iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO/TS 10303-403:2008

(Main)

Industrial automation systems and integration — Product data representation and exchange — Part 403: Application module: AP203 configuration controlled 3D design of mechanical parts and assemblies

Industrial automation systems and integration — Product data representation and exchange — Part 403: Application module: AP203 configuration controlled 3D design of mechanical parts and assemblies

ISO/TS 10303-403:2008 specifies the application module for AP203 configuration controlled 3D design of mechanical parts and assemblies. The following are within the scope of ISO/TS 10303-403:2008: products that are mechanical parts and assemblies; product definition data and configuration control data pertaining to the design phase of a product's development; representation of an instance of a part in an assembly through its usage in a sub-assembly; three dimensional shape representations of a part that includes: geometrically and topologically bounded wireframe models; geometrically bounded surface models; topologically bounded solid models with facetted, elementary and advanced faces; non surface bounded solid models including constructive solid geometry, curve swept and other swept solids, thickened face solid; solids with construction history; topologically bounded manifold surface and subsurface and non manifold surface models; topologically bounded compound models; geometric validation properties to allow the translation of geometric shape representations (advanced boundary representation and faceted boundary representation solids) to be checked for quality; geometric and dimensional tolerances applied to geometric shape representations; materials and their composition of chemical substance; composite material structure and shape; catalogue data characterized by property value pairs; three dimensional presentation of product data: arranging geometric elements in layers and groups and assigning colours; presentation styles for points, curves, surfaces and sections, including hatching and tiling; saved views of particular camera positions and sections; textual annotation and notes applied to geometric elements; presentation of geometric and dimensional tolerances; technical drawings as two dimensional presentation of product data.

Systèmes d'automatisation industrielle et intégration — Représentation et échange de données de produits — Partie 403: Module d'application: Gestion de configuration 3D relative à l'AP203 des pièces et assemblages mécaniques

General Information

Status
Withdrawn
Publication Date
14-Dec-2008
Withdrawal Date
14-Dec-2008
ICS
25.040.40 - Industrial process measurement and control
Technical Committee
ISO/TC 184/SC 4 - Industrial data
Drafting Committee
ISO/TC 184/SC 4/WG 3 - Oil, Gas, Process and Power
Current Stage
9599 - Withdrawal of International Standard
Completion Date
18-May-2010
Ref Project

Buy Standard

ISO/TS 10303-403:2008 - Industrial automation systems and integration -- Product data representation and exchangeISO/TS 10303-403:2008 - Industrial automation systems and integration -- Product data representation and exchange
PreviousNext
Technical specification
ISO/TS 10303-403:2008 - Industrial automation systems and integration -- Product data representation and exchange
English language
164 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

TECHNICAL Application
SPECIFICATION modules for
ISO
10303-203
Published
2008-12-15

Industrial automation systems and
integration — Product data
representation and exchange
Application modules for ISO 10303-203
Systèmes d'automatisation industrielle et intégration — Représentation
et échange de données de produits
Modules d'application pour l'ISO 10303-203




Reference number
ISO 10303-203 Application modules:2008(E)
©
ISO 2008

---------------------- Page: 1 ----------------------
ISO 10303-203 Application modules:2008(E)

