ISO/IEC TR 23272:2006
(Main)Information technology — Common Language Infrastructure (CLI) — Technical Report on Information Derived from Partition IV XML File
Information technology — Common Language Infrastructure (CLI) — Technical Report on Information Derived from Partition IV XML File
This Technical Report is intended as an aid for understanding the libraries specified in Standard ECMA-335, Partition IV: Profiles and Libraries. That Partition includes a machine-readable specification, in XML, of the types that comprise the standard libraries. This Technical Report, in companion files, provides the following items which help to form a traceable chain from the normative XML specification to a portable, printable representation of its contents: Tool Source Code: A program written in the C# programming language, XML Style-sheet Language (XSL), and using the facilities of the Microsoft .NET Framework(TM) and Microsoft Office(TM) to convert the XML into files viewable using Microsoft Word(TM). This program, provided by Intel Corporation, can be modified to produce other views of the XML. Microsoft Word(TM) Files: These are the files produced by running the tool mentioned above on the XML from Partition IV. The Ecma task group TC39/TG3 used similar files (produced using earlier versions of this tool run against earlier versions of the XML) as the primary means of reviewing the XML. PDF(TM) Files: These files are produced from the Microsoft Word(TM) files using the Adobe Acrobat(TM) program. They are viewable on a wide range of computer systems and printable on a range of computer output devices. In most cases, they will appear visually identical regardless of the means used to render them.
Technologies de l'information — Infrastructure commune de langage — Rapport technique sur l'information dérivée du fichier partition IV XML
General Information
Relations
Standards Content (Sample)
TECHNICAL ISO/IEC
REPORT TR
23272
Second edition
2006-08-01
Information technology — Common
Language Infrastructure (CLI) —
Technical Report on Information Derived
from Partition IV XML File
Technologies de l'information — Infrastructure commune de langage —
Rapport technique sur l'information dérivée du fichier partition IV XML
Reference number
ISO/IEC TR 23272:2006(E)
©
ISO/IEC 2006
---------------------- Page: 1 ----------------------
ISO/IEC TR 23272:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2006 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC TR 23272:2006(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
In exceptional circumstances, the joint technical committee may propose the publication of a Technical Report
of one of the following types:
⎯ type 1, when the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts;
⎯ type 2, when the subject is still under technical development or where for any other reason there is the
future but not immediate possibility of an agreement on an International Standard;
⎯ type 3, when the joint technical committee has collected data of a different kind from that which is
normally published as an International Standard (“state of the art”, for example).
Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether
they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to
be reviewed until the data they provide are considered to be no longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.