ISO/IEC 14443-4:2008/Amd 3:2013
(Amendment)Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol — Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC
Identification cards — Contactless integrated circuit cards — Proximity cards — Part 4: Transmission protocol — Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc from PCD to PICC
Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact — Cartes de proximité — Partie 4: Protocole de transmission — Amendement 3: Débits binaires de 3fc/4, fc, 3fc/2 et 2fc de PCD vers PICC
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 14443-4
Second edition
2008-07-15
AMENDMENT 3
2013-10-01
Identification cards — Contactless
integrated circuit cards — Proximity
cards
Part 4:
Transmission protocol
AMENDMENT 3: Bit rates of 3fc/4, fc, 3fc/2
and 2fc from PCD to PICC
Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact —
Cartes de proximité
Partie 4: Protocole de transmission
AMENDEMENT 3: Débits binaires de 3fc/4, fc, 3fc/2 et 2fc de PCD vers
PICC
Reference number
ISO/IEC 14443-4:2008/Amd.3:2013(E)
©
ISO/IEC 2013
---------------------- Page: 1 ----------------------
ISO/IEC 14443-4:2008/Amd.3:2013(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.
Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2013 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 14443-4:2008/Amd.3:2013(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 3 to ISO/IEC 14443-4:2008 was prepared by Joint Technical Committee ISO/IEC JTC 1,
Information technology, Subcommittee SC 17, Cards and pers
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.