ISO 10303 supports many different product information exchange and sharing scenarios which contain common information
requirements. The ISO 10303 application modules contain reusable data models for key collections of product information within
ISO 10303, which can be combined to support information exchange for different business scenarios. By reusing these models,
users will save the cost of remodelling common information structures, and can be assured of interoperable data exchange
processes.
This CD-ROM contains 91 application modules in HTML format, forming part of the ISO 10303 series of documents. These 91
application modules, together with 86 other application modules already published, are intended for use with Application
protocol 203 (ISO/TS 10303-203:2005, currently under revision), which specifies the application protocol for configuration controlled
three-dimensional design of parts and assemblies. The application modules will also be used in other ISO 10303 parts currently
under development, and are available for developers to use as core information models for product data.
Each application module is published as a separate part: 403, 1001, 1003 to 1004, 1007 to 1009, 1012, 1022, 1025 to 1027, 1032,
1040, 1103 to 1104, 1106, 1109 to 1112, 1115, 1129 to 1132, 1136, 1206, 1215 to 1216, 1231, 1233, 1248, 1275, 1291, 1308 to
1324, 1327, 1329 to 1331, 1345, 1349, 1362, 1366, 1369, 1509, 1514, 1628, 1652, 1654 to 1655, 1667, 1672, 1681, 1702, 1715,
1747, 1749 to 1750, 1753, 1760, 1762, 1767 to 1768, 1770 to 1773, 1775 to 1780, 1782.
All parts are first editions except the following:
⎯ ISO/TS 10303-403, ISO/TS 10303-1007, ISO/TS 10303-1008, ISO/TS 10303-1009, ISO/TS 10303-1012, ISO/TS 10303-1022,
ISO/TS 10303-1025, ISO/TS 10303-1026, ISO/TS 10303-1040, ISO/TS 10303-1103, ISO/TS 10303-1104, ISO/TS 10303-
1109, ISO/TS 10303-1110, ISO/TS 10303-1112, ISO/TS 10303-1115, ISO/TS 10303-1129, ISO/TS 10303-1132,
ISO/TS 10303-1206, ISO/TS 10303-1215, ISO/TS 10303-1216, ISO/TS 10303-1231, ISO/TS 10303-1233, ISO/TS 10303-
1248, ISO/TS 10303-1275, ISO/TS 10303-1349, ISO/TS 10303-1366, ISO/TS 10303-1509, ISO/TS 10303-1514,
ISO/TS 10303-1628, ISO/TS 10303-1652, ISO/TS 10303-1654, ISO/TS 10303-1655, ISO/TS 10303-1667, ISO/TS 10303-
1672, ISO/TS 10303-1681, ISO/TS 10303-1702, ISO/TS 10303-1715, ISO/TS 10303-1747, ISO/TS 10303-1749,
ISO/TS 10303-1750, ISO/TS 10303-1753, ISO/TS 10303-1760 and ISO/TS 10303-1762, which are second editions and
replace respectively ISO/TS 10303-403:2005, ISO/TS 10303-1007:2001, ISO/TS 10303-1008:2001, ISO/TS 10303-1009:2001,
ISO/TS 10303-1012:2004, ISO/TS 10303-1022:2004, ISO/TS 10303-1025:2004, ISO/TS 10303-1026:2004, ISO/TS 10303-
1040:2004, ISO/TS 10303-1103:2005, ISO/TS 10303-1104:2005, ISO/TS 10303-1109:2005, ISO/TS 10303-1110:2005,
ISO/TS 10303-1112:2005, ISO/TS 10303-1115:2005, ISO/TS 10303-1129:2005, ISO/TS 10303-1132:2004, ISO/TS 10303-
1206:2005, ISO/TS 10303-1215:2004, ISO/TS 10303-1216:2004, ISO/TS 10303-1231:2005, ISO/TS 10303-1233:2004,
ISO/TS 10303-1248:2004, ISO/TS 10303-1275:2004, ISO/TS 10303-1349:2005, ISO/TS 10303-1366:2006, ISO/T
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO/TR 3151-1:2023(Main)
Visualization elements of PLM-MES interface — Part 1: Overview

This document outlines the visualization elements for data exchange between the Product Lifecycle Management and Manufacturing Execution System (PLM-MES) or Manufacturing Operations Management (MOM). The following are within the scope of this document: — the need for a PLM-MES interface; — the technical elements that make up the PLM-MES interface; — the visualization elements of the PLM-MES interface. The following is outside the scope of this document: — application of the PLM-MES interface and its visualization elements.

