ISO/TS 15926-11:2015
(Main)Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 11: Methodology for simplified industrial usage of reference data
Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 11: Methodology for simplified industrial usage of reference data
ISO/TS 15926-11:2015 defines a methodology for simplified industrial usage of reference data as defined in ISO/TS 15926-4 and is applicable to the plant life cycle phases in the process industry supply chain. The methodology is based on RDF triples, RDF Named Graphs and a standardized set of natural engineering language relationships resulting in a table that can be exchanged and shared easily in industry. ISO/TS 15926-11:2015 conforms to the ISO 15926-2 data model and is appropriate for use with ISO 15926 reference data libraries
Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de "process", y compris les usines de production de pétrole et de gaz — Partie 11: Méthodologie pour un usage industriel simplifié des données de référence
General Information
Relations
Standards Content (Sample)
TECHNICAL ISO/TS
SPECIFICATION 15926-11
First edition
2015-05-01
Industrial automation systems and
integration — Integration of life-cycle
data for process plants including oil
and gas production facilities —
Part 11:
Methodology for simplified industrial
usage of reference data
Systèmes d’automatisation industrielle et intégration — Intégration
de données de cycle de vie pour les industries de “process”, y compris
les usines de production de pétrole et de gaz —
Partie 11: Méthodologie pour un usage industriel simplifié des
données de référence
Reference number
©
ISO 2015
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms . 4
4 Fundamental concepts and assumptions . 4
4.1 Purpose and objectives . 4
4.2 Positioning of this part of ISO 15926 . 5
4.3 Use of statements within ISO 15926 . 6
4.4 Requirements of statements . 7
4.5 Representing statements in RDF triples . 8
4.6 RDF Named Graph .11
4.7 Connecting RDF with a Reference Data Library (RDL) .13
4.8 Use of RDF with a RDL of relationships .15
5 Methodology for using Named Graphs .16
5.1 Building constructs of the methodology .16
5.2 Named Graph methodology .17
5.3 Metadata of a Named Graph .19
5.4 Example Named Graph methodology within projects .19
5.4.1 Introducing the basic types of Named Graphs within this part of ISO 15926 .19
5.4.2 Introducing project specific individuals .21
5.4.3 Introducing project specific relationships .22
5.4.4 Introducing project specific statements .25
5.5 Example Named Graph methodology within product knowledge modelling .29
5.5.1 Introducing product specific individuals .29
5.5.2 Introducing project specific relationships .30
5.5.3 Introducing product specific statements .31
6 Reference Data .34
6.1 Origin of the initial set of relationships .34
6.2 Reference information models representing Systems Engineering .37
7 Initial set of reference relationships .53
8 Position of this part in relation with other parts and standards .54
8.1 The relationship of this part of ISO 15926 with ISO 15926-2 and ISO/TS 15926-7 .54
8.2 The relationship of this part of ISO 15926 with ISO 10303-233 .56
Annex A (normative) Initial set of relationships .57
Annex B (normative) Possible syntax formats of Named Graphs .58
Annex C (informative) Examples of application areas for this part of ISO 15926 .60
Annex D (informative) Origin of representation engineering data by triples .64
Bibliography .66
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any
patent rights identified during the development of the document will be in the Introduction and/or on
the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is Technical Committee ISO/TC 184, Automation systems
and integration, Subcommittee SC 4, Industrial data.
ISO 15926 is organized as a series of parts, each published separately. The structure of ISO 15926 is
described in ISO 15926-1.
ISO 15926 consists of the following parts, under the general title Industrial automation systems and
integration — Integration of life-cycle data for process plants including oil and gas production facilities:
— Part 1: Overview and fundamental principles;
— Part 2: Data model;
— Part 3: Reference data for geometry and topology [Technical Specification];
— Part 4: Initial reference data [Technical Specification];
— Part 6: Methodology for the development and validation of reference data [Technical Specification];
— Part 7: Implementation methods for the integration of distributed systems: Template methodology
[Technical Specification];
— Part 8: Implementation methods for the integration of distributed systems: Web Ontology Language
(OWL) implementation [Technical Specification];
— Part 11: Methodology for simplified industrial usage of reference data [Technical Specification]
The following parts are under preparation:
— Part 9: Implementation methods for the integration of distributed systems: Facade implementation
[Technical Specification];
— Part 10: Conformance testing [Technical Specification]
iv © ISO 2015 – All rights reserved
Introduction
ISO 15926 is an International Standard for the representation of process industries facility life-cycle
information. This representation is specified by a generic, conceptual data model that is suitable as the
basis for implementation in a shared database or data warehouse. The model is designed to be used in
conjunction with reference data, that is, standard instances that represent information common to a
number of users, production facilities, or both. The support for a specific life-cycle activity depends on
the use of appropriate reference data in conjunction with the model.
This part of ISO 15926 focuses on a simplified implementation of the afore mentioned data model in the
context of engineering data in the area of the process industry, including the oil, gas, process and power
industry and is intended for developers of configuration management processes and systems in general.
This part of ISO 15926 provides the capability to express a product model with RDF triples, RDF
Named Graphs and a standardized set of natural language relationships resulting in a table that can be
exchanged and shared easily in industry.
There is an industry need for this part of ISO 15926.
— The triple relationships are easy to understand by an engineer so that an engineer can understand
the product model. This has been proven by the NL Ship Building group who developed a Gellish-RDF
based implementation for standardized exchange of product data of HVAC equipment on a daily basis.
— The standard data sheets from API, NORSOK, etc. used in industry for pumps, compressors, instruments,
etc. can be supported by a Gellish-RDF product model enabling industry to continue to work with their
specific data sheets and yet exchanging the data in standardized way according this new standard.
This has been proven by the ICAAMC compressor group in a pilot for the API 617 data sheet.
— It is used in some projects, e.g. in the Pearl project for oil and gas.
— This part of ISO 15926 can be used as a front end engineering layer for the template methodology
used by ISO/TS 15926-7 and ISO/TS 15926-8, e.g. in the FIATECH project IIP. This will make the
content of those projects easier to access by engineers.
— An EPC contractor has used the draft of this part of ISO 15926 in various tunnel projects for
information modelling in the area of systems engineering which was required by the Dutch
authority regulations. With this part of ISO 15926 enriched by the knowledge from ISO/IEC 15288,
this became possible. They also built a performance measuring system for operational data in tunnel
installations where the methodology of this part of ISO 15926 is used to justify the performance to
the ministry of transportation in the Netherlands.
TECHNICAL SPECIFICATION ISO/TS 15926-11:2015(E)
Industrial automation systems and integration —
Integration of life-cycle data for process plants including
oil and gas production facilities —
Part 11:
Methodology for simplified industrial usage of reference data
1 Scope
This part of ISO 15926 enables a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.