ISO/IEC/IEEE 12207:2017

Systems and software engineering — Software life cycle processes

ISO/IEC/IEEE 12207:2017 also provides processes that can be employed for defining, controlling, and improving software life cycle processes within an organization or a project. The processes, activities, and tasks of this document can also be applied during the acquisition of a system that contains software, either alone or in conjunction with ISO/IEC/IEEE 15288:2015, Systems and software engineering?System life cycle processes. In the context of this document and ISO/IEC/IEEE 15288, there is a continuum of human-made systems from those that use little or no software to those in which software is the primary interest. It is rare to encounter a complex system without software, and all software systems require physical system components (hardware) to operate, either as part of the software system-of-interest or as an enabling system or infrastructure. Thus, the choice of whether to apply this document for the software life cycle processes, or ISO/IEC/IEEE 15288:2015, Systems and software engineering?System life cycle processes, depends on the system-of-interest. Processes in both documents have the same process purpose and process outcomes, but differ in activities and tasks to perform software engineering or systems engineering, respectively.

Ingénierie des systèmes et du logiciel — Processus du cycle de vie du logiciel

General Information

• Status: Published
• Publication Date: 27-Nov-2017
• ICS: 35.080 - Software
• Technical Committee: ISO/IEC JTC 1/SC 7 - Software and systems engineering
• Drafting Committee: ISO/IEC JTC 1/SC 7/WG 7 - Life cycle management
• Current Stage: 9093 - International Standard confirmed
• Completion Date: 11-Oct-2023

Relations

• Consolidated By: ISO 13260:2010/Amd 1:2017 - Thermoplastics piping systems for non-pressure underground drainage and sewerage — Test method for resistance to combined temperature cycling and external loading — Amendment 1
• Effective Date: 06-Jun-2022
• Revises: ISO/IEC 12207:2008 - Systems and software engineering — Software life cycle processes
• Effective Date: 16-Mar-2013

Standards Content (Sample)

INTERNATIONAL ISO/IEC/
STANDARD IEEE
12207
First edition
2017-11
Systems and software engineering —
Software life cycle processes
Ingénierie des systèmes et du logiciel — Processus du cycle de vie du
logiciel
Reference number
ISO/IEC/IEEE 12207:2017(E)
©
ISO/IEC 2017
©
IEEE 2017

---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 12207:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2017, Published in Switzerland
© IEEE 2017
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO or IEEE at the address below or ISO’s member body in the
country of the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
Ch. de Blandonnet 8 • CP 401 3 Park Avenue, New York
CH-1214 Vernier, Geneva, Switzerland NY 10016-5997, USA
Tel. [phone]
Fax [phone]
[e-mail] [e-mail]
www.iso.org www.ieee.org
© ISO/IEC 2017 – All rights reserved
ii © IEEE 2017 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 12207:2017(E)
Contents Page
Foreword . vi
Introduction . vii
1 Scope . 1
1.1 Overview . 1
1.2 Purpose . 1
1.3 Field of application . 1
1.4 Limitations . 2
2 Normative references . 2
3 Terms, definitions, and abbreviated terms . 2
3.1 Terms and definitions . 2
3.2 Abbreviated terms . 11
4 Conformance . 11
4.1 Intended usage . 11
4.2 Full conformance . 12
4.2.1 Full conformance to outcomes . 12
4.2.2 Full conformance to tasks . 12
4.3 Tailored conformance . 12
5 Key concepts and application . 13
5.1 Introduction . 13
5.2 Software system concepts . 13
5.2.1 Software systems .
...