDIS 4172

Technical product documentation (TPD) — Construction documentation — Drawings for the assembly of prefabricated structures

This second edition cancels and replaces the first edition (ISO 4172 :1981), clause 2 and subclause 4.3 of which have been technically revised. Specifies general rules for the preparation of working drawings intended for the field assembly of prefabricated structures for building and civil engineering works. Gives normative references, definitions, documentation, designation of prefabricated structural components.

Documentation technique de produits (DTP) — Documentation de construction — Dessins d'assemblage des structures préfabriquées

General Information

• Status: Not Published
• ICS: 01.100.30 - Construction drawings
• Technical Committee: ISO/TC 10/SC 8 - Construction documentation
• Drafting Committee: ISO/TC 10/SC 8 - Construction documentation
• Current Stage: 5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
• Start Date: 18-Dec-2023
• Completion Date: 18-Dec-2023

Relations

• Revises: ISO 4172:1991 - Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures
• Effective Date: 06-Jun-2022

Standards Content (Sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 4172
ISO/TC 10/SC 8
Technical product documentation
Secretariat: SIS
(TPD) — Construction documentation
Voting begins on:
2023-12-18 — Drawings for the assembly of
prefabricated structures
Voting terminates on:
2024-02-12
Documentation technique de produits (DTP) — Documentation de
construction — Dessins d'assemblage des structures préfabriquées
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 4172:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 4172:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 4172
ISO/TC 10/SC 8
Technical product documentation
Secretariat: SIS
(TPD) — Construction documentation
Voting begins on:
— Drawings for the assembly of
prefabricated structures
Voting terminates on:
Documentation technique de produits (DTP) — Documentation de
construction — Dessins d'assemblage des structures préfabriquées
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO­
ISO/FDIS 4172:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN­
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 4172:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Documentation . 2
4.1 General . 2
4.1.1 Types of drawings and documents . 2
4.1.2 Application of lines . 2
4.1.3 Presentation of dimensions . 3
4.1.4 Indications of tolerances and limit deviations . 3
4.
...

ISO/DISFDIS 4172:2023(E)
Date: 2023-04-11
ISO/TC 10/SC 8
Secretariat: SIS
Date: 2023-12-01
Technical product documentation (TPD) — Construction
documentation — Drawings for the assembly of prefabricated
structures
Documentation technique de produits (DTP) — Documentation de construction — Dessins d'assemblage
des structures préfabriquées
FDIS stage

---------------------- Page: 1 ----------------------
ISO/DISFDIS 4172:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this
publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical,
including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can
be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: + 41 22 749 01 11
EmailE-mail: [e-mail]
Website: www.iso.orgwww.iso.org
Published in Switzerland
ii © ISO 2023 – All rights reserved
ii © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/DISFDIS 4172:2023(E)
Contents
Foreword . vi
Introduction .vi i
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Documentation . 2
4.1 General . 2
4.1.1 Types of drawings and documents . 2
4.1.2 Application of lines . 2
4.1.3 Presentation of dimensions . 3
4.1.4 Indications of tolerances and limit deviations . 3
4.1.5 Instructional information . 3
4.2 General arrangement drawings . 3
4.2.1 General . 3
4.2.2 Presentation . 4
4.2.3 Views and scales . 4
4.2.4 Indication of designations . 4
4.2.5 Presentation of underground structures . 4
4.3 Assembly drawings . 15
4.3.1 General . 15
4.3.2 Presentation .
...