ISO/FDIS 17842-2

Safety of amusement rides and amusement devices

Sécurité des manèges et des dispositifs de divertissement

General Information

• Status: Published
• ICS: 97.200.40 - Playgrounds
• Technical Committee: ISO/TC 254 - Safety of amusement rides and amusement devices
• Drafting Committee: ISO/TC 254/WG 3 - Operation and use
• Current Stage: 5020 - FDIS ballot initiated: 2 months. Proof sent to secretariat
• Start Date: 14-Dec-2021
• Completion Date: 14-Dec-2021

RELATIONS

• Revised: ISO 17842-2:2015 - Safety of amusement rides and amusement devices
• Effective Date: 23-Apr-2020

Standards Content (sample)

FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 17842-2
ISO/TC 254
Safety of amusement rides and
Secretariat: GOST R
amusement devices —
Voting begins on:
2021-12-14
Part 2:
Voting terminates on:
Operation and use
2022-02-08
Sécurité des manèges et des dispositifs de divertissement —
Partie 2: Fonctionnement et utilisation
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 17842-2:2021(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2021
---------------------- Page: 1 ----------------------
ISO/FDIS 17842-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO 2021 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/FDIS 17842-2:2021(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Terms and definitions .................................................................................................................................................................................... 2

4 Operation, maintenance and use of amusement rides and amusement devices .............................5

4.1 General ........................................................................................................................................................................................................... 5

4.2 Standard documentation ........................................................................................................................................... .................... 5

4.3 Responsibilities of the controller ........................................................................................................................................... 6

4.3.1 General ........................................................................................................................................................................................ 6

4.3.2 Selection and training of staff ................................................................................................................................ 6

4.3.3 Assembly and disassembly ........................................................................................................................................ 7

4.3.4 Care of equipment ............................................................................................................................................................. 9

4.3.5 Trial operations and checks ..................................................................................................................................12

4.3.6 Operation ............................................................................................................................................................................... 13

4.3.7 Duties for the supervision of the operation ............................................................................................ 15

4.3.8 Servicing (maintenance, repair and modification) ........................................................................... 16

4.4 Duties of the amusement device operator .................................................................................................................. 17

4.4.1 General requirements ................................................................................................................................................. 18

4.4.2 Safe operation .................................................................................................................................................................... 18

4.5 Duties of the attendant ................................................................................................................................................................. 19

4.6 Independent inspection ............................................................................................................................................................... 20

4.6.1 In-service inspection ...................................................................................................................................................20

4.6.2 Reports ..................................................................................................................................................................................... 20

4.7 Emergency situations ....................................................................................................................................................................20

4.7.1 General .....................................................................................................................................................................................20

4.7.2 Means of evacuation and escape ....................................................................................................................... 20

4.7.3 Fire ............................................................................................................................................................................................... 20

Annex A (informative) Training, qualification and experience for competent persons ...........................23

Annex B (informative) Provisions prior to use ......................................................................................................................................24

Bibliography .............................................................................................................................................................................................................................27

iii
© ISO 2021 – All rights reserved
---------------------- Page: 3 ----------------------
ISO/FDIS 17842-2:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to

the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 254, Safety of amusement rides and

amusement devices.

This second edition cancels and replaces the first edition (ISO 17842-2:2015), which has been

technically revised.
The main changes are as follows:
— references to ISO/TS 17929 have been removed;
— the list of terms in Clause 3 has been updated;
— 4.2, Standard documentation has been updated;
— 4.3.3.3.1, General has been added;
— 4.3.4.1, General has been added;
— 4.3.4.4.3, Operating control equipment has been updated;
— 4.3.4.4.4, Control equipment operated by passengers has been updated;
— 4.3.5.2, Daily check and trial run has been updated;
— 4.3.6.1, During operating cycle has been updated;
— 4.3.8.3, Repairs has been updated;
— 4.3.8.4, Modification has been updated;
— 4.6.1.2, Inspection process and 4.6.2, Reports have been added;
— Table A.1 was updated;
© ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/FDIS 17842-2:2021(E)
— Annex B has been added;
— Bibliography was updated.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
© ISO 2021 – All rights reserved
---------------------- Page: 5 ----------------------
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 17842-2:2021(E)
Safety of amusement rides and amusement devices —
Part 2:
Operation and use
1 Scope

This document specifies the minimum requirements necessary to ensure the safe maintenance,

operation, inspection and testing of amusement rides and amusement devices which are intended to be

installed both repeatedly without degradation or loss of integrity, and temporarily or permanently in

fairgrounds and amusement parks or any other locations, and is concerned with the installing, assembly

and disassembly, operating, handling, maintaining, repairing, modifying and inspecting of amusement

devices, and is addressed to controllers, operators, attendants and inspection bodies.

