ISO/IEC 10118-1:2016/Amd 1:2021

Information technology — Security techniques — Hash-functions — Part 1: General — Amendment 1: Padding methods for sponge functions

Technologies de l'information — Techniques de sécurité — Fonctions de hachage — Partie 1: Généralités — Amendement 1

General Information

• Status: Published
• Publication Date: 08-Mar-2021
• ICS: 35.030 - IT Security
• Technical Committee: ISO/IEC JTC 1/SC 27 - Information security, cybersecurity and privacy protection
• Drafting Committee: ISO/IEC JTC 1/SC 27/WG 2 - Cryptography and security mechanisms
• Current Stage: 6060 - International Standard published
• Start Date: 09-Mar-2021
• Due Date: 11-Jun-2023
• Completion Date: 09-Mar-2021

Relations

• Amends: ISO/IEC 10118-1:2016 - Information technology — Security techniques — Hash-functions — Part 1: General
• Effective Date: 18-Dec-2021

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 10118-1
Third edition
2016-10-15
AMENDMENT 1
2021-03
Information technology — Security
techniques — Hash-functions —
Part 1:
General
AMENDMENT 1: Padding methods for
sponge functions
Technologies de l'information — Techniques de sécurité — Fonctions
de hachage —
Partie 1: Généralités
AMENDEMENT 1
Reference number
ISO/IEC 10118-1:2016/Amd.1:2021(E)
©
ISO/IEC 2021

---------------------- Page: 1 ----------------------
ISO/IEC 10118-1:2016/Amd.1:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 10118-1:2016/Amd.1:2021(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that
are members of ISO or IEC participate in the development of International Standards through
technical committees established by the respective organization to deal with particular fields of
technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non-governmental, in liaison with ISO and IEC, also
take part in the work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives or www .iec .ch/ members
_experts/ refdocs).
Attention is drawn to the possibility that some of the elements of this document may be the subject
o
...

INTERNATIONAL ISO/IEC
STANDARD 10118-1
Third edition
2016-10-15
AMENDMENT 1
Information technology — Security
techniques — Hash-functions —
Part 1:
General
AMENDMENT 1: Padding methods for
sponge functions
Technologies de l'information — Techniques de sécurité — Fonctions
de hachage —
Partie 1: Généralités
AMENDEMENT 1
PROOF/ÉPREUVE
Reference number
ISO/IEC 10118-1:2016/Amd.1:2021(E)
©
ISO/IEC 2021

---------------------- Page: 1 ----------------------
ISO/IEC 10118-1:2016/Amd.1:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii PROOF/ÉPREUVE © ISO/IEC 2021 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 10118-1:2016/Amd.1:2021(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that
are members of ISO or IEC participate in the development of International Standards through
technical committees established by the respective organization to deal with particular fields of
technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other
international organizations, governmental and non-governmental, in liaison with ISO and IEC, also
take part in the work.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may
...