Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 5

Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Signaux de sécurité enregistrés — Amendement 5

General Information

Status
Withdrawn
Publication Date
05-Feb-2014
Withdrawal Date
05-Feb-2014
Current Stage
9599 - Withdrawal of International Standard
Completion Date
30-Jul-2019
Ref Project

Relations

Buy Standard

Standard
ISO 7010:2011/Amd 5:2014
English language
12 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7010:2011/Amd 5:2014
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 7010:2011/Amd 5:2014
French language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 7010
Второе издание
2011-06-01
ИЗМЕНЕНИЕ 5
2014-02-15


Символы графические. Цвета и знаки
безопасности. Зарегистрированные
знаки безопасности
ИЗМЕНЕНИЕ 5
Graphic symbols – Safety colours and safety signs – Registered
safety signs
AMENDMENT 5


Ответственность за подготовку русской версии несѐт GOST R
(Российская Федерация) в соответствии со статьѐй 18.1 Устава
ISO

Ссылочный номер
ISO 7010:2011/Amd.5:2014(R)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 7010:2011/Amd.5:2014(R)


ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ


©  ISO 2014
Все права сохраняются. Если не задано иначе, никакую часть настоящей публикации нельзя копировать или использовать в
какой-либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без
предварительного письменного согласия офиса ISO по адресу, указанному ниже, или членов ISO в стране регистрации
пребывания.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии

ii © ISO 2014 – Все права сохраняются

---------------------- Page: 2 ----------------------
ISO 7010:2011/Amd.5:2014(R)
Предисловие
Международная организация по стандартизации (ISO) является всемирной федерацией национальных
организаций по стандартизации (комитетов-членов ISO). Разработка международных стандартов
обычно осуществляется техническими комитетами ISO. Каждый комитет-член, заинтересованный в
деятельности, для которой был создан технический комитет, имеет право быть представленным в этом
комитете. Международные правительственные и неправительственные организации, имеющие связи с
ISO, также принимают участие в работах. Что касается стандартизации в области электротехники, то
ISO работает в тесном сотрудничестве с Международной электротехнической комиссией (IEC).
Методы, использованные для разработки этого документа и предназначенные для его дальнейшего
поддержания, изложены в Директивах ISO.IEC, Часть 1. В частности, следует обращать внимание на
то, что разные критерии одобрения необходимы для разных типов документов ISO. Проект настоящего
документа был разработан в соответствии с редакционными правилами Директив ISO/IEC, Часть 2 (см.
www.iso.org/directives).
Следует иметь в виду, что некоторые элементы настоящего международного стандарта могут быть
объектом патентных прав. Международная организация по стандартизации не может нести
ответственность за идентификацию какого-либо одного или всех патентных прав. Подробности любых
патентных прав, выявленных во время разработки определенного документа, будут указаны в разделе
Введение и/или в списке ISO, содержащем полученные патентные заявления (см. www.iso.org/patents).
Любая торговая марка, использованная в этом документе, дана для удобства пользователей и не
является его поддержкой
Для объяснения смысла специфических терминов и выражений ISO, имеющих отношение к оценке
соответствия, а также информацию о приверженности ISO принципам ВТО в технических барьерах
торговле (TBT-Technical Barriers to Trade) смотрите следующем унифицированном указателе
информационных ресурсов (URL): Предисловие – Дополнительная информация.
За подготовку настоящего документа Технический комитет ISO/TC 145, Графические символы,
Подкомитет SC 2, Идентификация безопасности, знаки, формы, символы и цвета.

© ISO 2014 – Все права сохраняются iii

---------------------- Page: 3 ----------------------
ISO 7010:2011/Amd.5:2014(R)
Символы графические. Цвета и знаки безопасности.
Зарегистрированные знаки безопасности
ИЗМЕНЕНИЕ 5
ВАЖНОЕ ПРИМЕЧАНИЕ — Цвета, представленные в электронном файле настоящего документа,
не могут быть видимы на экране или распечатаны в качестве истинного представления. Хотя
копии настоящего документа напечатаны в ISO с таким расчетом, чтобы соответствовать (с
допустимым отклонением, если судить невооруженным взглядом) требованиям ISO 3864-4, не
предполагается использовать эти печатные копии для совпадения по цвету. Вместо этого
следует обращаться к ISO 3864-4, который предоставляет колориметрические и
фотометрические свойства и ссылки систем цветового порядка, используемые в качестве
руководящего указания.
Добавить следующие знаки обеспечения безопасности
― E035: Нож спасательного плота
― E059: Спасательная лестница
― E060: Кресло для эвакуации
― M046: Закрепите газовые баллоны
― M047:Используйте автономный дыхательный аппарат
― M048:Применяйте детектор газа
― M049:Носите защитное спортивное снаряжение при катании на роликах
― P009: Не взбираться
― P039:.Горячие работы запрещены
― W037: Предупреждение. Наезд машины с дистанционным управлением
© ISO 2014 – Все права сохраняются 1

