ISO/IEC 15444-12:2005/Amd 2:2008
(Amendment)Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 2: Hint track format for ALC/LCT and FLUTE transmission and multiple meta box support
Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 2: Hint track format for ALC/LCT and FLUTE transmission and multiple meta box support
Technologies de l'information — Système de codage d'images JPEG 2000 — Partie 12: Format ISO de base pour les fichiers médias — Amendement 2: Format de piste optimisé pour transmission ALC/LCT et FLUTE et support de boîte "meta" multiple
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 15444-12
Second edition
2005-04-01
Corrected version
2005-10-01
AMENDMENT 2
2008-02-01
Information technology — JPEG 2000
image coding system —
Part 12:
ISO base media file format
AMENDMENT 2: Hint track format for
ALC/LCT and FLUTE transmission and
multiple meta box support
Technologies de l'information — Système de codage d'images
JPEG 2000 —
Partie 12: Format ISO de base pour les fichiers médias
AMENDEMENT 2: Format de piste optimisé pour transmission
ALC/LCT et FLUTE et support de boîte "meta" multiple
Reference number
ISO/IEC 15444-12:2005/Amd.2:2008(E)
©
ISO/IEC 2008
---------------------- Page: 1 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to ISO/IEC 15444-12:2005 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 29, Coding of audio, picture, multimedia and hypermedia
information.
© ISO/IEC 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
Information technology — JPEG 2000 image coding system —
Part 12:
ISO base media file format
AMENDMENT 2: Hint track format for ALC/LCT and FLUTE
transmission and multiple meta box support
Replace Clause 3 with the following:
3 Terms, definitions and abbreviated terms
For the purposes of this document, the following terms and definitions and abbreviated terms apply.
3.1 Terms and definitions
3.1.1
Box
object-oriented building block defined by a unique type identifier and length (called ‘atom’ in some
specifications, including the first definition of MP4)
3.1.2
Chunk
contiguous set of samples for one track
3.1.3
Container Box
box whose sole purpose is to contain and group a set of related boxes
3.1.4
Hint Track
special track which does not contain media data. Instead it contains instructions for packaging one or more
tracks into a streaming channel
3.1.5
Hinter
tool that is run on a file containing only media, to add one or more hint tracks to the file and so facilitate
streaming
3.1.6
Movie Box
container box whose sub-boxes define the metadata for a presentation (‘moov’)
3.1.7
Media Data Box
container box which can hold the actual media data for a presentation (‘mdat’)
© ISO/IEC 2008 – All rights reserved 1
---------------------- Page: 4 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
3.1.8
ISO Base Media File
name of the file format described in this specification
3.1.9
Presentation
one or more motion sequences (q.v.), possibly combined with audio
3.1.10
Sample
In non-hint tracks, a sample is an individual frame of video, a series of video frames in decoding order, or a
compressed section of audio in decoding order. In hint tracks, a sample defines the formation of one or more
streaming packets. No two samples within a track may share the same time-stamp.
3.1.11
Sample Description
structure which defines and describes the format of some number of samples in a track
3.1.12
Sample Table
packed directory for the timing and physical layout of the samples in a track
3.1.13
Track
Collection of related samples (q.v.) in an ISO base media file. For media data, a track corresponds to a
sequence of images or sampled audio. For hint tracks, a track corresponds to a streaming channel.
3.2 Abbreviated terms
ALC Asynchronous Layered Coding
FD File Delivery
FDT File Delivery Table
FEC Forward Error Correction
FLUTE File Delivery over Unidirectional Transport
IANA Internet Assigned Numbers Authority
LCT Layered Coding Transport
MBMS Multimedia Broadcast/Multicast Service
In 4.2 Object Structure, after "The fields in the objects are stored with the most significant byte first, commonly
known as network byte order or big-endian format.", insert the following:
When fields smaller than a byte are defined, or fields span a byte boundary, the bits are assigned from the
most significant bits in each byte to the least significant. For example, a field of two bits followed by a field of
six bits has the two bits in the high order bits of the byte.
