Information technology — Open Systems Interconnection — The Directory: Use of systems management for administration of the Directory — Part 10:

Technologies de l'information — Interconnexion de systèmes ouverts (OSI) — L'annuaire: Utilisation de la gestion-systèmes pour l'administration de l'annuaire — Partie 10:

General Information

Status
Withdrawn
Publication Date
14-Dec-1998
Withdrawal Date
14-Dec-1998
Current Stage
9599 - Withdrawal of International Standard
Completion Date
21-May-2007
Ref Project

Relations

Buy Standard

Standard
ISO/IEC 9594-10:1998 - Information technology -- Open Systems Interconnection -- The Directory: Use of systems management for administration of the Directory
English language
77 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEC 9594-10:1998 - Technologies de l'information -- Interconnexion de systemes ouverts (OSI) -- L'annuaire: Utilisation de la gestion-systemes pour l'administration de l'annuaire
French language
81 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 9594-10
First edition
1998-12-15
Information technology — Open Systems
Interconnection — The Directory: Use of
systems management for administration
of the Directory
Technologies de l'information — Interconnexion de systèmes ouverts
(OSI) — L'Annuaire: Emploi de la gestion-systèmes pour
l'administration de l'Annuaire
Reference number
ISO/IEC 9594-10:1998(E)
©
ISO/IEC 1998

---------------------- Page: 1 ----------------------
ISO/IEC 9594-10:1998(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Published by ISO in 2000
Printed in Switzerland
ii © ISO/IEC 1998 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 9594-10:1998(E)
Contents
Page
1 Scope . 1
2 Normative references. 2
2.1 Identical Recommendations | International Standards. 2
2.2 Paired Recommendations | International Standards equivalent in technical content. 2
3 Definitions . 3
3.1 OSI Reference Model definitions. 3
3.2 Management Framework definitions. 3
3.3 System Management Overview definitions. 3
3.4 Management Information Model definitions. 3
3.5 Directory Model definitions . 3
3.6 Distributed Operation definitions. 4
4 Abbreviations . 4
5 Conventions. 5
6 Directory management requirements. 5
6.1 Introduction . 5
6.2 Sources of management requirements. 6
6.2.1 Service agreement . 6
6.2.2 Operations . 6
6.2.3 Business processes . 7
6.3 Analysis of management requirements. 7
6.3.1 General requirements . 7
6.3.2 Directory user. 7
6.3.3 Directory customer. 8
6.3.4 Directory service manager. 9
6.3.5 Directory business manager . 9
6.3.6 Management of the DIT domain . 9
6.3.7 Management of a DSA. 10
7 Directory Management Model. 13
7.1 Introduction . 13
7.2 Directory Management Model components .13
7.3 Layered Directory Management Model . 14
7.4 Directory Information Model and System Management Information Model. 15
7.5 Directory Service Model . 15
7.5.1 Directory Information Service. 15
7.5.2 Directory Control Service . 16
8 Provision of management services . 16
9 Directory Management Information Model. 18
10 Directory managed objects . 19
10.1 DSA managed object. 19
10.1.1 DSA managed object definitions. 19
10.1.2 Directory service package definitions . 21
10.1.3 DSA Information Tree operational information definitions. 24
10.1.4 NHOB definitions . 24
10.1.5 HOB definitions . 25
10.1.6 Shadowing Agreement Definitions . 26
10.2 Known DSA managed objects . 27
10.2.1 Known DSA managed object definitions . 27
10.3 Known DUA managed objects. 27
10.3.1 Known DUA managed object definitions . 28
© ISO/IEC 1998 – All rights reserved iii

---------------------- Page: 3 ----------------------
ISO/IEC 9594-10:1998(E)
Page
10.4 Upper layer definitions. 28
10.4.1 Upper layer connection endpoint managed object class definitions. 28
10.5 DUA managed objects. 28
10.5.1 DUA managed object definitions . 28
10.6 Directory Service managed objects . 29
10.6.1 Directory Service managed object definitions. 29
10.6.2 Directory Customer managed object definitions . 29
10.6.3 Directory User managed object definitions. 29
10.7 Directory Management Domain managed objects . 29
Annex A – Managed object definitions . 30
A.1 Management of a DSA. 30
A.1.1 DSA managed object definitions. 30
A.1.2 Directory Service Packages Management Package definitions. 40
A.1.3 DSA Information Tree operational information definitions. 42
A.1.4 NHOB managed object definitions . 43
A.1.5 HOB managed object definitions . 45
A.1.6 Shadowing Agreement managed object definitions . 46
A.2 Management of a Known DSA . 49
A.2.1 Known DSA managed object definition . 50
A.2.2 Known DSA name binding definitions . 50
A.2.3 Known DSA package definition. 50
A.3 Management of a Known DUA. 50
A.3.1 Known DUA managed object definition. 51
A.3.2 Known DUA name binding definition . 51
A.3.3 Known DUA package definition. 51
A.4 Management of association . 51
A.4.1 Upper Layer Connection Endpoint managed object definition . 51
A.4.2 Upper Layer Connection Endpoint name binding definitions. 51
A.4.3 Upper Layer Connection Endpoint package definition . 52
A.5 Management of a DUA . 52
A.5.1 DUA managed object definition. 52
A.5.2 DUA package definition. 52
A.5.3 DUA action definitions .52
A.6 Directory Service management . 53
A.6.1 Directory Service. 53
A.6.2 Directory Customer . 54
A.6.3 Directory User . 54
A.7 DMD . 55
A.7.1 DMD managed object . 55
A.7.2 DMD package definition . 55
A.8 Definition of attributes . 55
A.9 ASN.1 notations . 71
iv © ISO/IEC 1998 – All rights reserved

