iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 6553:1980

(Main)

Automatic steam traps — Marking

Automatic steam traps — Marking

The purpose is to establish certain basic requirements for the marking of steam traps, and to give recommendations for additional information markings. Has, in general, to be considered in conjunction with the specific requirements which may be agreed between the partners concerned. Specifies mandatory and optional markings for steam traps.

Purgeurs automatiques de vapeurs d'eau — Marquage

La présente Norme internationale spécifie les marques obligatoires et les marques facultatives à porter sur les purgeurs automatiques de vapeur d'eau.

General Information

Status
Withdrawn
Publication Date
30-Sep-1980
Withdrawal Date
30-Sep-1980
ICS
23.060.01 - Valves in general
Technical Committee
ISO/TC 153 - Valves
Drafting Committee
ISO/TC 153 - Valves
Current Stage
9599 - Withdrawal of International Standard
Completion Date
08-Dec-2016
Ref Project

Relations

Revised
ISO 6553:2016 - Automatic steam traps — Marking
Effective Date
10-Aug-2013

Buy Standard

ISO 6553:1980 - Automatic steam traps -- MarkingISO 6553:1980 - Automatic steam traps -- Marking
PreviousNext
Standard
ISO 6553:1980 - Automatic steam traps -- Marking
English language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- MarquageISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
PreviousNext
Standard
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- MarquageISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
PreviousNext
Standard
ISO 6553:1980 - Purgeurs automatiques de vapeurs d'eau -- Marquage
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International Standard
INTERNATlONAL ORGANIZATION FOR STANDARDIZATION.MEXJlYHAPO~HAfl OPl-AHM3ALWlfl fl0 CTAH~APTM3ALWl@ORGANISATION INTERNATIONALE DE NORMALlSATlON
Automatic steam traps - Marking
Purgeurs automatiques de vapeur d’eau - Marquage
First edition - 1980-10-15
Ref. No. ISO 65534980 (E)
UDC 621.186.6
Descriptors : industrial valves, traps, steam, marking.
Price based O;I 1 page

---------------------- Page: 1 ----------------------
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of
national Standards institutes (ISO member bedies). The work of developing Inter-
national Standards is carried out through ISO technical committees. Every member
body interested in a subject for which a technical committee has been set up has the
right to be represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the ISO Council.
International Standard ISO 6553 was developed by Technical Committee ISO/TC 153,
Genera/ purpose industrial valves, and was circulated to the member bodies in
March 1979.
It has been approved by the member bodies of the following countries :
Austria India Romania
Belgium Italy Sweden
Canada Japan Switzerla nd
Chile Korea, Rep. of United Kingdom
Denmark Libyan Arab Jamahiriya USA
Finland Netherlands USSR
France Norway
Germany, F. R. Poland
The mem ber countries expressed disapproval of the document
bodies of the following
on techni cal grounds :
Australia
Czechoslovakia
South Africa, Rep. of
0 International Organkation for Standardkation,. 1980
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 65534980 (IE)
INTERNATIONAL STANDARD
Automatic steam traps - Marking
0 introduc
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWblE~YHAPOfiHAR OPI-AHM3A~MR fl0 CTAH&WTM3A~MM@ORGANISATION INTERNATIONALE DE NORMALISATION
Purgeurs automatiques de vapeur d’eau - Marquage
Automa tic steam traps - Marking
Première édition - 19804045
Réf. no : ISO 65534980 (F)
CDU 621.186.6
Descripteurs : robinetterie industrielle, purgeur, vapeur d’eau sous pression, marquage.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comite membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 6553 a été élaborée par le comité technique ISO/TC 153,
Robinetterie industrielle pour les usages courants, et a été soumise aux comités mem-
bres en mars 1979.
Les comités membres des pays suivants l’ont approuvée :
Allemagne, R. F. France Roumanie
Autriche Inde
Royaume-Uni
Belgique Italie Suéde
Canada
Jamahiriya arabe libyenne Suisse
Chili Japon URSS
Corée, Rép. de Norvége USA
Danemark
Pays-Bas
Finlande Pologne
Les comités membres des désapprouvée
suivants l’ont pour des raisons techni-
Pays
ques :
Afrique du Sud, Rép. d’
Australie
Tchécoslovaquie
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 6553-1980 (F)
NORME INTERNATIONALE
Purgeurs automatiques de vapeur d’eau - Marquage
4 Marquage obligatoire
0 Introduction
Le but de la présente Norme internationale est d’établir certai- Les informations suivantes doivent être obligato
...