In 4.3.1, add the following at the end of the subclause:
All file format brands defined in this specification are included in Annex E with a summary of which features
they require.
2 © ISO/IEC 2008 – All rights reserved
---------------------- Page: 5 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
In 6.2.3, add the following entries at the end of Table 1 (correctly cross-referenced):
fiin 8.46.2 file delivery item information
paen 8.46.2 partition entry
fpar 8.46.3 file partition
fecr 8.46.4 FEC reservoir
segr 8.46.5 file delivery session group
group id to name
gitn 8.46.6
tsel 8.48.2 track selection
meco 8.44.9 additional metadata container
mere 8.44.10 metabox relation
In 8.6.3, add the following reference_type to the end of the list:
• ‘hind’ this track depends on the referenced hint track, i.e., it should only be used if the referenced
hint track is used.
In 8.9.3, replace:
handler_type when present in a meta box, contains an appropriate value to indicate the format of the
meta box contents
with:
handler_type when present in a meta box, contains an appropriate value to indicate the format of the
meta box contents. The value ‘null’ can be used in the primary meta box to indicate that it is
merely being used to hold resources.
In 8.44.1.1, replace:
“Box type: … Zero or one”, i.e. the first four lines at the beginning,
with:
Box Type: ‘meta’
Container: File, Movie Box (‘moov’), Track Box (‘trak’), or Additional Metadata Container Box (‘meco’)
Mandatory: No
Quantity: Zero or one (in File, ‘moov’, and ‘trak’), One or more (in ‘meco’)
In 8.44.1.1 Definition, replace:
At most one meta box may occur at each of the file level, movie level, or track level.
with:
At most one meta box may occur at each of the file level, movie level, or track level, unless they are contained
in an additional metadata container box (‘meco’).
© ISO/IEC 2008 – All rights reserved 3
---------------------- Page: 6 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
In 8.44.6.1, insert the following text at the end of the subclause:
Two versions of the item info entry are defined. Version 1 includes additional information to version 0 as
specified by an extension type. For instance, it shall be used with extension type 'fdel' for items that are
referenced by the file partition box ('fpar'), which is defined for source file partitionings and applies to file
delivery transmissions.
If no extension is desired, the box may terminate without the extension_type field and the extension; if, in
addition, content_encoding is not desired, that field also may be absent and the box terminate before it. If an
extension is desired without an explicit content_encoding, a single null byte, signifying the empty string, must
be supplied for the content_encoding, before the indication of extension_type.
In 8.44.6.2, replace the entire text with the following:
aligned(8) class ItemInfoExtension(unsigned int(32) extension_type)
{
}
aligned(8) class FDItemInfoExtension() extends ItemInfoExtension (’fdel’)
{
string content_location;
string content_MD5;
unsigned int(64) content_length;
unsigned int(64) transfer_length;
unsigned int(8) entry_count;
for (i=1; i <= entry_count; i++)
unsigned int(32) group_id;
}
aligned(8) class ItemInfoEntry
extends FullBox(‘infe’, version, 0) {
if ((version == 0) || (version == 1)) {
unsigned int(16) item_ID;
unsigned int(16) item_protection_index
string item_name;
string content_type;
string content_encoding; //optional
}
if (version == 1) {
unsigned int(32) extension_type; //optional
ItemInfoExtension(extension_type); //optional
}
}
aligned(8) class ItemInfoBox
extends FullBox(‘iinf’, version = 0, 0) {
unsigned int(16) entry_count;
ItemInfoEntry[ entry_count ] item_infos;
}
In 8.44.6.3, replace the entire text with the following:
item_id contains either 0 for the primary resource (e.g., the XML contained in an ‘xml ‘ box) or the ID of
the item for which the following information is defined.
item_protection_index contains either 0 for an unprotected item, or the one-based index into the
item protection box defining the protection applied to this item (the first box in the item protection box
has the index 1).
item_name is a null-terminated string in UTF-8 characters containing a symbolic name of the item
(source file for file delivery transmissions).
