ISO/IEC/IEEE 8802-1CB:2019
(Main)Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1CB: Frame replication and elimination for reliability
Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 1CB: Frame replication and elimination for reliability
This document specifies procedures, managed objects, and protocols for bridges and end systems that provide identification and replication of packets for redundant transmission, identification of duplicate packets, and elimination of duplicate packets. It is not concerned with the creation of the multiple paths over which the duplicates are transmitted.
Technologies de l'information — Télécommunications et échange d'information entre systèmes — Réseaux locaux et métropolitains — Exigences spécifiques — Partie 1CB: Duplication de trame et son élimination pour la fiabilité
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC/
STANDARD IEEE
8802-1CB
First edition
2019-02
Information technology —
Telecommunications and information
exchange between systems — Local
and metropolitan area networks —
Specific requirements —
Part 1CB:
Frame replicaton and elimination for
reliability
Technologies de l'information — Télécommunications et échange
d'information entre systèmes — Réseaux locaux et métropolitains —
Exigences spécifiques —
Partie 1CB: Duplication de trame et son élimination pour la fiabilité
Reference number
ISO/IEC/IEEE 8802-1CB:2019(E)
©
IEEE 2017
---------------------- Page: 1 ----------------------
ISO/IEC/IEEE 8802-1CB:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© IEEE 2017
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO or IEEE at
the respective address below or ISO’s member body in the country of the requester.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc
CP 401 • Ch. de Blandonnet 8 3 Park Avenue, New York
CH-1214 Vernier, Geneva NY 10016-5997, USA
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org Email: stds.ipr@ieee.org
Website: www.iso.org Website: www.ieee.org
Published in Switzerland
© IEEE 2017 – All rights reserved
ii
---------------------- Page: 2 ----------------------
ISO/IEC/IEEE 8802-1CB:2019(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non‐governmental, in liaison with ISO and IEC, also
take part in the work. In the field of information technology, ISO and IEC have established a joint
technical committee, ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed
for the different types of ISO documents should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards
Coordinating Committees of the IEEE Standards Association (IEEE‐SA) Standards Board. The
IEEE develops its standards through a consensus development process, approved by the American
National Standards Institute, which brings together volunteers representing varied viewpoints and
interests to achieve the final product. Volunteers are not necessarily members of the Institute
and serve without compensation. While the IEEE administers the process and establishes rules to
promote fairness in the consensus development process, the IEEE does not independently
evaluate, test, or verify the accuracy of any of the information contained in its standards.
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all
such patent rights. Details of any patent rights identified during the development of the
document will be in the Introduction and/or on the ISO list of patent declarations received (see
www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does
not constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT),
see www.iso.org/iso/foreword.html.
ISO/IEC/IEEE 8802‐1CB was prepared by the LAN/MAN of the IEEE Computer Society (as IEEE Std
802.1CB‐2017) and drafted in accordance with its editorial rules. It was adopted, under the “fast‐
track procedure” defined in the Partner Standards Development Organization cooperation
agreement between ISO and IEEE, by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC6, Telecommunications and information exchange between systems.
A list of all parts in the ISO/IEC/IEEE 8802 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards
body. A complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2017 – All ri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.