  • Technical report
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
  • Draft
    29 pages
    English language
    sale 15% off
ISO
ISO/TS 15926-11:2023(Main)
Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities — Part 11: Simplified industrial usage of reference data based on RDFS methodology

This document enables a flexible creation of product knowledge models and data that supports systems engineering processes. The payload or design data can be exchanged across organizations or with the supply chain by combining resource description framework (RDF) triples, reference data dictionaries and a standardized set of relationships. This document is appropriate for use with the ISO 15926-series based reference data libraries, and it is applicable to the process industry, including oil, gas and power. However, manufacturing and aerospace industries can also benefit from this document. The following are within the scope of this document: — process plants in accordance with ISO 15926-1; — a methodology with low threshold for using reference data in combination with RDF triples for representing statements as defined in the ISO 15926 series; — an initial set of relationships required for process plant life-cycle representation; — a method to implement configuration management to trace back additions, changes and deletions in product and project data and enabling baselining; — data sharing, integration, exchange, and hand-over between computer systems. The following are outside the scope of this document: — serialisation methods; — definition of reference data libraries; — the syntax and format of implementations of either product data models or instance data using this document, or both; — any specific methods and guidelines other than RDF(S) for implementing ISO 15926-2.

  • Technical specification
    72 pages
    English language
    sale 15% off
  • Draft
    71 pages
    English language
    sale 15% off
  • Draft
    71 pages
    English language
    sale 15% off
ISO
ISO 8000-117:2023(Main)
Data quality — Part 117: Application of ISO 8000-115 to identifiers in distributed ledgers including blockchains

This document specifies requirements for using identifiers in distributed ledgers including blockchains. These requirements supplement those of ISO 8000-115. The following are within the scope of this document: — requirements for each identifier in distributed ledgers including blockchains, where the ledger enables supply chains to exchange transaction data; — requirements for the off‑ledger data set that is referenced by an identifier in a distributed ledger; — off-ledger data sets that consist only of property-value tuples, where each tuple is the result of semantic encoding. The following are outside the scope of this document: — requirements for implementing distributed ledger technology including blockchains; — requirements for technology to ensure immutability of data sets; — requirements for the processes of creating identifiers; — requirements for the processes of creating the content of off‑ledger data sets; — requirements for the processes of creating immutable data sets.

  • Standard
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off
  • Draft
    7 pages
    English language
    sale 15% off
ISO
ISO 8000-51:2023(Main)
Data quality — Part 51: Data governance: Exchange of data policy statements

This document specifies requirements that support the exchange of data governance policy statements and automated conformance testing of data sets to the data specifications referenced by policy statements. The following are within the scope of this document: — requirements for the syntax and semantics of identifiers for organizations issuing data governance policy statements; — requirements for the syntax and semantics of identifiers for data governance policy statements; — data specifications referenced by data governance policy statements, where those specifications are computer processable. The following are outside the scope of this document: — general processes, roles and responsibilities for performing data governance; EXAMPLE An approach to data governance is covered by ISO/IEC 38505-1 and ISO/IEC TR 38505-2. — requirements for the syntax and semantics of data specifications referenced by a data governance policy statement; — requirements for the syntax and semantics of data governance policy statements; — methods used for the creation of data governance policy statements; — methods used for measuring conformance with the requirements referenced by data governance policy statements; — methods used for monitoring conformance with the requirements referenced by data governance policy statements.

  • Standard
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
ISO
ISO 8000-2:2022(Main)
Data quality — Part 2: Vocabulary

This document defines terms relating to data quality. These terms are used by the parts in the ISO 8000 series.

  • Standard
    25 pages
    English language
    sale 15% off
  • Draft
    25 pages
    English language
    sale 15% off
  • Draft
    25 pages
    English language
    sale 15% off
ISO
ISO/TS 8000-82:2022(Main)
Data quality — Part 82: Data quality assessment: Creating data rules

This document describes how data rules apply to various types of data. Such rules exist to sustain the integrity and reliability of data by capturing requirements into a form that can be processed by databases and other information systems. The following are within the scope of this document: — fundamental concepts of data rules; — key characteristics of data rules for common types of data, where these types are identifier, currency value, quantity, date or time, rate, free‑text entry, code and key; — how data profiling contributes to formulating effective data rules. The following is outside the scope of this document: — specific rules for specific sets of data. This document can be used in conjunction with or independently of standards for quality management systems. EXAMPLE 1 ISO 9001 specifies requirements for quality management systems. This document can also be used in conjunction with or independently of standards for more detailed definitions of data types. EXAMPLE 2 ISO/IEC 11404 specifies the nomenclature and shared semantics for a collection of datatypes commonly occurring in programming languages and software interfaces. EXAMPLE 3 IEC 61360‑1 specifies principles for the definition of the properties and associated attributes and explains the methods for representing verbally defined concepts.