4 © ISO/IEC 2008 – All rights reserved
---------------------- Page: 7 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
content_type is a null-terminated string in UTF-8 characters with the MIME type of the item. If the item
is content encoded (see below), then the content type refers to the item after content decoding.
content_encoding is an optional null-terminated string in UTF-8 characters used to indicate that the
binary file is encoded and needs to be decoded before interpreted. The values are as defined for
Content-Encoding for HTTP/1.1. Some possible values are “gzip”, “compress” and “deflate”. An
empty string indicates no content encoding. Note that the item is stored after the content encoding
has been applied.
extension_type is a is a printable four-character code that identifies the extension fields of version 1
w.r.t. version 0 of the Item information entry.
content_location is a null-terminated string in UTF-8 characters containing the URI of the file as
defined in HTTP/1.1 (RFC 2616).
content_MD5 is a null-terminated string in UTF-8 characters containing an MD5 digest of the file. See
HTTP/1.1 (RFC 2616) and RFC 1864.
content_length gives the total length (in bytes) of the (un-encoded) file.
transfer_length gives the total length (in bytes) of the (encoded) file. Note that transfer length is
equal to content length if no content encoding is applied (see above).
entry_count provides a count of the number of entries in the following array.
group_ID indicates a file group to which the file item (source file) belongs. See 3GPP TS 26.346 for
more details on file groups.
Add the following subclauses before 8.45:
8.44.9 Additional Metadata Container Box
8.44.9.1 Definition
Box Type: ‘meco’
Container: File, Movie Box (‘moov’), or Track Box (‘trak’)
Mandatory: No
Quantity: Zero or one
The additional metadata container box includes one or more meta boxes. It can be carried at the top level of
the file, in the Movie Box (‘moov’), or in the Track Box (‘trak’) and shall only be present if it is accompanied by
a meta box in the same container. A meta box that is not contained in the additional metadata container box is
the preferred (primary) meta box. Meta boxes in the additional metadata container box complement or give
alternative metadata information. The usage of multiple meta boxes may be desirable when, e.g., a single
handler is not capable of processing all metadata. All meta boxes at a certain level, including the preferred
one and those contained in the additional metadata container box, must have different handler types.
A meta box contained in an additional metadata container box shall contain a primary Item box or the primary
data box required by the handler (e.g., an XML Box). It shall not include boxes or syntax elements concerning
items other than the primary item indicated by the present primary item box or XML box. URLs in a meta box
contained in an additional metadata container box are relative to the context of the preferred meta box.
8.44.9.2 Syntax
aligned(8) class AdditionalMetadataContainerBox extends Box('meco') {
}
© ISO/IEC 2008 – All rights reserved 5
---------------------- Page: 8 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
8.44.10 Metabox Relation Box
8.44.10.1 Definition
Box Type: ‘mere’
Container: Additional Metadata Container Box (‘meco’)
Mandatory: No
Quantity: Zero or more
The metabox relation box indicates a relation between two meta boxes at the same level, i.e., the top level of
the file, the Movie Box, or Track Box. The relation between two meta boxes is unspecified if there is no
metabox relation box for those meta boxes. Meta boxes are referenced by specifying their handler types.
8.44.10.2 Syntax
aligned(8) class MetaboxRelationBox
extends FullBox('mere', version=0, 0) {
unsigned int(32) first_metabox_handler_type;
unsigned int(32) second_metabox_handler_type;
unsigned int(8) metabox_relation;
}
8.44.10.3 Sematics
first_metabox_handler_type indicates the first meta box to be related.
second_metabox_handler_type indicates the second meta box to be related.
metabox_relation indicates the relation between the two meta boxes. The following values are
defined:
1 the relationship between the boxes is unknown (which is the default when this box is
not present);
2 the two boxes are semantically un-related (e.g., one is presentation, the other
annotation);
3 the two boxes are semantically related but complementary (e.g., two disjoint sets of
meta-data expressed in two different meta-data systems);
4 the two boxes are semantically related but overlap (e.g., two sets of meta-data
neither of which is a subset of the other); neither is ‘preferred’ to the other;
5 the two boxes are semantically related but the second is a proper subset or weaker
version of the first; the first is preferred;
6 the two boxes are semantically related and equivalent (e.g., two essentially identical
sets of meta-data expressed in two different meta-data systems).
