ISO 16847
(Main)Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing
Textiles — Test method for assessing the matting appearance of napped fabrics after cleansing
ISO 16847:2016 specifies a method for assessing the matting appearance of the napped fabrics (fleece fabrics) tested, after one or several cleansing treatments. This method has been developed for use primarily with Type B domestic washing machines, as defined in ISO 6330, in the cleansing process. However, it is possible to use it with Type A machines, as defined in ISO 6330. This test method can be used for judging matting appearance after other cleansing processes.
Textiles — Méthode d'essai pour l'évaluation de l'aspect du moutonnement des étoffes grattées après nettoyage
ISO 16847:2016 spécifie une méthode permettant d'évaluer l'aspect du moutonnement des étoffes grattées (molleton) soumises à essai, après un ou plusieurs traitements de nettoyage. Cette méthode est destinée à être mise en ?uvre principalement en utilisant des machines à laver à usage domestique du type B, telles que définies dans l'ISO 6330, pour le procédé de nettoyage. Il est toutefois possible d'utiliser des machines du type A selon la définition de l'ISO 6330. Cette méthode d'essai peut être utilisée pour juger l'aspect du moutonnement après d'autres procédés de nettoyage.
General Information
Relations
Buy Standard
Standards Content (Sample)
FINAL DRAFT
International
Standard
ISO/FDIS 16847
ISO/TC 38/SC 2
Textiles — Test method for
Secretariat: SAC
assessing the matting appearance of
Voting begins on:
napped fabrics after cleansing
2024-12-11
Textiles — Méthode d'essai pour l'évaluation de l'aspect du
Voting terminates on:
moutonnement des étoffes grattées après nettoyage
2025-02-05
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 16847:2024(en) © ISO 2024
FINAL DRAFT
ISO/FDIS 16847:2024(en)
International
Standard
ISO/FDIS 16847
ISO/TC 38/SC 2
Textiles — Test method for
Secretariat: SAC
assessing the matting appearance of
Voting begins on:
napped fabrics after cleansing
Textiles — Méthode d'essai pour l'évaluation de l'aspect du
Voting terminates on:
moutonnement des étoffes grattées après nettoyage
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 16847:2024(en) © ISO 2024
ii
ISO/FDIS 16847:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test specimens . 3
7 Procedure . 3
8 Expression of results . 4
9 Test report . 4
iii
ISO/FDIS 16847:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing,
finishing and water resistance tests.
This second edition cancels and replaces the first edition (ISO 16847:2016), which has been technically
revised.
The main changes are as follows:
— the definition of “napped fabric” (3.1) has been added (and the former 3.1 has been renumbered as 3.2);
— a new subclause 7.12 has been added to introduce the possibility of using photographic rating standards;
— in Clause 9, the test report has been updated, including the introduction of the possibility to use
photographic rating standards in items e) and h).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/FDIS 16847:2024(en)
Introduction
With use, the surface of napped fabrics changes significantly. This change in appearance, known as matting,
is more or less severe and is related to the fibre, fabric or finishing characteristics.
Based on the structure of other ISO standards dealing with the change in appearance after cleansing, this
document has been elaborated to solve this situation.
v
--------
...
Formatted: Left
Style Definition
...
ISO/FDIS 16847:2024(en)
Formatted: French (Switzerland)
ISO/TC 38/SC 2
Formatted: zzCover large
Formatted: Left: 1.5 cm, Right: 1.5 cm, Bottom: 1 cm,
Secretariat: SAC
Gutter: 0 cm, Footer distance from edge: 1.27 cm
Formatted: French (Switzerland)
Date: 2024-08-2911-26
Formatted
...
Formatted: English (United Kingdom)
Formatted: Cover Title_A1
Textiles — Test method for assessing the matting appearance of
napped fabrics after cleansing
Textiles — Méthode d'essai pour l'évaluation de l'aspect du moutonnement des étoffes grattées après nettoyage
FDIS stage
Formatted: Left
ISO/FDIS 16847:2024(en) Formatted: HeaderCentered
Formatted: Font: Bold
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
at the address below or ISO'sISO’s member body in the country of the requester.