---------------------- Page: 4 ----------------------
ISO/IEC 9594-10:1998(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO/IEC 9594 may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/IEC 9594-10 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information
technology, Subcommittee SC 6, Telecommunications and information exchange between systems,in
collaboration with ITU-T. The identical text is published as ITU-T Recommendation X.530.
ISO/IEC 9594 consists of the following parts, under the general title Information technology — Open Systems
Interconnection — The Directory :
� Part 1: Overview of concepts, models and services
� Part 2: Models
� Part 3: Abstract service definition
� Part 4: Procedures for distributed operation
� Part 5: Protocol specifications
� Part 6: Selected attribute types
� Part 7: Selected object classes
� Part 8: Authentication framework
� Part 9: Replication
� Part 10: Use of systems management for administration of the Directory
Annex A forms a normative part of this part of ISO/IEC 9594.
© ISO/IEC 1998 – All rights reserved v

---------------------- Page: 5 ----------------------
ISO/IEC 9594-10:1998(E)
Introduction
This Recommendation | International Standard, together with other Recommendations | International Standards, has been
produced to facilitate the interconnection of information processing systems to provide Directory services. A set of such
systems, together with the Directory information which they hold, can be viewed as an integrated whole, called the
Directory. The information held by the Directory, collectively known as the Directory Information Base (DIB), is
typically used to facilitate communication between, with or about objects such as application entities, people, terminals
and distribution lists.
The Directory plays a significant role in Open Systems Interconnection, whose aim is to allow, with a minimum of
technical agreement outside of the interconnection standards themselves, the interconnection of information processing
systems:
– from different manufacturers;
– under different managements;
– of different levels of complexity; and
– of different ages.
The purpose of Directory management is to assure that needed, accurate Directory information is available to users as
scheduled with the expected response time, integrity, security and level of consistency. Furthermore, systems
management may be accomplished with the minimum burden on processing time and memory on platforms and the
communications system.
The Directory may support open systems applications such as message handling systems, File, Transfer, Access, and
Management (FTAM) systems, and transaction processing systems. Therefore, the Directory system may be manageable
from an integrated system management platform.
Implementors should note that a defect resolution process exists and that corrections may be applied to this
Recommendation | International Standard in the form of technical corrigenda. The identical corrections will be applied to
this Recommendation | International Standard in the form of an Implementor’s Guide. A list of approved technical
corrigenda for this Recommendation | International Standard can be obtained from the Subcommittee secretariat.
Published technical corrigenda are available from your national standards organization. The Implementor’s Guide may
be obtained from the ITU Web site.
Annex A, which is an integral part of this Recommendation | International Standard, defines the managed objects used
for Directory System Agent administration.
vi © ISO/IEC 1998 – All rights reserved

---------------------- Page: 6 ----------------------
ISO/IEC 9594-10 : 1998 (E)
INTERNATIONAL STANDARD
ISO/IEC 9594-10 : 1998 (E)
ITU-T Rec. X.530 (1997 E)
ITU-T RECOMMENDATION
INFORMATION TECHNOLOGY – OPEN SYSTEMS INTERCONNECTION –
THE DIRECTORY: USE OF SYSTEMS MANAGEMENT FOR
ADMINISTRATION OF THE DIRECTORY
SECTION 1 – GENERAL
1 Scope
This specification describes the requirements for Directory management, and analyses these requirements to identify
those that may be realised by OSI Systems Management services (and protocols), those that are realised by Directory
services (and protocols), and those that are realised by local means.
Based on the requirements, this specification defines a model for Directory management that encompasses all of the
requirements.
Management of the Directory is divided into four major segments:
a) management of the DIT Domain: Management of Directory information;
b) management of the operation of a single DSA within a DMD;
c) management of the operation of a single DUA within a DMD; and
d) management of the Directory Management Domain (DMD): Integrated management of the functional
components of the Directory.
This Recommendation | International Standard covers items a), b) and c). Item d), Management of the Directory
Management Domain, is for further study.
Based on the model, this Specification describes the detailed OSI Systems Management Managed Objects used to
manage Directory System Agents (DSAs) and Directory User Agents (DUAs) within a Directory Domain, and describes
the detailed OSI Systems Management Managed Objects used to manage the interfaces to DUAs and DSAs in other
domains as shown in Figure 1.
Global X.500 Directory
DMD DMD
Management
DMD
responsiblility
T0727140-96/d01
Figure 1 – Scope of Directory management
FIGURE 1/X.530.[D01] = 3 CM
ITU-T Rec. X.530 (1997 E) 1

