ISO/IEC 15693-3:2009/Amd 2:2015

Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol — Amendment 2: Clarification of use of Data Elements

Cartes d'identification — Cartes à circuit(s) intégré(s) sans contact — Cartes de voisinage — Partie 3: Anticollision et protocole de transmission — Amendement 2: Clarification de l'usage des éléments de données

General Information

• Status: Withdrawn
• Publication Date: 27-Jul-2015
• Withdrawal Date: 27-Jul-2015
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: ISO/IEC JTC 1/SC 17 - Cards and security devices for personal identification
• Drafting Committee: ISO/IEC JTC 1/SC 17/WG 8 - Integrated circuit cards without contacts
• Current Stage: 9599 - Withdrawal of International Standard
• Completion Date: 23-Apr-2019

Relations

• Revised: ISO/IEC 15693-3:2019 - Cards and security devices for personal identification — Contactless vicinity objects — Part 3: Anticollision and transmission protocol
• Effective Date: 22-Apr-2017
• Amends: ISO/IEC 15693-3:2009 - Identification cards — Contactless integrated circuit cards — Vicinity cards — Part 3: Anticollision and transmission protocol
• Effective Date: 14-Aug-2021
• Consolidated By: ISO 17423:2018 - Intelligent transport systems — Cooperative systems — Application requirements and objectives
• Effective Date: 06-Jun-2022

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 15693-3
Second edition
2009-04-15
AMENDMENT 2
2015-08-15
Identification cards — Contactless
integrated circuit cards — Vicinity
cards —
Part 3:
Anticollision and transmission
protocol
AMENDMENT 2: Clarification of use of
Data Elements
Cartes d’identification — Cartes à circuit(s) intégré(s) sans contact —
Cartes de voisinage —
Partie 3: Anticollision et protocole de transmission
AMENDEMENT 2: Clarification de l’usage des éléments de données
Reference number
ISO/IEC 15693-3:2009/Amd.2:2015(E)
©
ISO/IEC 2015

---------------------- Page: 1 ----------------------
ISO/IEC 15693-3:2009/Amd.2:2015(E)

COPYRIGHT PROTECTED DOCUMENT
©  ISO/IEC 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO/IEC 2015 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 15693-3:2009/Amd.2:2015(E)

Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the national bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 2 to ISO/IEC 15693-3:2009 was prepared by Technical Committee ISO/IEC/TC JTC 1,
Information technology, Subcommittee SC 17, Cards and personal identification.
© ISO/IEC 2015 – All rights reserved  iii

---------------------- Page: 3 ----------------------
ISO/IEC 15693-3:2009/Amd.2:2015(E)
Identification cards — Contactless integrated circuit cards
— Vicinity cards —
Part 3:
Anticollision and transmission protocol
AMENDMENT 2: Clarification of use of Data Elements
Page 25, 10.4.2
Replace:
“If the Option_flag is not set, the VICC shall return its response when it has completed the write operation
starting after:
t1nom [4352/fc (320,9 μs), see 9.1.1] + a multiple of 4096/fc (302 μs) with a total tolerance of ± 32/fc and
latest after 20 ms upon detection of the rising edge of the EOF of the VCD request.
If it is set, the VICC shall wait for the reception of an EOF from the VCD and upon such reception shall
return its response.“
with the following text:
“Option_flag definition see 9.5”
Page 26, 10.4.3
Replace:
“If the Option_flag is not set, the VICC shall return its response when it has completed the lock operation
starting after:
t1nom [4352/fc (320,9 μs), see 9.1.1] + a multiple of 4096/fc (302 μs) with a total tolerance of ± 32/fc and
latest after 20 ms upon detection of the rising edge of the EOF of the VCD request.
...