ISO Copyright Officecopyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva Formatted: zzCopyright address, Adjust space between Latin
and Asian text, Adjust space between Asian text and numbers
Phone: + 41 22 749 01 11
Formatted: French (Switzerland)
Email: copyright@iso.org
E-mail: copyright@iso.org
Website: www.iso.orgwww.iso.org
Formatted: zzCopyright address, Adjust space between Latin
and Asian text, Adjust space between Asian text and numbers
Published in Switzerland.
Formatted: FooterPageRomanNumber
ii
ISO/FDIS 16847:2024(en) Formatted: HeaderCentered, Left
Formatted: Font: 11 pt
Formatted: Font: Bold
Contents
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test specimens . 4
7 Procedure . 4
8 Expression of results . 5
9 Test report . 5
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
Figure 1 — Example of matting appearance of napped fabric . 2
4 Principle . 2
5 Apparatus . 2
Figure 2 — Lighting equipment for viewing test specimens . 3
6 Test specimens . 3
7 Procedure . 3
Table 1 — Matting grading scheme . 4
8 Expression of results . 4
9 Test report . 4
Formatted: Font: 10 pt
Formatted: FooterCentered, Left, Space Before: 0 pt, Tab
stops: Not at 17.2 cm
Formatted: Font: 10 pt
Formatted: Font: 10 pt
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber, Left, Space After: 0
pt, Tab stops: Not at 17.2 cm
© ISO 2024 – All rights reserved
iii
ISO/FDIS 16847:2024(en) Formatted: HeaderCentered
Formatted: Font: Bold
Formatted: Adjust space between Latin and Asian text,
Foreword
Adjust space between Asian text and numbers
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives). Formatted: English (United Kingdom)
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents.www.iso.org/patents. ISO shall not be held responsible for identifying any or all such
patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html. Formatted: English (United Kingdom)
This document was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 2, Cleansing, Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
finishing and water resistance tests.
This second edition cancels and replaces the first edition (ISO 16847:2016), which has been technically Formatted: Default Paragraph Font
revised.
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
The main changes are as follows:
Formatted: Adjust space between Latin and Asian text,
— — the definition of “napped fabric” (3.1)(3.1) has been added (and the former 3.1 has been renumbered
Adjust space between Asian text and numbers, Tab stops: Not
as 3.2);3.2);
at 0.7 cm + 1.4 cm + 2.1 cm + 2.8 cm + 3.5 cm + 4.2
cm + 4.9 cm + 5.6 cm + 6.3 cm + 7 cm
— — a new subclause (7.12) 7.12 has been added to introduce the possibility of using photographic rating
standards;
— — in Clause 9,in Clause 9, the test report has been updated, including the introduction of the possibility
to use photographic rating standards in items e) and h).
Any feedback or questions on this document should be directed to the user’s national standards body. A Formatted: English (United Kingdom)
complete listing of these bodies can be found at www.iso.org/members.htmlwww.iso.org/members.html.
Formatted: English (United Kingdom)
Formatted: FooterPageRomanNumber
iv
ISO/FDIS 16847:2024(en) Formatted: HeaderCentered, Left
Formatted: Font: 11 pt
Formatted: Font: Bold
Formatted: Adjust space between Latin and Asian text,
Introduction
Adjust space between Asian text and numbers
With use, the surface of napped fabrics changes significantly. This change in appearance, known as matting, is
more or less severe and is related to the fibre, fabric or finishing characteristics.
Based on the structure of other ISO standards dealing with the change in appearance after cleansing, this
document has been elaborated to solve this situation.
Formatted: Font: 10 pt
Formatted: FooterCentered, Left, Space Before: 0 pt, Tab
stops: Not at 17.2 cm
Formatted: Font: 10 pt
Formatted: Font: 10 pt
Formatted: Font: 11 pt
Formatted: FooterPageRomanNumber, Left, Space After: 0
pt, Tab stops: Not at 17.2 cm
© ISO 2024 – All rights reserved
v
FINAL DRAFT International Standard ISO/FDIS 16847:2024(en)
Formatted: Left
Textiles — Test method for assessing the matting appearance of
napped fabrics after cleansing
1 Scope
This document specifies a method for assessing the matting appearance of the napped fabrics (fleece fabrics)
tested, after one or several cleansing treatments.