---------------------- Page: 4 ----------------------
ISO 7010:2011/Amd.5:2014(R)
Знак безопасности E035. Нож спасательного плота
Ссылочный номер
ISO 7010-E035
Объект ссылки
Нож спасательного плота
Функция
Указать местонахождение ножа спасательного плота
Содержание изображения
Нож спасательного плота (с закругленным кончиком и
просверленными отверстиями в лезвии) между
разрезанным плетеным канатом

Потенциальная опасность
Нет возможности определить местонахождение ножа спасательного плота
Предполагаемое поведение человека, которое должно быть вызвано после осмысления значения этого
знака безопасности
Знает местонахождение ножа спасательного плота
Родственные объекты ссылок

Дополнительная информация
Данные тестирования согласно ISO 9186-1:2007 не имеются в распоряжении. Соответственно, дополнительный
текстовый знак должен быть использован для повышения понимания за исключением, когда этот знак
безопасности дополняется наставлениями, инструкциями или обучением.
2 © ISO 2014 – Все права сохраняются

---------------------- Page: 5 ----------------------
ISO 7010:2011/Amd.5:2014(R)
Знак безопасности E059. Спасательная лестница
Ссылочный номер
ISO 7010-E059
Объект ссылки
Спасательная лестница
Функция
Указать местоположение постоянной закрепленной
спасательной лестницы
Содержание изображения
Лестница (шесть горизонтальных линий между двумя
параллельными вертикальными линиями)

Потенциальная опасность
Нет возможности найти местонахождение спасательной лестницы и опознать ее как таковую
Предполагаемое поведение человека, которое должно быть вызвано после осмысления
значения этого знака безопасности
Знает местонахождение закрепленной спасательной лестницы
Родственные объекты ссылок
ISO 7010-E016, ISO 7010-E053, ISO 7010-F003
Дополнительная информация
Данные тестирования согласно ISO 9186-1:2007 не имеются в распоряжении. Соответственно, дополнительный
текстовый знак должен быть использован для повышения понимания за исключением, когда этот знак
безопасности дополняется наставлениями, инструкциями или обучением.
© ISO 2014 – Все права сохраняются 3

---------------------- Page: 6 ----------------------
ISO 7010:2011/Amd.5:2014(R)
Знак безопасности E060. Кресло для эвакуации
Ссылочный номер
ISO 7010-E060
Объект ссылки
Кресло для эвакуации
Функция
Указать местоположение эвакуационного кресла
Содержание изображения
Фигура человека, сидящего в эвакуационном
кресле, фигура человека, держащего руками это
кресло, ступенчатая лестница

Потенциальная опасность
Нет возможности определить местонахождение спасательного кресла
Предполагаемое поведение человека, которое должно быть вызвано после осмысления
значения этого знака безопасности
Знает, где находятся спасательные кресла
Родственные объекты ссылок

Дополнительная информация
Данные тестирования согласно ISO 9186-1:2007 не имеются в распоряжении. Соответственно, дополнительный
текстовый знак должен быть
...

INTERNATIONAL ISO
STANDARD 7010
Second edition
2011-06-01
AMENDMENT 5
2014-02-15
Graphical symbols — Safety colours
and safety signs — Registered safety
signs
AMENDMENT 5
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
AMENDEMENT 5
Reference number
ISO 7010:2011/Amd.5:2014(E)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 7010:2011/Amd.5:2014(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 7010:2011/Amd.5:2014(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT), see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 145, Graphical symbols, Subcommittee SC 2,
Safety identification, signs, shapes, symbols and colours.
© ISO 2014 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 7010:2011/Amd.5:2014(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs
AMENDMENT 5
IMPORTANT — The colours represented in the electronic file of this International Standard can
be neither viewed on screen nor printed as true representations. Although the copies of this
International Standard printed by ISO have been produced to correspond (with an acceptable
tolerance as judged by the naked eye) to the requirements of ISO 3864‑4, it is not intended that
these printed copies be used for colour matching. Instead consult ISO 3864‑4 which provides
colourimetric and photometric properties together with, as a guideline, references from colour
order systems.
Add the following safety signs:
— E035: Liferaft knife
— E059: Escape ladder
— E060: Evacuation chair
— M046: Secure gas cylinders
— M047: Use self-contained breathing appliance
— M048: Use gas detector
— M049: Wear protective roller sport equipment
— P009: No climbing
— P039: Hot works prohibited
— W037: Warning; Run over by remote operator controlled machine
© ISO 2014 – All rights reserved 1