Norme internationale
INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWblE~YHAPOfiHAR OPI-AHM3A~MR fl0 CTAH&WTM3A~MM@ORGANISATION INTERNATIONALE DE NORMALISATION
Purgeurs automatiques de vapeur d’eau - Marquage
Automa tic steam traps - Marking
Première édition - 19804045
Réf. no : ISO 65534980 (F)
CDU 621.186.6
Descripteurs : robinetterie industrielle, purgeur, vapeur d’eau sous pression, marquage.
Prix basé sur 1 page

---------------------- Page: 1 ----------------------
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comite membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non gouverne-
mentales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont soumis
aux comités membres pour approbation, avant leur acceptation comme Normes inter-
nationales par le Conseil de I’ISO.
La Norme internationale ISO 6553 a été élaborée par le comité technique ISO/TC 153,
Robinetterie industrielle pour les usages courants, et a été soumise aux comités mem-
bres en mars 1979.
Les comités membres des pays suivants l’ont approuvée :
Allemagne, R. F. France Roumanie
Autriche Inde
Royaume-Uni
Belgique Italie Suéde
Canada
Jamahiriya arabe libyenne Suisse
Chili Japon URSS
Corée, Rép. de Norvége USA
Danemark
Pays-Bas
Finlande Pologne
Les comités membres des désapprouvée
suivants l’ont pour des raisons techni-
Pays
ques :
Afrique du Sud, Rép. d’
Australie
Tchécoslovaquie
0 Organisation internationale de normalisation, 1980
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 6553-1980 (F)
NORME INTERNATIONALE
Purgeurs automatiques de vapeur d’eau - Marquage
4 Marquage obligatoire
0 Introduction
Le but de la présente Norme internationale est d’établir certai- Les informations suivantes doivent être obligato
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 5117:2023(Main)
Automatic steam traps — Production and performance characteristic tests

This document specifies the production and performance relevant test requirements for automatic steam traps used for condensate removal/recovery services for optimized utilization of energy, in refinery, power generation or other general applications where steam is used as a medium of heat transfer. The tests can be classified as production tests and performance characteristic tests and can be conducted to ensure the correct functioning of a steam trap or to evaluate the performance of a particular design. This document specifies the tests performed relative to each one of these two categories and briefly describes the corresponding test methods.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
  • Draft
    31 pages
    English language
    sale 15% off
  • Draft
    31 pages
    English language
    sale 15% off
ISO
ISO 10497:2022(Main)
Testing of valves — Fire type-testing requirements

This document specifies fire type-testing requirements and a fire type-test method for soft- and metal-seated isolation valves with one or more obturators. It is not applicable to the testing requirements for valve actuators other than manually operated gearboxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) can need special protection to operate in the environment considered in this valve test, and the fire testing of such actuators is outside the scope of this document. This document specifies the measurement and assessment criteria for: a) through-seat leakage; b) external leakage; c) cavity overpressure relief of double-seated valves; d) operability. This document specifies the rules whereby the fire-type testing qualification for a valve can be extended to untested sizes, pressure ratings and materials of construction of the same basic design type. Fire test reports of valves tested according to previous editions of this document are acceptable when submitted together with the full and compliant fire test report as per 6.7 of the edition under which it was tested. Any data missing as required from 6.7 within the fire test report are accepted or rejected at the purchaser’s discretion. NOTE For the purposes of this document, the terms “fire type-test” and “fire test” are synonymous.

  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    21 pages
    French language
    sale 15% off
ISO
ISO 28921-1:2022(Main)
Industrial valves — Isolating valves for low-temperature applications — Part 1: Design, manufacturing and production testing

This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: — valves of nominal sizes DN: 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600; 1 650; 1 800, — corresponding to nominal pipe sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72, and applies to pressure designations: — PN 16; 25; 40; 100; 160; 250; 400, — Class 150; 300; 600; 800; 900; 1 500; 2 500. NOTE Not all type and size combination are available in all pressure ratings. This document does not apply to safety valves and control valves.