---------------------- Page: 7 ----------------------
ISO/IEC 9594-10 : 1998 (E)
2 Normative references
The following Recommendations and International Standards contain provisions which, through reference in this text,
constitute provisions of this Recommendation | International Standard. At the time of publication, the editions indicated
were valid. All Recommendations and Standards are subject to revision, and parties to agreements based on this
Recommendation | International Standard are encouraged to investigate the possibility of applying the most recent
edition of the Recommendations and Standards listed below. Members of IEC and ISO maintain registers of currently
valid International Standards. The Telecommunication Standardisation Bureau of the ITU maintains a list of currently
valid ITU-T Recommendations.
2.1 Identical Recommendations | International Standards
– ITU-T Recommendation X.200 (1994) | ISO/IEC 7498-1:1994, Information technology – Open Systems
Interconnection – Basic Reference Model: The Basic Model.
– ITU-T Recommendation X.500 (1997) | ISO/IEC 9594-1:1997, Information technology – Open Systems
Interconnection – The Directory: Overview of concepts, models and services.
– ITU-T Recommendation X.501 (1997) | ISO/IEC 9594-2:1997, Information technology – Open Systems
Interconnection – The Directory: Models.
– ITU-T Recommendation X.509 (1997) | ISO/IEC 9594-8:1997, Information technology – Open Systems
Interconnection – The Directory: Authentication framework.
– ITU-T Recommendation X.511 (1997) | ISO/IEC 9594-3:1997, Information technology – Open Systems
Interconnection – The Directory: Abstract service definition.
– ITU-T Recommendation X.518 (1997) | ISO/IEC 9594-4:1997, Information technology – Open Systems
Interconnection – The Directory: Procedures for distributed operation.
– ITU-T Recommendation X.519 (1997) | ISO/IEC 9594-5:1997, Information technology – Open Systems
Interconnection – The Directory: Protocol specifications.
– ITU-T Recommendation X.520 (1997) | ISO/IEC 9594-6:1997, Information technology – Open Systems
Interconnection – The Directory: Selected attribute types.
– ITU-T Recommendation X.521 (1997) | ISO/IEC 9594-7:1997, Information technology – Open Systems
Interconnection – The Directory: Selected object classes.
– ITU-T Recommendation X.525 (1997) | ISO/IEC 9594-9:1997, Information technology – Open Systems
Interconnection – The Directory: Replication.
– ITU-T Recommendation X.701 (1997) | ISO/IEC 10040:1997, Information technology – Open Systems
Interconnection – Systems management overview.
– CCITT Recommendation X.720 (1992) | ISO/IEC 10165-1:1993, Information technology – Open Systems
Interconnection – Structure of management information: Management Information Model.
– CCITT Recommendation X.721 (1992) | ISO/IEC 10165-2:1992, Information technology – Open Systems
Interconnection – Structure of management information: Definition of management information.
– CCITT Recommendation X.722 (1992) | ISO/IEC 10165-4:1992, Information technology – Open Systems
Interconnection – Structure of management information: Guidelines for the definition of managed
objects.
– ITU-T Recommendation X.723 (1993) | ISO/IEC 10165-5:1994, Information technology – Open Systems
Interconnection – Structure of management information: Generic management information.
2.2 Paired Recommendations | International Standards equivalent in technical content
– CCITT Recommendation X.700 (1992), Management framework for Open Systems Interconnection (OSI)
for CCITT applications.
ISO/IEC 7498-4:1989, Information processing systems – Open Systems Interconnection – Basic
Reference Model – Part 4: Management framework.
– CCITT Recommendation X.710 (1991), Common management information service definition for CCITT
applications.
ISO/IEC 9595:1991, Information technology – Open Systems Interconnection – Common management
information service definition.
2 ITU-T Rec. X.530 (1997 E)

---------------------- Page: 8 ----------------------
ISO/IEC 9594-10 : 1998 (E)
– CCITT Recommendation X.711 (1991), Common management information protocol specification for
CCITT applications.
ISO/IEC 9596-1:1991, Information technology – Open Systems Interconnection – Common management
information protocol – Part 1: Specification.
3 Definitions
For the purposes of this Recommendation | International Standard, the following definitions apply.
3.1 OSI Reference Model definitions
The following terms are defined in ITU-T Rec. X.200 | ISO/IEC 7498-1:
a) application-entity;
b) Application Layer;
c) application-process;
d) application protocol data unit.
3.2 Management Framework definitions
The following terms are defined in CCITT Rec. X.700 and ISO/IEC 7498-4:
a) management information base;
b) managed object.
3.3 System Management Overview definitions
The following terms are defined in ITU-T Rec. X.701 | ISO/IEC 10040:
a) agent;
b) manager;
c) notification;
d) managed object class.
3.4 Management Information Model definitions
The following terms are defined in CCITT Rec. X.720 | ISO/IEC 10165-1:
a) behaviour;
b) conditional package;
c) inheritance;
d) naming tree;
e) package;
f) subclass;
g) superclass.
3.5 Directory Model definitions
The following terms are defined in ITU-T Rec. X.501 | ISO/IEC 9594-2:
a) access control;
b) Administration Directory Management Domain;
c) alias;
d) attribute;
e) attribute type;
ITU-T Rec. X.530 (1997 E) 3