---------------------- Page: 4 ----------------------
ISO 7010:2011/Amd.5:2014(E)

Safety sign E035: Liferaft knife
Reference No.
ISO 7010‑E035

Referent
Liferaft knife

Function
To indicate the location of a liferaft knife
Image content
Liferaft knife (with rounded tip and drilled-out holes
in blade) between sliced braided rope
Hazard
Not being able to locate a liferaft knife
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Being aware of the location of a liferaft knife
Related referents

Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
2 © ISO 2014 – All rights reserved

---------------------- Page: 5 ----------------------
ISO 7010:2011/Amd.5:2014(E)

Safety sign E059: Escape ladder
Reference No.
ISO 7010‑E059

Referent
Escape ladder

Function
To indicate the location of a permanently fixed escape
ladder
Image content
Ladder (six horizontal lines between two parallel
vertical lines)
Hazard
Not being able to locate a fixed escape ladder and identify it as such
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Being aware of the location of a fixed escape ladder
Related referents
ISO 7010-E016, ISO 7010-E053, ISO 7010-F003
Additional information
Test data obtained according to ISO 9186-1:2007 are not available. Consequently, a supplementary text sign
shall be used to increase comprehension except when the safety sign is supplemented by manuals, instructions
or training.
© ISO 2014 – All rights reserved 3

---------------------- Page: 6 ----------------------
ISO 7010:2011/Amd.5:2014(E)

Safety sign E060: Evacuation chair
Reference No.
ISO 7010‑E060

Referent
Evacuation chair

Function
To indicate the location of an evacuation chair
Image content
Human figure sitting in an evacuation chair, human
figure handling the evacuation chair, staircase (all
right-hand profile)
Hazard
Not being able to locate an evacuation chair
Human behaviour that is intended to be caused after understanding the safety sign’s meaning
Being aware of th
...

NORME ISO
INTERNATIONALE 7010
Deuxième édition
2011-06-01
AMENDEMENT 5
2014-02-15
Symboles graphiques — Couleurs
de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
AMENDEMENT 5
Graphical symbols — Safety colours and safety signs — Registered
safety signs
AMENDMENT 5
Numéro de référence
ISO 7010:2011/Amd.5:2014(F)
©
ISO 2014

---------------------- Page: 1 ----------------------
ISO 7010:2011/Amd.5:2014(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2014
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2014 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 7010:2011/Amd.5:2014(F)

