iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/FDIS 11999-5

(Main)

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets

Équipement de protection individuelle pour pompiers — Méthodes d'essai et exigences pour les équipements de protection individuelle utilisés par les pompiers qui risquent d'être exposés à des niveaux élevés de chaleur et/ou de flamme lorsqu'ils combattent des incendies dans des structures — Partie 5: Casques

General Information

Status
Not Published
ICS
13.340.20 - Head protective equipment
Technical Committee
ISO/TC 94/SC 14 - Firefighters' personal equipment
Drafting Committee
ISO/TC 94/SC 14 - Firefighters' personal equipment
Current Stage
5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
Start Date
07-May-2024
Completion Date
07-May-2024
Ref Project

Relations

Revises
ISO 11999-5:2015 - PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets
Effective Date
06-Jun-2022

Buy Standard

ISO/FDIS 11999-5 - PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets Released:23. 04. 2024ISO/FDIS 11999-5 - PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets Released:23. 04. 2024
PreviousNext
Draft
ISO/FDIS 11999-5 - PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets Released:23. 04. 2024
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ISO/FDIS 11999-5 - PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets Released:23. 04. 2024REDLINE ISO/FDIS 11999-5 - PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets Released:23. 04. 2024
PreviousNext
Draft
REDLINE ISO/FDIS 11999-5 - PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 5: Helmets Released:23. 04. 2024
English language
25 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

FINAL DRAFT
International
Standard
ISO/FDIS 11999-5
ISO/TC 94/SC 14
PPE for firefighters — Test methods
Secretariat: SA
and requirements for PPE used
Voting begins on:
by firefighters who are at risk of
2024-05-07
exposure to high levels of heat
Voting terminates on:
and/or flame while fighting fires
2024-07-02
occurring in structures —
Part 5:
Helmets
Équipement de protection personnelle pour pompiers —
Méthodes d'essai et exigences pour les équipements de protection
personnelle utilisés par les pompiers qui sont à risque d'une
exposition à des niveaux élevés de chaleur et/ou de flamme quand
la lutte contre les incendies survient dans les structures —
Partie 5: Casques
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/FDIS 11999-5:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
FINAL DRAFT
ISO/FDIS 11999-5:2024(en)
International
Standard
ISO/FDIS 11999-5
ISO/TC 94/SC 14
PPE for firefighters — Test methods
Secretariat: SA
and requirements for PPE used
Voting begins on:
by firefighters who are at risk of
exposure to high levels of heat
Voting terminates on:
and/or flame while fighting fires
occurring in structures —
Part 5:
Helmets
Équipement de protection personnelle pour pompiers —
Méthodes d'essai et exigences pour les équipements de protection
personnelle utilisés par les pompiers qui sont à risque d'une
exposition à des niveaux élevés de chaleur et/ou de flamme quand
la lutte contre les incendies survient dans les structures —
Partie 5: Casques
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
COPYRIGHT PROTECTED DOCUMENT
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
© ISO 2024
IN ADDITION TO THEIR EVALUATION AS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
or ISO’s member body in the country of the requester.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/FDIS 11999-5:2024(en) © ISO 2024

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 11999-5:2024(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Helmet requirements . 2
4.1 General .2
4.1.1 Fit .
...

Style Definition
...
Style Definition
...
Style Definition
...
ISO/FDIS 11999-5:2024(en)
Style Definition
...
ISO /TC 94/SC 14/WG 2
Style Definition
...
Style Definition
Secretariat: SA .
Style Definition
...
Date: 2024-04-03xx
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
PPE for firefighters — Test methods and requirements for PPE used
...
Style Definition
by firefighters who are at risk of exposure to high levels of heat .
Style Definition
and/or flame while fighting fires occurring in structures — Part 5: .
Style Definition
Helmets .
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Part 5:
Style Definition
...
Helmets
Style Definition
...
Style Definition
...
Équipement de protection personnelle pour pompiers — Méthodes d'essai et exigences pour les équipements de
Style Definition
protection personnelle utilisés par les pompiers qui sont à risque d'une exposition à des niveaux élevés de .
chaleur et/ou de flamme quand la lutte contre les incendies survient dans les structures —
Style Definition
...
Style Definition
...
Partie 5: Casques
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
FDIS stage
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
Style Definition
...
St l D fi iti