Add the following subclauses before Clause 9:
8.46 File Delivery Format Extensions
8.46.1 Introduction
Files intended for transmission over ALC/LCT or FLUTE are stored as items in a top-level meta box (‘meta’).
The item location box (‘iloc’) specifies the actual storage location of each item within the container file as well
as the file size of each item. File name, content type (MIME type), etc., of each item are provided by version 1
of the item information box (‘iinf’).
6 © ISO/IEC 2008 – All rights reserved
---------------------- Page: 9 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
Pre-computed FEC reservoirs are stored as additional items in the meta box. If a source file is split into
several source blocks, FEC reservoirs for each source block are stored as separate items. The relationship
between FEC reservoirs and original source items is recorded in the partition entry box ('paen') located in the
FD item information box ('fiin').
See Clause 11 for more details on the usage of the file delivery format.
8.46.2 FD Item Information Box
8.46.2.1 Definition
Box Type: ‘fiin’
Container: Meta Box (‘meta’)
Mandatory: No
Quantity: Zero or one
The FD item information box is optional, although it is mandatory for files using FD hint tracks. It provides
information on the partitioning of source files and how FD hint tracks are combined into FD sessions. Each
partition entry provides details on a particular file partitioning, FEC encoding and associated FEC reservoirs. It
is possible to provide multiple entries for one source file (identified by its item ID) if alternative FEC encoding
schemes or partitionings are used in the file. All partition entries are implicitly numbered and the first entry has
number 1.
8.46.2.2 Syntax
aligned(8) class PartitionEntry extends Box('paen') {
FilePartitionBox blocks_and_symbols;
FECReservoirBox FEC_symbol_locations; //optional
}
aligned(8) class FDItemInformationBox
extends FullBox('fiin', version = 0, 0) {
unsigned int(16) entry_count;
PartitionEntry partition_entries[ entry_count ];
FDSessionGroupBox session_info; //optional
GroupIdToNameBox group_id_to_name; //optional
}
8.46.2.3 Semantics
entry_count provides a count of the number of entries in the following array.
The semantics of the boxes are described where the boxes are documented.
8.46.3 File Partition Box
8.46.3.1 Definition
Box Type: ‘fpar’
Container: Partition Entry (‘paen’)
Mandatory: Yes
Quantity: Exactly one
The File Partition box identifies the source file and provides a partitioning of that file into source blocks and
symbols. Further information about the source file, e.g., filename, content location and group IDs, is contained
in the Item Information box ('iinf'), where the Item Information entry corresponding to the item ID of the source
file is of version 1 and includes a File Delivery Item Information Extension ('fdel').
© ISO/IEC 2008 – All rights reserved 7
---------------------- Page: 10 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
8.46.3.2 Syntax
aligned(8) class FilePartitionBox
extends FullBox('fpar', version = 0, 0) {
unsigned int(16) item_ID;
unsigned int(16) packet_payload_size;
unsigned int(8) reserved = 0;
unsigned int(8) FEC_encoding_ID;
unsigned int(16) FEC_instance_ID;
unsigned int(16) max_source_block_length;
unsigned int(16) encoding_symbol_length;
unsigned int(16) max_number_of_encoding_symbols;
string scheme_specific_info;
unsigned int(16) entry_count;
for (i=1; i <= entry_count; i++) {
unsigned int(16) block_count;
unsigned int(32) block_size;
}
}
8.46.3.3 Semantics
item_ID references the item in the item location box ('iloc') that the file partitioning applies to.
packet_payload_size gives the target ALC/LCT or FLUTE packet payload size of the partitioning
algorithm. Note that UDP packet payloads are larger, as they also contain ALC/LCT or FLUTE
headers.