  • Technical specification
    8 pages
    English language
    sale 15% off
ISO
ISO 8000-64:2022(Main)
Data quality — Part 64: Data quality management: Organizational process maturity assessment: Application of the Test Process Improvement method

This document specifies how to apply the Test Process Improvement method to the assessment of organizational process maturity. This document refines the language in the method, which has an original purpose of more than just data quality management. This document supports improving data quality management when an organization uses the process reference model in ISO 8000‑61 as the foundation for specifying the measurement goals for the process measurement necessary when performing maturity assessment. The following are within scope of this document: — the relationship between the Test Process Improvement method[11][12] and the procedure for assessing process maturity of data quality management as specified by ISO 8000‑61; — the role of process measurement in accordance with ISO 8000‑63 when performing assessment of process maturity; — the outputs from the procedure. The following are outside the scope of this document: — the purpose, outcomes and activities of processes for data quality management; — specific content for the scope of individual quality management areas, the maturity levels and the maturity level targets; — specific content for each inspection order including the frequency of inspection points; — instructions on how to develop a process improvement strategy in response to the outputs of the procedure. This document can be used in conjunction with or independently of quality management systems standards.

  • Standard
    15 pages
    English language
    sale 15% off
ISO
ISO 8000-150:2022(Main)
Data quality — Part 150: Data quality management: Roles and responsibilities

This document specifies the key considerations for organizations that are establishing appropriate roles and responsibilities for data quality management. The following are within the scope of this document: — implementing roles and responsibilities for data quality management; — providing documentary evidence of this implementation; — a framework for roles and responsibilities; — a functional model of roles and responsibilities; — example deployment scenarios for the framework of roles and responsibilities; — comparison with the processes specified by ISO 8000‑61. The following are outside the scope of this document: — process reference models for data quality management (ISO 8000‑61 specifies a process reference model for data quality management); — methods for data quality evaluation and certification; — models for assessing the maturity of data quality management (ISO 8000‑62 and ISO 8000‑64 specify approaches to assessing the maturity of data quality management). This document can be used in conjunction with or independently of standards for quality management systems.

  • Standard
    28 pages
    English language
    sale 15% off
ISO
ISO 8000-1:2022(Main)
Data quality — Part 1: Overview

This document provides an overview of the ISO 8000 series. The following are within the scope of this document: — stating the scope of the ISO 8000 series as a whole; — establishing the principles of information and data quality; — describing the path to data quality; — describing the structure of the ISO 8000 series; — providing a summary of the content of each part in the ISO 8000 series; — establishing the relationship of the ISO 8000 series to other international standards.

  • Standard
    20 pages
    English language
    sale 15% off
ISO
ISO 17506:2022(Main)
Industrial automation systems and integration — COLLADATM digital asset schema specification for 3D visualization of industrial data

This document describes the COLLADA™ schema. COLLADA is a Collaborative Design Activity that defines an XML-based schema to enable 3D authoring applications to freely exchange digital assets without loss of information, enabling multiple software packages to be combined into extremely powerful tool chains. The purpose of this document is to provide a specification for the COLLADA schema in sufficient detail to enable software developers to create tools to process COLLADA resources. In particular, it is relevant to those who import to or export from digital content creation (DCC) applications, 3D interactive applications and tool chains, prototyping tools, real-time visualization applications such as those used in the video game and movie industries, and CAD tools. This document covers the initial design and specifications of the COLLADA schema, as well as a minimal set of requirements for COLLADA exporters. This document covers the following information: initial design and specifications of the COLLADA schema; requirements of COLLADA tools and a minimal set of requirements for COLLADA exporters; detailed explanations for COLLADA programming; core elements that describe geometry, animation, skinning, assets, and scenes; physics model, visual effects (FX), boundary representation (B-rep) of animation, kinematics. The document does not specify the implementation of, or definition of a run-time architecture for viewing or processing of COLLADA data.

  • Standard
    477 pages
    English language
    sale 15% off
  • Draft
    477 pages
    English language
    sale 15% off