---------------------- Page: 1 ----------------------
ISO/DISFDIS 11999-5:2023(E2024(en) Formatted: Font: 11 pt, Bold
Formatted: Font: 11 pt, Bold
Formatted: Font: 11 pt, Bold
© ISO 2024
Formatted: Font: Bold
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication Formatted: HeaderCentered
may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying,
Formatted: French (France)
or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO
Formatted: Right: 1.5 cm, Bottom: 1 cm, Gutter: 0 cm,
at the address below or ISO’s member body in the country of the requester.
Header distance from edge: 1.27 cm, Footer distance
from edge: 0.5 cm
ISO copyright office
CP 401 • Ch. de Blandonnet 8
Formatted: Default Paragraph Font, French (France)
CH-1214 Vernier, Geneva
Formatted: French (France)
Phone: + 41 22 749 01 11
EmailE-mail: copyright@iso.org
Formatted: Default Paragraph Font, French (France)
Website: www.iso.orgwww.iso.org
Formatted: French (France)
Published in Switzerland
Formatted: French (France)
Formatted: French (France)
Formatted: French (France)
Formatted: FooterPageRomanNumber
ii © ISO 2023 – All rights reserved
© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO/FDIS 11999-5:2024(en)
Formatted: Font: 11 pt, Bold
Formatted: Font: Bold
Formatted: HeaderCentered, Left
Contents
Foreword . vi
Introduction . vii
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 3
4 Helmet requirements . 3
4.1 General. 3
4.1.1 Fit . 4
4.1.2 Protrusions and sharp edges . 4
4.1.3 Reinforcement .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 16073-9:2020(Main)
Wildland firefighting personal protective equipment — Requirements and test methods — Part 9: Firehoods

This document specifies the minimum performance requirements and methods of test for firehoods that cover the head and neck and are used for wildland firefighting. An optional requirement has been included to provide limited protection against particulate contaminants This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment. This document does not cover firehoods for structural firefighting (see ISO 11999‑9). This document only applies in situations when compatible protective clothing, helmet, and when necessary respiratory protection devices are also worn.

  • Standard
    16 pages
    English language
    sale 15% off
ISO
ISO 16073-5:2019(Main)
Wildland firefighting personal protective equipment — Requirements and test methods — Part 5: Helmets

This document specifies the minimum performance requirements and methods of test for helmets used for wildland firefighting. This document covers the general design of wildland firefighting helmets, the minimum levels of performance for the materials employed and the methods of test used. The personal protection equipment (PPE) is not intended to provide protection during fire entrapment. This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538). Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.

  • Standard
    22 pages
    English language
    sale 15% off
ISO
ISO 16073-7:2019(Main)
Wildland firefighting personal protective equipment — Requirements and test methods — Part 7: Face and eye protection

This document specifies the minimum performance requirements and methods of test for personal protective equipment (PPE) face and eye protection, for wildland firefighting. This document covers the general design of the PPE, the minimum levels of performance for the materials employed and the methods of test used. This PPE is not intended to provide protection during fire entrapment. This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538). Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.

  • Standard
    23 pages
    English language
    sale 15% off
ISO
ISO 16073-8:2019(Main)
Wildland firefighting personal protective equipment — Requirements and test methods — Part 8: Hearing

This document specifies the minimum performance requirements and methods of test for hearing protection used when wildland firefighting. This document covers the general design of the personal protective equipment (PPE), the minimum levels of performance for the materials employed and the methods of test used. The PPE is not intended to provide protection during fire entrapment. This document does not cover PPE for structural firefighting (see ISO 11999 series), for use against chemical, biological, radiological and nuclear hazards, or for use where a reflective outer surface is required (see ISO 15538). Activities in support of wildland firefighting, such as the cutting of trees and the use of a chainsaw can require additional protection to that provided in this document. Users are directed to those relevant standards for the requirements associated with such protection.