This method has been developed for use primarily with Type B domestic washing machines, as defined in
ISO 6330, in the cleansing process. However, it is possible to use it with Type A machines, as defined in Formatted: Default Paragraph Font
ISO 6330. This test method can be used for judging matting appearance after other cleansing processes.
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
2 Normative references
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
The following documents are referred to in the text in such a way that some or all of their content constitutes
Formatted: Adjust space between Latin and Asian text,
requirements of this document. For dated references, only the edition cited applies. For undated references,
Adjust space between Asian text and numbers, Tab stops: Not
the latest edition of the referenced document (including any amendments) applies.
at 0.7 cm + 1.4 cm + 2.1 cm + 2.8 cm + 3.5 cm + 4.2
cm + 4.9 cm + 5.6 cm + 6.3 cm + 7 cm
ISO 105--A03, Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
ISO 139, Textiles — Standard atmospheres for conditioning and testing
Formatted: Default Paragraph Font, Font: Italic
ISO 3175 (all parts), Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
ISO 6330, Textiles — Domestic washing and drying procedures for textile testing
Formatted: Default Paragraph Font, Font: Italic
Formatted: Default Paragraph Font
ISO 15797, Textiles — Industrial washing and finishing procedures for testing of workwear
Formatted: Default Paragraph Font
3 Terms and definitions Formatted: Default Paragraph Font
Formatted: Default Paragraph Font, Font: Italic
For the purposes of this document, the following terms and definitions apply.
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
Formatted: Default Paragraph Font, Font: Italic
Formatted: Default Paragraph Font
— — ISO Online browsing platform: available at
https://www.iso.org/obp/ui/https://www.iso.org/obp/ui/
Formatted: Default Paragraph Font
Formatted: Default Paragraph Font, Font: Italic
— — IEC Electropedia: available at https://www.electropedia.org/https://www.electropedia.org/
Formatted: Adjust space between Latin and Asian text,
Adjust space between Asian text and numbers
3.1 3.1
Formatted: Adjust space between Latin and Asian text,
napped fabric
Adjust space between Asian text and numbers, Tab stops: Not
fabric with raised surface of fibres on one or both sides of it
at 0.7 cm + 1.4 cm + 2.1 cm + 2.8 cm + 3.5 cm + 4.2
cm + 4.9 cm + 5.6 cm + 6.3 cm + 7 cm
Note 1 to entry: Raised fibres are often referred to as “nap”.
Formatted: TermNum2, Adjust space between Latin and
Asian text, Adjust space between Asian text and numbers
EXAMPLE Fleece fabric, fake fur, velvet, suede, flannel.
Formatted: Example, Adjust space between Latin and Asian
text, Adjust space between Asian text and numbers, Tab
stops: Not at 0.7 cm + 1.4 cm + 2.1 cm + 2.8 cm + 3.5
3.2
cm + 4.2 cm + 4.9 cm + 5.6 cm + 6.3 cm + 7 cm
Note 1 to entry: Raised fibres are often referred to as “nap”.
...
PROJET FINAL
Norme
internationale
ISO/FDIS 16847
ISO/TC 38/SC 2
Textiles — Méthode d'essai
Secrétariat: SAC
pour l'évaluation de l'aspect du
Début de vote:
moutonnement des étoffes grattées
2024-12-11
après nettoyage
Vote clos le:
2025-02-05
Textiles — Test method for assessing the matting appearance of
napped fabrics after cleansing
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
NORMES POUVANT
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
Numéro de référence
ISO/FDIS 16847:2024(fr) © ISO 2024
PROJET FINAL
ISO/FDIS 16847:2024(fr)
Norme
internationale
ISO/FDIS 16847
ISO/TC 38/SC 2
Textiles — Méthode d'essai
Secrétariat: SAC
pour l'évaluation de l'aspect du
Début de vote:
moutonnement des étoffes grattées
2024-12-11
après nettoyage
Vote clos le:
2025-02-05
Textiles — Test method for assessing the matting appearance of
napped fabrics after cleansing
LES DESTINATAIRES DU PRÉSENT PROJET SONT
INVITÉS À PRÉSENTER, AVEC LEURS OBSERVATIONS,
NOTIFICATION DES DROITS DE PROPRIÉTÉ DONT ILS
AURAIENT ÉVENTUELLEMENT CONNAISSANCE ET À
FOURNIR UNE DOCUMENTATION EXPLICATIVE.