FEC_encoding_ID identifies the FEC encoding scheme and is subject to IANA registration (see RFC
3452). Note that i) value zero corresponds to the "Compact No-Code FEC scheme" also known as
"Null-FEC" (RFC 3695); ii) value one corresponds to the “MBMS FEC” (3GPP TS 26.346); iii) for
values in the range of 0 to 127, inclusive, the FEC scheme is Fully-Specified, whereas for values in
the range of 128 to 255, inclusive, the FEC scheme is Under-Specified.
FEC_instance_ID provides a more specific identification of the FEC encoder being used for an Under-
Specified FEC scheme. This value should be set to zero for Fully-Specified FEC schemes and shall
be ignored when parsing a file with FEC_encoding_ID in the range of 0 to 127, inclusive.
FEC_instance_ID is scoped by the FEC_encoding_ID. See RFC 3452 for further details.
max_source_block_length gives the maximum number of source symbols per source block.
encoding_symbol_length gives the size (in bytes) of one encoding symbol. All encoding symbols of
one item have the same length, except the last symbol which may be shorter.
max_number_of_encoding_symbols gives the maximum number of encoding symbols that can be
generated for a source block for those FEC schemes in which the maximum number of encoding
symbols is relevant, such as FEC encoding ID 129 defined in RFC 3452. For those FEC schemes in
which the maximum number of encoding symbols is not relevant, the semantics of this field is
unspecified.
scheme_specific_info is a base64-encoded null-terminated string of the scheme-specific object
transfer information (FEC-OTI-Scheme-Specific-Info). The definition of the information depends on the
FEC encoding ID.
entry_count gives the number of entries in the list of (block_count, block_size) pairs that provides a
partitioning of the source file. Starting from the beginning of the file, each entry indicates how the next
segment of the file is divided into source blocks and source symbols.
block_count indicates the number of consecutive source blocks of size block_size.
block_size indicates the size of a block (in bytes). A block_size that is not a multiple of the
encoding_symbol_length symbol size indicates that the last source symbol includes padding that is
not stored in the item.
8 © ISO/IEC 2008 – All rights reserved
---------------------- Page: 11 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
8.46.4 FEC Reservoir Box
8.46.4.1 Definition
Box Type: ‘fecr’
Container: Partition Entry (‘paen’)
Mandatory: No
Quantity: Zero or One
The FEC reservoir box associates the source file identified in the file partition box ('fpar') with FEC reservoirs
stored as additional items. It contains a list that starts with the first FEC reservoir associated with the first
source block of the source file and continues sequentially through the source blocks of the source file.
8.46.4.2 Syntax
aligned(8) class FECReservoirBox
extends FullBox('fecr', version = 0, 0) {
unsigned int(16) entry_count;
for (i=1; i <= entry_count; i++) {
unsigned int(16) item_ID;
unsigned int(32) symbol_count;
}
8.46.4.3 Semantics
entry_count gives the number of entries in the following list. An entry count here should match the
total number or blocks in the corresponding file partition box.
item_ID indicates the location of the FEC reservoir associated with a source block.
symbol_count indicates the number of repair symbols contained in the FEC reservoir.
8.46.5 FD Session Group Box
8.46.5.1 Definition
Box Type: ‘segr’
Container: FD Information Box (‘fiin’)
Mandatory: No
Quantity: Zero or One
The FD session group box is optional, although it is mandatory for files containing more than one FD hint
track. It contains a list of sessions as well as all file groups and hint tracks that belong to each session. An FD
session sends simultaneously over all FD hint tracks (channels) that are listed in the FD session group box for
a particular FD session.
Only one session group should be processed at any time. The first listed hint track in a session group
specifies the base channel. If the server has no preference between the session groups, the default choice
should be the first session group. The group IDs of all file groups containing the files referenced by the hint
tracks shall be included in the list of file groups. The file group IDs can in turn be translated into file group
names (using the group ID to name box) that can be included by the server in FDTs.