  • Standard
    4 pages
    English language
    sale 15% off
ISO
ISO 18639-5:2018(Main)
PPE ensembles for firefighters undertaking specific rescue activities — Part 5: Helmet

This document provides the principles that govern the development of incident type and/or hazard specific test methods and minimum performance requirements for helmets for firefighters while engaged in specific rescue activities. Helmets related to specific rescue activities, such as road traffic crash (RTC) and urban search and rescue (USAR), are documented in individual subclauses of this document. NOTE Further guidance can be found in ISO 18639-1. The purpose of this document is to ensure that minimum performance requirements for incident type and/or hazard specific helmets are designated. This document covers general helmet design, the minimum performance level of the materials used and the methods of test for determining this performance level. It does not cover special helmets for use in other high risk situations such as firefighting. This document does not cover protection for the torso, arms, legs and feet or protection of the hands against other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to fire ground chemicals and contaminated blood or body fluids. Selection of the appropriate system of personal protective equipment, (PPE), including helmets, is dependent on carrying out an effective risk assessment which identifies the hazard to be faced, evaluates the likelihood of those hazards and provides the means of reducing or eliminating these hazards.

  • Standard
    19 pages
    English language
    sale 15% off
ISO
ISO 12311:2023(Main)
Personal protective equipment — Test methods for sunglasses and related eyewear

This document specifies reference's test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear. Other test methods can be used if proven to be equivalent.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 12312-1:2022(Main)
Eye and face protection — Sunglasses and related eyewear — Part 1: Sunglasses for general use

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation. Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources; b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts)); c) sunglasses that have been medically prescribed for attenuating solar radiation; d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies; e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
ISO
ISO 12312-3:2022(Main)
Eye and face protection — Sunglasses and related eyewear — Part 3: Sunglasses for running, cycling and similar active lifestyles

This document is applicable to all nominally afocal (plano power) sunglasses for protection against environmental elements, such as solar radiation, wind, dust and rain when running, cycling and following similar active lifestyle recreational activities but not intended for competitive sporting activities where enhanced impact resistance is required. The document specifies additional material, design, performance and marking requirements. The other applicable requirements are given in ISO 12312‑1. This type of sunglass is designed to reduce secondary hazards to the wearer in an accident rather than to provide high amounts of impact protection which may be difficult in a spectacle format. This document is not applicable to: a) eyewear for protection against radiation from artificial light sources, such as those used in solaria; b) eye protectors intended for specific sports, e.g. ski goggles or other types – see ISO18527 (all parts); c) eye protectors for sports that include the use of a ball, stick, bat, racquet or other implement; d) sunglasses that have been medically prescribed for attenuating solar radiation; e) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies; f) products intended for occupational eye protection – for example, see ISO16321 (all parts).

  • Standard
    7 pages
    English language
    sale 15% off
ISO
ISO 12609-1:2021(Main)
Eye and face protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for products

This document specifies general requirements for operators' eye protectors for intense light source (ILS) equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation. This document is applicable to devices intended for patient protection during ILS procedures, except for treatment in the periorbital area. For guidance on patient eye protection during ILS procedures, see ISO/TR 22463. For guidance on the use and selection of ILS eye protectors, see ISO 12609-2. This document does not apply to: — laser protectors, for which ISO 19818-1 applies; — protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions; — protectors specifically intended for protection against only solar radiation and used in non-occupational environments for which the ISO 12312 (all parts) applies; — protectors used with tanning equipment; — protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.

  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    15 pages
    French language
    sale 15% off
ISO
ISO 19818-1:2021(Main)
Eye and face protection — Protection against laser radiation — Part 1: Requirements and test methods

This document is applicable to protectors intended to provide protection against accidental exposure to laser radiation within the wavelength range 180 nm to 1 mm. It specifies the requirements, test methods and marking. Protectors intended for adjustment work on lasers are included in the scope of this document and are marked in the same way as other protectors, but selection of appropriate eyewear for a specific application is a choice of the user. Laser protective filters used as viewing windows in laser equipment machinery or incorporated into optical instruments such as operating microscopes and loupes that may be used for deliberate viewing of laser radiation as part of their function are outside the scope of this document. Laser radiation in the wavelength range below 180 nm is absorbed in air, therefore eye and face protection should not be required. This document is applicable to devices intended for patient protection during medical laser procedures except for treatment in the periorbital area. Guidance on eye protectors for patients (including those used for periorbital treatment) is given in ISO/TR 22463.

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off