DOCUMENT PROTÉGÉ PAR COPYRIGHT
OUTRE LE FAIT D’ÊTRE EXAMINÉS POUR
ÉTABLIR S’ILS SONT ACCEPTABLES À DES FINS
© ISO 2024 INDUSTRIELLES, TECHNOLOGIQUES ET COM-MERCIALES,
AINSI QUE DU POINT DE VUE DES UTILISATEURS, LES
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
PROJETS DE NORMES
INTERNATIONALES DOIVENT PARFOIS ÊTRE CONSIDÉRÉS
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
DU POINT DE VUE DE LEUR POSSI BILITÉ DE DEVENIR DES
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
NORMES POUVANT
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
SERVIR DE RÉFÉRENCE DANS LA RÉGLEMENTATION
NATIONALE.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse Numéro de référence
ISO/FDIS 16847:2024(fr) © ISO 2024
ii
ISO/FDIS 16847:2024(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Principe. 2
5 Appareillage . 2
6 Éprouvettes. 3
7 Mode opératoire . 3
8 Expression des résultats . 4
9 Rapport d’essai . 4
iii
ISO/FDIS 16847:2024(fr)
Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes nationaux
de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est en général
confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude a le droit de faire
partie du comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l’ISO participent également aux travaux. L’ISO collabore étroitement avec
la Commission électrotechnique internationale (IEC) en ce qui concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a
été rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir
www.iso.org/directives).
L’ISO attire l’attention sur le fait que la mise en application du présent document peut entraîner l’utilisation
d’un ou de plusieurs brevets. L’ISO ne prend pas position quant à la preuve, à la validité et à l’applicabilité de
tout droit de brevet revendiqué à cet égard. À la date de publication du présent document, l’ISO n’avait pas
reçu notification qu’un ou plusieurs brevets pouvaient être nécessaires à sa mise en application. Toutefois,
il y a lieu d’avertir les responsables de la mise en application du présent document que des informations
plus récentes sont susceptibles de figurer dans la base de données de brevets, disponible à l’adresse
www.iso.org/brevets. L’ISO ne saurait être tenue pour responsable de ne pas avoir identifié tout ou partie de
tels droits de brevet.
Les appellations commerciales éventuellement mentionnées dans le présent document sont données pour
information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l’ISO liés à l’évaluation de la conformité, ou pour toute information au sujet de l’adhésion de
l’ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles techniques au
commerce (OTC), voir le lien suivant: www.iso.org/avant-propos.
Le présent document a été élaboré par le comité technique ISO/TC 38, Textiles, sous-comité SC 2, Méthodes
d’entretien, de finition et de résistance à l’eau.
Cette seconde édition annule et remplace la première édition (ISO 16847:2016), qui a fait l’objet d’une
révision technique.
Les principales modifications sont les suivantes:
— la définition d’«étoffe grattée» (3.1) a été ajoutée (et l’ancien 3.1 a été renuméroté en 3.2);
— un nouveau paragraphe 7.12 a été ajouté pour introduire la possibilité d’utiliser des étalons de classement
photographiques;
— à l’Article 9, le rapport d’essai a été mis à jour, avec notamment l’introduction de la possibilité d’utiliser
des étalons de classement photographiques en e) et h).
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes se
trouve à l’adresse www.iso.org/members.html.
iv
ISO/FDIS 16847:2024(fr)
Introduction
À mesure que les étoffes grattées sont utilisées, leur surface se modifie de manière significative. Ce
changement d’aspect, connu sous le nom de «moutonnement», est plus ou moins marqué et il est fonction des
caractéristiques de la fibre, de l’étoffe ou de la finition.
Le présent document a été élaboré afin de remédier à cette situation et s’appuie sur la structure des autres
normes ISO traitant du changement d’aspect des étoffes après nettoyage.
v
PROJET FINAL Norme internationale ISO/FDIS 16847:2024(fr)
Textiles — Méthode d'essai pour l'évaluation de l'aspect du
moutonnement des étoffes grattées après nettoyage
1 Domaine d’application
Le présent document spécifie une méthode permettant d’évaluer l’aspect du moutonnement des étoffes
grattées (molleton) soumises à l’essai, après un ou plusieur
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.