8.46.5.2 Syntax
aligned(8) class FDSessionGroupBox extends Box('segr') {
unsigned int(16) num_session_groups;
for(i=0; i < num_session_groups; i++) {
unsigned int(8) entry_count;
for (j=0; j < entry_count; j++) {
unsigned int(32) group_ID;
© ISO/IEC 2008 – All rights reserved 9
---------------------- Page: 12 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
}
unsigned int(16) num_channels_in_session_group;
for(k=0; k < num_channels_in_session_group; k++) {
unsigned int(32) hint_track_id;
}
}
}
8.46.5.3 Semantics
num_session_groups specifies the number of session groups.
entry_count gives the number of entries in the following list comprising all file groups that the session
group complies with. The session group contains all files included in the listed file groups as specified
by the item information entry of each source file. Note that the FDT for the session group should only
contain those groups that are listed in this structure.
group_ID indicates a file group that the session group complies with.
num_channels_in_session_groups specifies the number of channels in the session group. The
value of num_channels_in_session_groups shall be a positive integer.
hint_track_ID specifies the track ID of the FD hint track belonging to a particular session group. Note
that one FD hint track corresponds to one LCT channel.
8.46.6 Group ID to Name Box
8.46.6.1 Definition
Box Type: ‘gitn’
Container: FD Information Box (‘fiin’)
Mandatory: No
Quantity: Zero or One
The Group ID to Name box associates file group names to file group IDs used in the version 1 item
information entries in the item information box ('iinf').
8.46.6.2 Syntax
aligned(8) class GroupIdToNameBox
extends FullBox('gitn', version = 0, 0) {
unsigned int(16) entry_count;
for (i=1; i <= entry_count; i++) {
unsigned int(32) group_ID;
string group_name;
}
}
8.46.6.3 Semantics
entry_count gives the number of entries in the following list.
group_ID indicates a file group.
group_name is a null-terminated string in UTF-8 characters containing a file group name.
8.47 Rate Share Extensions
8.47.1 Introduction
Rate share instructions are used by players and streaming servers to help allocating bitrates dynamically
when several streams share a common bandwidth resource. The instructions are stored in the file as sample
group entries and apply when scalable or alternative media streams at different bitrates are combined with
10 © ISO/IEC 2008 – All rights reserved
---------------------- Page: 13 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
other scalable or alternative tracks. The instructions are time-dependent as samples in a track may be
associated with different sample group entries. In the simplest case, only one target rate share value is
specified per media and time range as illustrated in Figure 4.
Figure 4 — Audio/Video rate share as function of time
In order to accommodate for rate share values that vary with the available bitrate, it is possible to specify more
than one operation range. One may for instance indicate that audio requires a higher percentage (than video)
at low available bitrates. Technically this is done by specifying two operation points as shown in Figure 5.
Figure 5 — Audio rate share as function of available bitrate
© ISO/IEC 2008 – All rights reserved 11
Audio Rate Share (%) A / V Rate Share (%)
---------------------- Page: 14 ----------------------
ISO/IEC 15444-12:2005/Amd.2:2008(E)
Operation points are defined in terms of total available bandwidth. For more complex situations it is possible to
specify more operation points.
In addition to target rate share values, it is also possible to specify maximum and minimum bitrates for a
certain media, as well as discard priority.
8.47.2 Rate Share Sample Group Entry
8.47.2.1 Definition
Each sample of a track may be associated to (zero or) one of a number of sample group descriptions, each of
which defines a record of rate-share information. Typically the same rate-share information applies to many
consecutive samples and it may therefore be enough to define two or three sample group descriptions that
can be used at different time intervals.
The grouping type 'rash' (short for rate share) is defined as the grouping criterion for rate share information.
Zero or one sample-to-group box ('sbgp') for the grouping type 'rash' can be contained in the sample table box
('stbl') of a track. It shall reside in a hint track, if a hint track is used, otherwise in a media track.
Target rate share may be specified for several operation points that a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.