---------------------- Page: 9 ----------------------
ISO/IEC 9594-10 : 1998 (E)
f) attribute value;
g) authentication;
h) Directory Information Tree ;
i) Directory Management Domain ;
j) Directory System Agent ;
k) DSA Specific Entry;
l) Directory User Agent (DUA);
m) distinguished name;
n) entry;
o) name;
p) object (of interest);
q) Private Directory Management Domain;
r) relative distinguished name;
s) root;
t) schema;
u) security policy;
v) subordinate object;
w) superior entry;
x) superior object;
y) tree;
z) (Directory) user.
3.6 Distributed Operation definitions
The following terms are defined in ITU-T Rec. X.518 | ISO/IEC 9594-4:
a) hierarchical operational binding;
b) non-specific hierarchical operational binding.
4 Abbreviations
For the purposes of this Recommendation | International Standard, the following abbreviations apply:
ADDMD Administration Directory Management Domain
CMIP Common Management Information Protocol
DAP Directory Access Protocol
DIB Directory Information Base
DISP Directory Information Shadowing Protocol
DIT Directory Information Tree
DMD Directory Management Domain
DOP Directory Operational Binding Management Protocol
DSA Directory System Agent
DSE DSA Specific Entry
DSP Directory System Protocol
DUA Directory User Agent
HOB Hierarchical Operational Binding
MIB Management Information Base
4 ITU-T Rec. X.530 (1997 E)

---------------------- Page: 10 ----------------------
ISO/IEC 9594-10 : 1998 (E)
NHOB Non-specific Hierarchical Operational Binding
NSAP Network Service Access Point
NSSR Non-specific Subordinate Reference
OSI Open Systems Interconnection
PRDMD Private Directory Management Domain
RDN Relative Distinguished Name
TMN Telecommunications Management Network
5 Conventions
With minor exceptions, this Directory Specification has been prepared according to the "Presentation of ITU-T |
ISO/IEC common text" guidelines in the Guide for ITU-T and ISO/IEC JTC 1 Co-operation, March 1993.
The term "Directory Specification" (as in "this Directory Specification") shall be taken to mean this Recommendation |
International Standard. The term "Directory Specifications" shall be taken to mean all of the X.500-Series Recommen-
dations | ISO/IEC 9594.
This Directory Specification uses the term "1988 edition systems" to refer to systems conforming to the first (1988)
edition of the Directory Specifications, i.e. the 1988 edition of the series of CCITT X.500 Recommendations and the
ISO/IEC 9594:1990 edition. This Directory Specification uses the term "1993 edition systems" to refer to systems
conforming to the second (1993) edition of the Directory Specifications, i.e. the 1993 edition of the series of ITU-T
X.500 Recommendations and the ISO/IEC 9594:1995 edition. Systems conforming to this third edition of the Directory
Specifications are referred to as "1997 edition systems".
This Directory Specification presents ASN.1 notation and Managed Object Definitions in the bold Times Roman, 9 point
typeface. When ASN.1 types and values or Managed Object Definitions are referenced in normal text, they are
differentiated from normal text by presenting them in the bold Times Roman, 9 point typeface. Access control
permissions are presented in italicized Helvetica.
SECTION 2 – MANAGEMENT REQUIREMENTS
6 Directory management requirements
The collection and processing
...

NORME ISO/CEI
INTERNATIONALE 9594-10
Première édition
1998-12-15
Technologies de l'information —
Interconnexion de systèmes ouverts
(OSI) — L'annuaire: Utilisation de la
gestion-systèmes pour l'administration
de l'annuaire
Information technology — Open Systems Interconnection —
The Directory: Use of systems management for administration of
the Directory
Numéro de référence
ISO/CEI 9594-10:1998(F)
©
ISO/CEI 1998

