Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions

This document specifies a test method for the measurement of the pitting potential of aluminium and aluminium alloys in sodium chloride solution of a mass fraction of 5 %, with a fixed concentration of acetic acid as the oxidant, using a two-electrode system. This document provides a simple method for ranking aluminium alloys and is especially useful for evaluating galvanic protection performance of thin clad materials because the test method causes little specimen damage.

Méthode à deux électrodes utilisant l'acide acétique pour mesurer le potentiel de piqûre de l'aluminium et des alliages d'aluminium dans des solutions de chlorure

General Information

Status
Published
Publication Date
13-Nov-2022
Current Stage
6060 - International Standard published
Start Date
14-Nov-2022
Due Date
07-Dec-2022
Completion Date
14-Nov-2022
Ref Project

Buy Standard

Standard
ISO 3079:2022 - Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions Released:14. 11. 2022
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 3079
First edition
2022-11
Two-electrode method using acetic
acid to measure pitting potential of
aluminium and aluminium alloys in
chloride solutions
Méthode à deux électrodes utilisant l'acide acétique pour mesurer le
potentiel de piqûre de l'aluminium et des alliages d'aluminium dans
des solutions de chlorure
Reference number
ISO 3079:2022(E)
© ISO 2022

---------------------- Page: 1 ----------------------
ISO 3079:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
 © ISO 2022 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 3079:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Field of application . 1
5 Comparison with conventional methods . 1
5.1 Anodic polarization curve measurement . 1
5.2 Corrosion potential. 2
6 General principles . 2
7 Apparatus . 3
7.1 Potentiometer . 3
7.2 Working electrode . 3
7.3 Reference electrode . 3
7.4 Stirrer . 3
8 Specimen . 4
9 Test procedure .4
9.1 Solution . 4
9.2 Test set-up . 5
9.3 Evaluation . 6
10 Test report . 6
Bibliography . 8
iii
© ISO 2022 – All rights reserved

---------------------- Page: 3 ----------------------
ISO 3079:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 156, Corrosion of metals and alloys.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
 © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
ISO 3079:2022(E)
Introduction
Aluminium and aluminium alloys show excellent corrosion resistance in near-neutral environments as
a result of the formation of an oxide or hydroxide film on their surface, thereby achieving passivation.
However, if the environment contains the chloride ion, the passive film will be broken, and localized
corrosion, such as pitting corrosion, can occur. Aluminium-clad material is used to prevent localized
corrosion by galvanic protection. In this method, the underlying core aluminium is protected by a
sacrificial layer whose pitting potential is lower than that of the core aluminium. Therefore, in order to
estimate the performance of galvanic protection, it is important to obtain the pitting potential.
Although anodic polarization curve measurement is one method for obtaining the pitting potential, the
method described in the test method in this document has several advantages in that it causes less
specimen damage, has a shorter measurement time and smaller specimen area, multiple measurements
are possible, and a two-electrode system is used. In an anodic polarization curve measurement, the
specimen is severely corroded due to excessive polarization. The method described in this document
causes less specimen corrosion, as the degree of polarization is small because the potential is maintained
near the pitting potential. This makes it possible to conduct repeated etching and measurements with
the same specimen, which is particularly useful for measurement of the depth profile of the pitting
potential in thin clad materials. As a method for measuring the corrosion potential of aluminium
alloys, ASTM G69 was established in 1997. ASTM G69 is widely used, substantially to obtain the pitting
potential without the anodic polarization curve measurement. In ASTM G69, 1 M (a mass fraction of
5,85 %) of sodium chloride is used as the solution and hydrogen peroxide is used as the oxidant. The
test method in this document, where a sodium chloride mass fraction of 5 % is used as the solution
and acetic acid is used as the oxidant, also has advantages over ASTM G69. In particular, it causes less
specimen damage and has a more stable oxidant with a buffer action.
v
© ISO 2022 – All rights reserved

---------------------- Page: 5 ----------------------
INTERNATIONAL
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.