  • Standard
    27 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 5752:2021(Main)
Metal valves for use in flanged pipe systems — Face-to-face and centre-to-face dimensions

This document specifies the basic series of face-to-face (FTF) and centre-to-face (CTF) dimensions for two-way metal valves of the gate, globe, diaphragm, ball, plug, butterfly design types used as isolating and check valves in flanged pipe systems. Each basic series of face-to-face and centre-to-face dimensions can be used as required with flanges of mating dimensions conforming to the equivalent EN or ASME flange series. This document covers valves with the following PN, Class, DN and NPS values: — PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400; — Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500; — DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 650; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 050; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000; — corresponding to nominal sizes NPS: ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 36; 40; 42; 48; 56; 64; 72; 80. NOTE See Annex B for the relationship between DN and NPS.

  • Standard
    35 pages
    English language
    sale 15% off
  • Draft
    35 pages
    English language
    sale 15% off
ISO
ISO 23632:2021(Main)
Industrial valves — Design validation-testing of valves

Le présent document spécifie les exigences et les critères d’acceptation pour les essais de type, conformes aux conditions de conception, des robinets à tournant sphérique métalliques et robinets à papillon métalliques utilisés pour des services de sectionnement pour toutes les applications industrielles, et sert à valider la conception des produits sur 205 cycles. Le présent document exclut les essais de dispositifs de sécurité, de robinets de régulation, de robinets en matériaux thermoplastiques, et des robinets pour l’alimentation en eau destinée à la consommation humaine et en eaux usées (par exemple la série EN 1074). Le présent document définit la procédure permettant d’étendre la qualification de l’appareil de robinetterie soumis à l’essai à des désignations de dimensions et de pression non soumises à l’essai de la même gamme de produits. Cet essai de type a pour objet de valider la performance de siège pour la relation pression/température précisée par le fabricant, qui figure dans la documentation technique du produit donnée par le fabricant. Cet essai de type vérifie les exigences de couple et le couple de manœuvre maximale admissible (MAST), tels que donnés dans la documentation technique du fabricant. Cet essai de type valide la durabilité de la performance de siège et le couple de manœuvre grâce à des cycles mécaniques et thermiques.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 22109:2020(Main)
Industrial valves — Gearbox for valves

This document provides basic requirements for gearboxes to operate industrial valves for manual and automated on/off and modulating duties, this includes manual override gearboxes. It includes guidelines for classification, design and methods for conformity assessment. It does not cover gear systems which are integral part in the design of valves and subsea gearboxes. Other requirements or conditions of use different from those indicated in this document are agreed between the purchaser and the manufacturer or supplier (first party), prior to order.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    French language
    sale 15% off
ISO
ISO 22153:2020(Main)
Electric actuators for industrial valves — General requirements

This document provides basic requirements for electric valve actuators, used for on-off and control valves. It includes guidelines for classification, design, enclosure and corrosion protection, and methods for conformity assessment. Combinations of electric actuators and gearboxes when supplied by the actuator manufacturer are within the scope of this document. This document does not cover solenoid actuators, electro-hydraulic actuators and electric actuators which are integral to the valves. Other requirements or conditions of use different from those indicated in this document are agreed between the purchaser and the manufacturer/supplier, prior to order.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
ISO
ISO 5209:2019(Main)
General purpose industrial valves — Marking
SIST ISO 5209:2023

This document specifies the requirements for the mandatory and optional markings of general purpose industrial valves. It defines the method of applying the markings, on the body, on a flange, on an identification plate or any other location. This document is considered in conjunction with the specified requirements of the valve product standards or valve performance standards. The marking requirements for plastic valves are not within the scope of this document.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    6 pages
    English language
    sale 15% off
ISO
ISO 19240:2017(Main)
Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries

ISO 19240:2017 specifies requirements for design, dimensions, material, fabrication and production testing of lined metal quarter turns valves (plug valves, butterfly valves, ball valves) and check valves with flanged, wafer and wafer lug body types. It covers valves of the nominal sizes, DN: - 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 750, 800, 900, 1 000, 1 200; corresponding to nominal pipe sizes, NPS 1/2 to NPS 48, and applies to pressure designations: - PN 10, 16, 25, 40; - Class 150, 300.

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 5210:2017(Main)
Industrial valves — Multi-turn valve actuator attachments

ISO 5210:2017 specifies the requirements for the attachment of multi-turn actuators to valves. Throughout this document, "actuator" may be understood as "actuator and/or gearbox" providing a multi-turn and/or linear output. ISO 5210:2017 specifies: - flange dimensions necessary for the attachment of actuators to industrial valves [see Figure 1 a)] or to intermediate supports [see Figure 1 b)]; - those driving component dimensions of actuators which are necessary to attach them to the driven components; - reference values for torque and thrust for flanges having the dimensions specified in this document.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off