---------------------- Page: 1 ----------------------
ISO/CEI 9594-10:1998(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier peut
être imprimé ou visualisé, mais ne doit pas être modifiéà moins que l'ordinateur employéà cet effet ne bénéficie d'une licence autorisant
l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées acceptent de fait la
responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute responsabilité en la
matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la créationduprésent fichier PDF sont disponibles dans la rubrique General Info du
fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir l'exploitation de
ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation, veuillez en informer le
Secrétariat central à l'adresse donnée ci-dessous.
© ISO/CEI 1998
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous quelque
forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l’ISO à
l’adresse ci-aprèsouducomité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Publiée par l'ISO en 2000
Version française parue en 2001
Imprimé en Suisse
ii © ISO/CEI 1998 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/CEI 9594-10:1998(F)
TABLE DES MATIÈRES
Page
1 Domaine d’application. 1
2 Références normatives. 2
2.1 Recommandations | Normes internationales identiques . 2
2.2 Paires de Recommandations | Normes internationales équivalentes par leur contenu technique. 2
3 Définitions . 3
3.1 Définitions du modèle de référence OSI . 3
3.2 Définitions du cadre général de gestion . 3
3.3 Définitions de l'aperçu général de la gestion-systèmes .3
3.4 Définitions du modèle d'informations de gestion. 3
3.5 Définitions du modèle d'Annuaire. 3
3.6 Définitions concernant l'exploitation répartie . 4
4 Abréviations . 4
5 Conventions. 5
6 Exigences de gestion de l'Annuaire . 5
6.1 Introduction . 6
6.2 Sources des exigences de gestion. 6
6.2.1 Contrat de service. 6
6.2.2 Opérations . 7
6.2.3 Procédés commerciaux. 7
6.3 Analyse des exigences de gestion . 7
6.3.1 Exigences générales . 7
6.3.2 Utilisateur d'Annuaire . 8
6.3.3 Client d'Annuaire. 9
6.3.4 Gestionnaire du service d'Annuaire. 9
6.3.5 Gestionnaire commercial d'Annuaire . 10
6.3.6 Gestion du domaine DIT . 10
6.3.7 Gestion d'un DSA. 10
7 Modèle de gestion d'Annuaire . 14
7.1 Introduction . 14
7.2 Composantes du modèle de gestion d'Annuaire.14
7.3 Modèle de gestion d'Annuaire en couches . 15
7.4 Modèle d'informations d'Annuaire et modèle d'informations de gestion-systèmes. 16
7.5 Modèle de service d'Annuaire . 17
7.5.1 Service d'informations d'Annuaire . 17
7.5.2 Service de contrôle d'Annuaire. 17
8 Fourniture de services de gestion . 18
9 Modèle d'informations de gestion d'Annuaire . 19
10 Objets gérés d'Annuaire. 20
10.1 Objet géré DSA . 20
10.1.1 Définitions des objets gérés DSA. 20
10.1.2 Définitions du bloc de service d'Annuaire . 23
10.1.3 Définitions des informations opérationnelles d'arbre d'informations de DSA . 26
10.1.4 Définitions NHOB. 27
10.1.5 Définitions HOB . 27
10.1.6 Définitions des accords de duplication miroir. 28
10.2 Objets gérés DSA connu . 29
10.2.1 Définitions d'objets gérés DSA connu. 29
10.3 Objets gérés DUA connu. 30
10.3.1 Définitions d'objets gérés DUA connu. 30
© ISO/CEI 1998 – Tous droits réservés iii

---------------------- Page: 3 ----------------------
ISO/CEI 9594-10:1998(F)
Page
10.4 Définitions de couches supérieures . 30
10.4.1 Définitions de classe d'objet géré extrémité de connexion de couche supérieure . 31
10.5 Objets gérés DUA . 31
10.5.1 Définitions de l'objet géré DUA. 31
10.6 Objets gérés service d'annuaire . 31
10.6.1 Définitions des objets gérés service d'annuaire . 31
10.6.2 Définitions des objets gérés clients d'Annuaire. 32
10.6.3 Définitions des objets gérés utilisateurs d'Annuaire. 32
10.7 Objets gérés domaine de gestion d'Annuaire. 32
Annexe A – Définition des objets gérés . 33
A.1 Gestion d'un DSA. 33
A.1.1 Définition des objets gérés DSA . 33
A.1.2 Définition du bloc de gestion pour les blocs de service d'Annuaire. 43
A.1.3 Définition des informations opérationnelles d'arbre d'informations DSA. 46
A.1.4 Définition des objets gérés NHOB. 47
A.1.5 Définition d'objet géré HOB . 48
A.1.6 Définition des objets gérés d'accord de duplication miroir . 50
A.2 Gestion d'un agent DSA connu . 53
A.2.1 Définition des objets gérés DSA connu . 53
A.2.2 Définition des associations de nom de DSA connu. 53
A.2.3 Définition du bloc DSA connu. 53
A.3 Gestion d'un DUA connu . 54
A.3.1 Définition d'objets gérés DUA connu . 54
A.3.2 Définition d'association de nom de DUA connu . 54
A.3.3 Définitions de bloc DUA connu. 54
A.4 Gestion d'association . 55
A.4.1 Définition d'objets gérés d'extrémité de connexion de couche supérieure . 55
A.4.2 Définitions des associations de nom d'extrémité de connexion de couche supérieure. 55
A.4.3 Définitions du bloc d'extrémité de connexion de couche supérieure . 55
A.5 Gestion d'un agent DUA . 55
A.5.1 Définition d'objets gérés DUA . 56
A.5.2 Définitions de bloc DUA. 56
A.5.3 Définitions des actions DUA. 56
A.6 Gestion du service d'Annuaire. 56
A.6.1 Service d'Annuaire . 56
A.6.2 Client d'Annuaire. 57
A.6.3 Utilisateur d'Annuaire . 58
A.7 DMD . 58
A.7.1 Objet géré DMD. 58
A.7.2 Définition de bloc DMD. 58
A.8 Définition des attributs . 59
A.9 Conventions ASN.1. 75
iv © ISO/CEI 1998 – Tous droits réservés

