ISO 18393-1:2023

Thermal insulation products — Determination of settlement — Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling

This document specifies a test method for the determination of settlement of loose-fill insulation applied horizontally in ventilated attics. This test method measures the effects of humidity and temperature cycling.

Produits isolants thermiques — Détermination du tassement — Partie 1: Isolant en vrac pour combles ventilés après simulation de cycles de température et d’humidité

Le présent document spécifie une méthode d’essai pour déterminer le tassement d'un isolant en vrac, appliqué horizontalement dans les combles ventilés. Cette méthode d’essai mesure les effets des variations cycliques de température et d’humidité.

General Information

• Status: Published
• Publication Date: 03-Dec-2023
• ICS: 91.120.10 - Thermal insulation of buildings
• Technical Committee: ISO/TC 163/SC 1 - Test and measurement methods
• Drafting Committee: ISO/TC 163/SC 1 - Test and measurement methods
• Current Stage: 6060 - International Standard published
• Start Date: 04-Dec-2023
• Due Date: 16-Oct-2023
• Completion Date: 04-Dec-2023

Relations

• Revises: ISO 18393-1:2012 - Thermal insulation products — Determination of ageing by settlement — Part 1: Blown loose-fill insulation for ventilated attics
• Effective Date: 23-Apr-2020

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 18393-1
Second edition
2023-12
Thermal insulation products —
Determination of settlement —
Part 1:
Loose-fill insulation for ventilated
attics simulating humidity and
temperature cycling
Produits isolants thermiques — Détermination du tassement —
Partie 1: Isolant en vrac pour combles ventilés après simulation de
cycles de température et d’humidité
Reference number
ISO 18393-1:2023(E)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 18393-1:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2023 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 18393-1:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Test equipment .2
5.1 Specimen container . 2
5.2 Climate chamber . 2
6 Test specimens . 3
6.1 Preparations of test specimens . 3
6.2 Number of test specimens . 3
6.3 Conditioning of test specimens . 3
7 Test procedure .3
8 Calculations and expression of results . 4
9 Accuracy of measurement.4
10 Test report . 5
iii
© ISO 2023 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 18393-1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Eac
...

NORME ISO
INTERNATIONALE 18393-1
Deuxième édition
2023-12
Produits isolants thermiques —
Détermination du tassement —
Partie 1:
Isolant en vrac pour combles ventilés
après simulation de cycles de
température et d’humidité
Thermal insulation products — Determination of settlement —
Part 1: Loose-fill insulation for ventilated attics simulating humidity
and temperature cycling
Numéro de référence
ISO 18393-1:2023(F)
© ISO 2023

---------------------- Page: 1 ----------------------
ISO 18393-1:2023(F)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2023
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: [phone]
E-mail: [e-mail]
Web: www.iso.org
Publié en Suisse
ii
  © ISO 2023 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 18393-1:2023(F)
Sommaire Page
Avant-propos .iv
1 Domaine d'application .1
2 Références normatives .1
3 Termes et définitions . 1
4 Principe. 2
5 Appareillage d'essai.2
5.1 Conteneur éprouvette . 2
5.2 Enceinte climatique . 3
6 Éprouvettes. 3
6.1 Préparation des éprouvettes . 3
6.2 Nombre d’éprouvettes . 3
6.3 Conditionnement des éprouvettes . 3
7 Mode opératoire d'essai . 3
8 Calculs et expression des résultats .4
9 Exactitude de mesure .4
10 Rapport d’essai . 5
iii
© ISO 2023 – Tous droits réservés

---------------------- Page: 3 ----------------------
ISO 18393-1:2023(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de
...

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 18393-1
ISO/TC 163/SC 1
Thermal insulation products —
Secretariat: DIN
Determination of settlement —
Voting begins on:
2023-08-22
Part 1:
Voting terminates on:
Loose-fill insulation for ventilated
2023-10-17
attics simulating humidity and
temperature cycling
Produits isolants thermiques — Détermination du tassement —
Partie 1: Isolant en vrac pour combles ventilés, cyclage en
température et humidité
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 18393-1:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 1 ----------------------
ISO/FDIS 18393-1:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 18393-1
ISO/TC 163/SC 1
Thermal insulation products —
Secretariat: DIN
Determination of settlement —
Voting begins on:
Part 1:
Voting terminates on:
Loose-fill insulation for ventilated
attics simulating humidity and
temperature cycling
Produits isolants thermiques — Détermination du tassement —
Partie 1: Isolant en vrac pour combles ventilés, cyclage en
température et humidité
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 18393-1:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 2 ----------------------
ISO/FDIS 18393-1:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Test equipment .2
5.1 Specimen container . 2
5.2 Climate chamber . 2
6 Test specimens . 3
6.1 Preparations of test specimens .
...

ISO/FDIS 18393-1
ISO/TC 163/SC 1
ISO 18393-1
Secretariat: DIN
Date: 2023-0508-08
Thermal insulation products — Determination of settlement — —
Part 1: loose
Loose-fill insulation for ventilated attics simulating humidity and
temperature cycling
Produits isolants thermiques — Détermination du tassement— Partie 1: Isolant en vrac pour combles
ventilés, cyclage en température et humidité —
Document type:  Error! Reference source not found.
Document subtype:  Error! Reference source not found.
Document stage: (40) Enquiry
Document language:  Error! Reference source not found.

---------------------- Page: 1 ----------------------
Copyright notice
ThisPartie 1: Isolant en vrac pour combles ventilés, cyclage en température et humidité
FDIS stage
Document type:  Error! Reference source not found.
Document subtype:  Error! Reference source not found.
Document stage: (40) Enquiry
Document language:  Error! Reference source not found.

---------------------- Page: 2 ----------------------
ISO/FDIS 18393-1:2023(E)
© ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted under
2023
All rights reserved. Unless otherwise specified, or required in the applicable lawscontext of the user's country,
neither its implementation, no part of this ISO draft nor any extract from itpublication may be reproduced, stored
in a retrieval system or transmitted or utilized otherwise in any form or by any means, electronic, or mechanical,
including photocopying, recording or otherwiseor posting on the internet or an intranet, without prior written
permission being secured.
Requests for permission to reproduce should be addressed to . Permission can be requested from either ISO at the
address below or ISO'sISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CP 401 • Ch. de Blandonnet 8
CH-12111214 Vernier, Geneva 20
Tel.Phone: + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail: [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
Website: www.iso.org
Published in Switzerland
© ISO 2023 – All rights reserved iii
© ISO 2023 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/FDIS 18393-1:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documentsdocument should be noted. This document was drafted in accordance
with the editorial rules of the ISO/IEC Directives, Part 2 (see
www.iso.org/directiveswww.iso.org/directives).
Attention is drawnISO draws attention to the possibility that some of the elementsimplementation of this
document may beinvolve the subjectuse of (a) patent(s). ISO takes no position concerning the evidence,
validity or applicability of any claimed patent rights. in respect thereof. As of the date of publication of
this document, ISO had not received notice of (a) patent(s) which may be required to implement this
document. However, implementers are cautioned that this may not represent the latest information,
which may be obtained from the patent database available at www.iso.org/patents. ISO shall not be held
responsible for identifying any or all such patent rights. Details of any patent rights identified during the
development of the document will be in the Introduction and/or on the ISO list of patent declarations
received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the World
Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
.
www.iso.org/iso/foreword.htmlwww.iso.org/iso/foreword.html
This document was prepared by Technical Committee ISO/TC 163, Thermal performance and energy use
in the built environment, Subcommittee SC 1, Test and measurement methods, in collaboration with the
European Committee for Sta
...