ISO/IEC 9506-2:1990/Amd 1:1993

Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification — Amendment 1: Data exchange

Systèmes d'automatisation industrielle — Spécification de messagerie industrielle — Partie 2: Spécification de protocole — Amendement 1: Échange de données

General Information

• Status: Withdrawn
• Publication Date: 23-Jun-1993
• Withdrawal Date: 23-Jun-1993
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: ISO/TC 184/SC 5 - Interoperability, integration, and architectures for enterprise systems and automation applications
• Drafting Committee: ISO/TC 184/SC 5 - Interoperability, integration, and architectures for enterprise systems and automation applications
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 31-Aug-2000

Relations

• Revised: ISO 9506-2:2000 - Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification
• Effective Date: 15-Apr-2008
• Amends: ISO/IEC 9506-2:1990 - Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification
• Effective Date: 06-Jun-2022
• Child: ISO/IEC 9506-2:1990 - Industrial automation systems — Manufacturing Message Specification — Part 2: Protocol specification
• Effective Date: 15-Apr-2008

Standards Content (Sample)

EO/IEC
INTERNATIONAL
9506-2
STANDARD
First edition
1990-10-15
AMENDMENT 1
1993-07-O 1
Industrial automation systems - Manufacturing
Message Specification -
Part 2:
Protocol specification
AMENDMENT 1: Data exchange
Systemes d’automatisation industrielle - Sp&ification de messagerie
industrielle -
Partie 2: Spkification du protocole
AMENDEMENT I: khange de donn&es
Reference number
ISO/IEC 9506-2:1990/Amd.l:1993(E)

---------------------- Page: 1 ----------------------
ISO/IEC 9506-2: 1990/Amd. 1:1993(E)
Foreword
IS0 (the international Organization for Standardization) is a worldwide federation
of national standards bodies (IS0 member bodies). The work of preparing inter-
national Standards is normally carried out through IS0 technical committees.
Each member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. international
organizations, governmental and non-governmental, in liaison with ISO, also
take part in the work. IS0 collaborates closely with the international Electro-
technical Commission (IEC) on all matters of electrotechnical standardization.
Draft international Standards adopted by the technical committees are circulated
to the member bodies for voting. Publication as an international Standard
requires approval by at least 75 % of the member bodies casting a vote.
Amendment 1 to international Standard iSO/IEC 9506-2:1990 was prepared by
Technical Committee iSO/TC 184, industrial automation systems, Sub-
Committee SC 5, System integration and communication.
ISO/IEC 9506 consists of the following parts, under the general title industrial
Manufacturing Message Specification :
automat/on systems -
- Part 7: Service definition
- Part 2: Protocol specification
0 lSO/IEC 1993
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm,
without permission in writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
ISO/IEC 9506,2:1990/Amd.l:1993(E)
Industrial automation systems - Manufacturing Message
Specification -
Part 2:
Protocol specification
AMENDMENT 1: Data exchange
Page 23
Subclause 7.5.2
Change
“additionalService [78] AdditionalService-Request”
“additionalService [78] AdditionalService-Request,”
insert the following after ‘I-- choice [79] is reserved”:
GetDataExchangeAttributes-Request,
“getDataExchangeAttributes [80]
--
Shall not appear in minor version 1
1811 IMPLICIT ExchangeData-Request
exchangeData
--
Shall not appear in minor version 1”
Page 24
Subclause 7.5.2
Change
[71] IMPLICIT CS-GetCapabilityList-Request”
“getCapabiIityList
to
(711 IMPLICIT CS-GetCapabiIityList-Request,
“getCapabiIityList
IMPLICIT CS-GetDataExchangeAttributes-Request,
getDataExchangeAttributes [80]
-- Shall not appear in minor version 1
exchangeData [81] IMPLICIT CS-ExchangeData-Request
-- Shall not appear in minor version 1”

---------------------- Page: 3 ----------------------
ISOjlEC 9506~2:1990/Amd.l:1993(E)
Page 27
Subclause 7.5.4
Change
“additionalService [78) Additionalservice-Response”
“additionalservice (781 AdditionalService-Response,”
Insert the following after ‘I-- choice [79] is reserved”:
‘IgetDataExchangeAttributes 1801 IMPLICIT GetDataExchangeAttributes-Response,
-- Shall not appear in minor version 1
exchangeData [81] IMPLICIT ExchangeData-Response
-- Shall not appear in minor version 1”
Page 28
Subclause 7.5.4
‘“getCapabiIityList [71] IMPLICIT CS-GetCapabiIityList-Response”
“getCapabiIityList [71] IMPLICIT CS-GetCapabiIityList-Response,”
getDataExchangeAttributes [80] IMPLICIT CS-GetDataExchangeAttributes-Response,
-- Shall not appear in minor version 1
exchangeData [81] IMPLICIT CS-ExchangeData-Response
-- Shall not appear in minor version I”
Page 36
Subclause 8.2
Change
“cancel (84)”
“cancel
(84)
getDataExchangeAttributes (85): -- Shall not appear in minor version ‘I
-- Shall not appear in minor version I”
exchangeData (86) I
Page 41
Subclause 9.4
Change
II
“operatorstation
(11)
to
“operatorstation
(11) I
...