---------------------- Page: 4 ----------------------
ISO/CEI 9594-10:1998(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) et la CEI (Commission électrotechnique internationale)
forment le système spécialisé de la normalisation mondiale. Les organismes nationaux membres de l'ISO ou de la
CEI participent au développement de Normes internationales par l'intermédiaire des comités techniques créés par
l'organisation concernée afin de s'occuper des domaines particuliers de l'activité technique. Les comités
techniques de l'ISO et de la CEI collaborent dans des domaines d'intérêt commun. D'autres organisations
internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO et la CEI participent également
aux travaux.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI, Partie 3.
Dans le domaine des technologies de l'information, l'ISO et la CEI ont créé un comité technique mixte,
l'ISO/CEI JTC 1. Les projets de Normes internationales adoptéspar le comité technique mixte sont soumis aux
organismes nationaux pour vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au
moins des organismes nationaux votants.
L’attention est appelée sur le fait que certains des éléments delaprésente partie de l’ISO/CEI 9594 peuvent faire
l’objet de droits de propriété intellectuelle ou de droits analogues. L’ISO et la CEI ne sauraient être tenues pour
responsables de ne pas avoir identifié de tels droits de propriété et averti de leur existence.
La Norme internationale ISO/CEI 9594-10 a étéélaborée par le comité technique mixte ISO/CEI JTC 1,
Technologies de l'information, sous-comité SC 6, Téléinformatique, en collaboration avec l'UIT-T. Le texte
identique est publié en tant que Recommandation UIT-T X.530.
L'ISO/CEI 9594 comprend les parties suivantes, présentées sous le titre général Technologies de l'information —
Interconnexion de systèmes ouverts (OSI) — L'annuaire:
� Partie 1: Aperçugénéral des concepts, modèles et services
� Partie 2: Les modèles
� Partie 3: Définition du service abstrait
� Partie 4: Procédures pour le fonctionnement réparti
� Partie 5: Spécification du protocole
� Partie 6: Types d'attributs sélectionnés
� Partie 7: Classes d'objets sélectionnées
� Partie 8: Cadre d'authentification
� Partie 9: Duplication
� Partie 10: Utilisation de la gestion-systèmes pour l'administration de l'annuaire
L'annexe A constitue un élément normatif de la présente partie de l'ISO/CEI 9594.
© ISO/CEI 1998 – Tous droits réservés v

---------------------- Page: 5 ----------------------
ISO/CEI 9594-10:1998(F)
Introduction
La présente Recommandation | Norme internationale a été élaborée, ainsi que d'autres Recommandations | Normes
internationales, pour faciliter l'interconnexion des systèmes de traitement de l'information et permettre ainsi d'assurer des
services d'annuaire. L'ensemble de tous ces systèmes, avec les informations d'annuaire qu'ils contiennent, peut être
considéré comme un tout intégré, appelé Annuaire. Les informations de l'Annuaire, appelées collectivement base
d'informations d'Annuaire (DIB), sont généralement utilisées pour faciliter la communication entre, avec ou à propos
d'objets tels que des entités d'application, des personnes, des terminaux et des listes de distribution.
L'Annuaire joue un rôle important dans l'interconnexion des systèmes ouverts, dont le but est de permettre, moyennant
un minimum d'accords techniques en dehors des normes d'interconnexion proprement dites, l'interconnexion des
systèmes de traitement de l'information:
– provenant de divers fabricants;
– gérés différemment;
– de niveaux de complexité différents;
– de générations différentes.
Le but de la gestion de l'Annuaire est d'assurer que les informations d'annuaire précises et nécessaires soient disponibles
aux utilisateurs comme prévu, avec les temps de réponse, l'intégrité, la sécurité et le niveau de cohérence attendus. En
outre, la gestion-systèmes peut être réalisée en surchargeant aussi peu que possible le temps de traitement et la mémoire
sur les plates-formes et le système de communication.
L'Annuaire peut prendre en charge des applications de systèmes ouverts tels que des systèmes de messagerie, des
systèmes de classement, de transfert, d'accès et de gestion (FTAM, file transfer, access and management) et des
systèmes de traitement des transactions. Par conséquent, le système d'Annuaire peut être gérable à partir d'une plate-
forme intégrée de gestion-systèmes.
Les développants noteront qu'il existe un processus de résolution de défauts, et que des corrections peuvent être
apportées à la présente Recommendation | Norme internationale sous forme de corrigenda techniques. Les corrections
seront appliquées à la présente Recommendation | Norme internationale par un guide de développement. La liste des
corrigenda techniques approuvés peut être obtenue auprès du secrétariat du TSB/secrétariat du sous-comité. Les
corrigenda techniques publiés sont disponibles auprès de votre organisme de normalisation nationale. Le guide de
développement peut être téléchargé à partir du site UIT sur la Toile.
L'Annexe A, qui fait partie intégrante de la présente Recommandation | Norme internationale, définit les objets gérés,
utilisés pour l'administration d'agent de système d'Annuaire.
vi © ISO/CEI 1998 – Tous droits réservés