Avant-propos
L’ISO (Organisation internationale de normalisation) est une fédération mondiale d’organismes
nationaux de normalisation (comités membres de l’ISO). L’élaboration des Normes internationales est
en général confiée aux comités techniques de l’ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l’ISO participent également aux travaux.
L’ISO collabore étroitement avec la Commission électrotechnique internationale (CEI) en ce qui concerne
la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/CEI, Partie 1. Il convient, en particulier de prendre note des différents
critères d’approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/CEI, Partie 2 (voir www.
iso.org/directives).
L’attention est appelée sur le fait que certains des éléments du présent document peuvent faire l’objet de
droits de propriété intellectuelle ou de droits analogues. L’ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant les
références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de l’élaboration
du document sont indiqués dans l’Introduction et/ou sur la liste ISO des déclarations de brevets reçues
(voir www.iso.org/brevets).
Les éventuelles appellations commerciales utilisées dans le présent document sont données pour
information à l’intention des utilisateurs et ne constituent pas une approbation ou une recommandation.
Pour une explication de la signification des termes et expressions spécifiques de l’ISO liés à l’évaluation
de la conformité, aussi bien que pour des informations au sujet de l’adhésion de l’ISO aux principes de
l’OMC concernant les obstacles techniques au commerce (OTC) voir le lien suivant: Avant-propos —
Informations supplémentaires.
Le comité chargé de l’élaboration du présent document est l’ISO/TC 145, Symboles graphiques et
pictogrammes, Sous-comité SC 2, Identification de sécurité, signaux, formes, symboles et couleurs.
© ISO 2014 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO 7010:2011/Amd.5:2014(F)
Symboles graphiques — Couleurs de sécurité et signaux de
sécurité — Signaux de sécurité enregistrés
AMENDEMENT 5
IMPORTANT — Les couleurs représentées dans le fichier électronique de la présente Norme
internationale ne peuvent être considérées comme représentation réelle ni à l’affichage à
l’écran, ni à l’impression. Bien que les copies de la présente Norme internationale imprimées
par l’ISO aient été produites pour correspondre (avec une tolérance acceptable jugée à l’œil nu)
aux exigences de l’ISO 3864-4, l’intention n’est pas d’utiliser ces copies imprimées à des fins
de comparaison de couleurs. A la place, consulter l’ISO 3864-4 qui fournit des caractéristiques
colorimétriques et photométriques ainsi que, à titre d’indication, des références à des systèmes
de classification des couleurs.
Ajouter les signaux de sécurité suivants:
E035: Couteau de radeau de survie
E059: Échelle de secours
E060: Chaise d’évacuation
M046: Sécuriser les bouteilles de gaz
M047: Utiliser l’appareil respiratoire autonome
M048: Utiliser le détecteur de gaz
M049: Porter un équipement de protection pour sports à roulettes
P009: Escalade interdite
P039: Travaux à chaud interdits
W037: Danger; Machine commandée à distance par l’opérateur
© ISO 2014 – Tous droits réservés 1

---------------------- Page: 4 ----------------------
ISO 7010:2011/Amd.5:2014(F)

Signal de sécurité E035: Couteau de radeau de survie
N° de référence
ISO 7010-E035

Référent
Couteau de radeau de survie

Fonction
Indiquer l’emplacement du couteau d’un radeau de
survie
Contenu graphique
Couteau de radeau de survie (avec pointe arrondie et
trous percés dans la lame) entre deux morceaux de
drisse
Risque
Ne pas pouvoir localiser le couteau d’un radeau de survie
Comportement escompté une fois compris le sens du signal de sécurité
Connaître l’emplacement du couteau du radeau de survie
Référents connexes

Informations complémentaires
Aucune donnée d’essai conforme à l’ISO 9186-1:2007 n’est disponible. En conséquence, un signal d’information
additionnelle doit être utilisé pour améliorer la compréhension, sauf si le signal de sécurité est accompagné de
manuels, d’instructions ou d’une formation.
2 © ISO 2014 – Tous droits réservés

---------------------- Page: 5 ----------------------
ISO 7010:2011/Amd.5:2014(F)

Signal de sécurité E059 : Échelle de secours
N° de référence
ISO 7010-E059

Référent
Échelle de secours

Fonction
Indiquer l’emplacement d’une échelle de secours fixe
Contenu graphique
Échelle (six lignes horizontales entre deux lignes verti-
cales parallèles)
Risque
Ne pas pouvoir localiser une échelle de secours fixe
Comportement escompté une fois compris le sens du signal de sécurité
Connaître l’emplacement d’une échelle de secours fixe
Référents connexes
ISO 7010-E016, ISO 7010-E053, ISO 7010-F003
Informations complémentaires
Aucune donnée d’essai conforme à l’ISO 9186-1:2007 n’est disponible. En conséquence, un signal d’information
additionnelle doit être utilisé pour améliorer la compréhension, sauf si le signal de sécurité est accompagné de
manuels, d’instructions ou d’une formation.
© ISO 2014 – Tous droits réservés 3

---------------------- Page: 6 ----------------------
ISO 7010:2011/Amd.5:2014(F)

Signal de sécurité E060 : Chaise d’évacuation
N° de référence
ISO 7010-E060

Référent
Chaise d’évacuation

Fonction
Indiquer l’emplacement d’une chaise d’évacuation
Contenu graphique
Silhouette humaine assise sur une chaise d’évacuation,
silhouette humaine manipulant la chaise, escalier
(profil droit)
Risque
Ne pas pouvoir localiser une chaise d’évacuation
Comportement escompté une fois com
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.