---------------------- Page: 6 ----------------------
ISO/CEI 9594-10 : 1998 (F)
NORME INTERNATIONALE
ISO/CEI 9594-10 : 1999 (F)
Rec. UIT-T X.530 (1997 F)
RECOMMANDATION UIT-T
TECHNOLOGIES DE L'INFORMATION – INTERCONNEXION DES
SYSTÈMES OUVERTS – L'ANNUAIRE: UTILISATION DE LA
GESTION-SYSTÈMES POUR L'ADMINISTRATION DE L'ANNUAIRE
SECTION 1 – GÉNÉRALITÉS
1 Domaine d’application
La présente spécification décrit et analyse les exigences de gestion de l'Annuaire afin d'identifier celles qui peuvent être
remplies par les services (et protocoles) de gestion-systèmes OSI, celles qui sont remplies par les services (et protocoles)
d'Annuaire, ainsi que celles qui sont remplies par des moyens locaux.
Fondée sur les exigences, cette spécification définit un modèle de gestion de l'Annuaire qui englobe toutes les exigences.
La gestion de l'Annuaire se répartit en quatre segments principaux:
a) gestion du domaine du DIT: gestion des informations d'Annuaire;
b) gestion de fonctionnement d'un seul DSA dans le DMD;
c) gestion de fonctionnement d'un seul DUA dans le DMD; et
d) gestion du domaine de gestion d'Annuaire (DMD, directory managenent domain): gestion intégrée des
composantes fonctionnelles de l'Annuaire.
La présente Recommandation | Norme internationale traite des points a), b) et c) ci-dessus. Le point d), gestion du
domaine de gestion d'Annuaire, fera l'objet d'une étude ultérieure.
Cette spécification, fondée sur le modèle, décrit en détail les objets gérés de la gestion-systèmes OSI utilisés pour gérer
les agents de système d'annuaire (DSA, directory system agent) et les agents utilisateurs d'annuaire (DUA, directory user
agent) dans un domaine d'Annuaire donné, et décrit en détail les objets gérés de la gestion-systèmes OSI utilisés pour
gérer les interfaces avec les DUA et les DSA dans d'autres domaines, comme illustré à la Figure 1.
annuaire global X.500
DMD DMD
responsabilité
DMD
de gestion
T0727140-96/d01
Figure 1 – Domaine d'application de la gestion d'Annuaire
FIGURE 1/X.530.[D01] = 3 CM
Rec. UIT-T X.530 (1997 F) 1

---------------------- Page: 7 ----------------------
ISO/CEI 9594-10 : 1998 (F)
2Références normatives
Les Recommandations et Normes internationales suivantes contiennent des dispositions qui, par suite de la référence qui
y est faite, constituent des dispositions valables pour la présente Recommandation | Norme internationale. Au moment de
la publication, les éditions indiquées étaient en vigueur. Toutes Reocmmandations et Normes sont sujettes à révision et
les parties prenantes aux accords fondés sur la présente Recommandation | Norme internationale sont invitées à
rechercher la possibilité d'appliquer les éditions les plus récentes des Recommandations et Normes indiquées ci-après.
Les membres de la CEI et de l'ISO possèdent le registre des Normes internationales en vigueur. Le Bureau de la
normalisation des télécommunications de l'UIT tient à jour une liste des Recommandations de l'UIT-T en vigueur.
2.1 Recommandations | Normes internationales identiques
– Recommandation UIT-T X.200 (1994) | ISO/CEI 7498-1:1994, Technologies de l'information –
Interconnexion des systèmes ouverts – Modèle de référence de base: Le modèle de référence de base.
– Recommandation UIT-T X.500 (1997) | ISO/CEI 9594-1:1999, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: vue d'ensemble des concepts, modèles et services.
– Recommandation UIT-T X.501 (1997) | ISO/CEI 9594-2:1997, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: les modèles.
– Recommandation UIT-T X.509 (1997) | ISO/CEI 9594-8:1999, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: cadre d'authentification.
– Recommandation UIT-T X.511 (1997) | ISO/CEI 9594-3:1997, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: définition du service abstrait.
– Recommandation UIT-T X.518 (1997) | ISO/CEI 9594-4:1997, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: procédure pour le fonctionnement réparti.
– Recommandation UIT-T X.519 (1997) | ISO/CEI 9594-5:1997, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: spécification du protocole.
– Recommandation UIT-T X.520 (1997) | ISO/CEI 9594-6:1997, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: types d'attributs sélectionnés.
– Recommandation UIT-T X.521 (1997) | ISO/CEI 9594-7:1997, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: classes d'objets sélectionnées.
– Recommandation UIT-T X.525 (1997) | ISO/CEI 9594-9:1999, Technologies de l'information –
Interconnexion des systèmes ouverts – L'annuaire: duplication.
– Recommandation UIT-T X.701 (1997) | ISO/CEI 10040:1997, Technologies de l'information –
Interconnexion des systèmes ouverts – Aperçu général de la gestion-systèmes.
– Recommandation X.720 du CCITT (1992) | ISO/CEI 10165-1:1993, Technologies de l'information –
Interconnexion des systèmes ouverts – Structure des informations de gestion: modèle d'information de
gestion.
– Recommandation X.721 du CCITT (1992) | ISO/CEI 10165-2:1992, Technologies de l'information –
Interconnexion des systèmes ouverts – Structure des informations de gestion: définition des informations
de gestion.
– Recommandation X.722 du CCITT (1992) | ISO/CEI 10165-4:1992, Technologies de l'information –
Interconnexion des systèmes ouverts – Structure des informations de gestion: directives pour la définition
des objets gérés.
– Recommandation UIT-T X.723 (1993) | ISO/CEI 10165-5:1994, Technologies de l'information –
Interconnexion des systèmes ouverts – Structure des informations de gestion: informations génériques de
gestion.
2.2 Paires de Recommandations | Normes internationales équivalentes par leur contenu technique
– Recommandation X.700 du CCITT (1992), Cadre de gestion pour l'interconnexion de systèmes ouverts
pour les applications du CCITT.
ISO/CEI 7498-4:1989, Systèmes de traitement de l'information – Interconnexion de systèmes ouverts –
Modèle de référence de base – Partie 4: Cadre général de gestion.
2 Rec. UIT-T X.530 (1997 F)

---------------------- Page: 8 ----------------------
ISO/CEI 9594-10 : 1998 (F)
– Recommandation X.710 du CCITT (1991), Définition du service commun de transfert d'informations de
gestion pour les applications du CCITT.
ISO/CEI 9595:1991, Technologies de l'information – Interconnexion de systèmes ouverts – Définition du
service commun d'informations de gestion.
– Recommandation X.711 du CCITT (1991), Spécification du protocole commun de transfert
d'informations de gestion pour les applications du CCITT.
ISO/CEI 9596-1:1991, Technologies de l'information – Interconnexion de systèmes ouverts – Protocole
commun d'information de gestion – Partie 1: Spécifications.
3 Définitions
Pour les besoins de la présente Recommandation | Norme Internationale, les définitions suivantes s'appliquent.
3.1 Définitions du modèle de référence OSI
Les termes suivants sont définis dans la Rec. UIT-T X.200 | ISO/CEI 7498-1:
a) entité d'application;
b) couche Application;
c) processus d'application;
d) unité de données du protocole d'application.
3.2 Définitions du cadre général de gestion
Les termes suivants sont définis dans la Rec. X.700 du CCITT et l'ISO/CEI 7498-4:
a) base d'informations de gestion;
b) objet géré.
3.3 Définitions de l'aperçu général de la gestion-systèmes
Les termes suivants sont définis dans la Rec. UIT-T X.701 | ISO/CEI 10040:
a) agent;
b) gestionnaire;
c) notification;
d) classe d'objets gérés.
3.4 Définitions du modèle d'informations de gestion
Les termes suivants sont définis dans la Rec. X.720 du CCITT | ISO/CEI 10165-1:
a) comportement;
b) bloc de propriétés conditionnel;
c) héritage;
d) arbre de dénomination;
e) bloc;
f) sous-classe;
g) super-classe.
3.5 Définitions du modèle d'Annuaire
Les termes suivants sont définis dans la Rec. UIT-T X.501 | ISO/CEI 9594-2:
a) contrôle d'accès;
b) domaine de gestion d'Annuaire d'administration;
Rec. UIT-T X.530 (1997 F) 3

---------------------- Page: 9 ----------------------
ISO/CEI 9594-10 : 1998 (F)
c) alias;
d) attribut;
e) type d’attribut;
f) valeur d’attribut;
g) authentification;
h) arbre d’informations d’Annuaire;
i) domaine de gestion d’Annuaire;
j) agent de système d'Annuaire;
k) entrée spécifique de DSA;
l) agent utilisateur d'Annuaire (DUA);
m) nom distinctif;
n) entrée;
o) nom;
p) objet (d'intérêt);
q) domaine de gestion privé d'Annuaire;
r) nom distinctif relatif;
s) racine;
t) schéma;
u) politique de sécurité;
v) objet subordonné;
w) entrée supérieure;
x) objet supérieur;
y) arbre;
z) utilisateur (d'Annuaire).
3.6 Définitions concernant l'exploitation répartie
Les termes suivants sont définis dans la Rec. UIT-T X.518 | ISO/CEI 9594-4:
a) association opérationnelle hiérarchique;
b) association opérationnelle hiérarchique non spécifique.
4 Abréviations
Pour les besoins de la présente Recommandation | Norme internationale les abréviations suivantes sont utilisées.
ADDMD Domaine de gestion d'annuaire d'administration (administration directory management domain)
CMIP Protocole commun d'informations de gestion (common management information protocol)
DAP Protocole d'accès à l'annuaire (directory access protocol)
DIB Base d'informations d'Annuaire (directory information base)
DISP Protocole de duplication miroir des informations de l'Annuaire (directory information
shadowing protocol)
DIT Arbre d'informations d'annuaire (directory information tree)
DMD Domaine de gestion d'Annuaire (directory management domain)
DOP Protocole de gestion d'association opérationnel
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.