The following are not covered by this document (this list is not exhaustive):
— grandstands;
— construction site installations;
— scaffolding;
— removable agricultural structures;
— simple coin-operated children's amusement devices;

— carrying up to three children, and recreational devices like waterslides or summer toboggan runs;

— playground equipment;
— rope courses;
— climbing walls;
— inflatable trampolines and swimming pool equipment.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 2307, Fibre ropes — Determination of certain physical and mechanical properties

ISO 9554, Fibre ropes — General specifications

ISO 7165, Fire fighting — Portable fire extinguishers — Performance and construction

ISO 13857, Safety of machinery — Safety distances to prevent hazard zones being reached by upper and

lower limbs

ISO/IEC 17020, Conformity assessment — Requirements for the operation of various types of bodies

performing inspection

ISO 17842-1, Safety of amusement rides and amusement devices — Design and manufacture

© ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
ISO/FDIS 17842-2:2021(E)

ISO 17842-3, Safety of amusement rides and amusement devices — Requirements for inspection during

design, manufacture, operation and use

IEC 60947-3, Low-voltage switchgear and controlgear — Part 3: Switches, disconnectors, switch-

disconnectors and fuse-combination units
EN 12385, Steel wire ropes — Safety
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO/IEC 17020, ISO 17842-1 and

the following apply.

ISO and IEC maintain terminology databases for use in standardization at the following addresses:

— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
amusement device

arrangement of equipment that produces the desired effect of amusement or entertainment when the

passenger moves through it or on it primarily by his or her own action, or any other system that is not

covered by the term amusement ride (3.3)
3.2
amusement device log

book and/or electronic data file containing all the necessary information about the use and history of

any amusement device (3.1)
3.3
amusement ride

device to entertain passengers (3.21) during motion, creating biomechanical effects on passengers

Note 1 to entry: In this document, the term “amusement device” is used to refer to an amusement device (3.1) or

amusement ride.
3.4
attendant

trained person appointed to work under the supervision of an operator (3.20), to assist in the operation

of an amusement device (3.1) available for use by the public.
3.5
barrier
device intended to prevent the user from falling and from passing beneath
3.6
competent person

person who can demonstrate that they have acquired through training, qualifications or experience, or

a combination of these, the knowledge and skills enabling them to perform a specified task

3.7
component
component which forms part of an assembly in which at least one component moves
Note 1 to entry: Excluding vibration and deformation.
© ISO 2021 – All rights reserved
---------------------- Page: 7 ----------------------
ISO/FDIS 17842-2:2021(E)
3.8
controller
ride controller
person or organisation having overall control of an amusement device (3.1).

Note 1 to entry: This can be either an individual or corporate body owning an amusement device (3.1) or the

concessionaire or lessee who has been granted control of the amusement device, by the owner, for a specified

period.
3.9
designer
engineer
person or body responsible for the design of a device (or modifications thereof)

Note 1 to entry: The duties of designer include, but are not limited to, establishing and describing the configuration

of the amusement ride or device, conducting appropriate risk assessment(s), establishing strength (including

fatigue strength), designing and specifying electrical/electronic control systems, defining the acceptable quality

level for production, defining inspection criteria and including the provision of the necessary documentation

3.10
design review

document detailing the review of all the applicable design documents, to determine the suitability for

use of a device
3.11
design risk assessment
DRA

document produced by the designer (3.9) as a tool for a safe design within the agreed scope of supply

3.12
fence

structure designed to restrict or prevent movement across a boundary without changing elevation

3.13
gate

section of fence (3.12) or barrier (3.5) that can be opened to provide access or egress

3.14
guest
person who interacts with an amusement device
3.15
initial approval

design and calculation review, verification, examinations and tests executed by the inspecting body

before a device is first made available for public use
3.16
inspection body

organization capable of carrying out examination, tests and approval of amusement devices

3.17
manufacturer

individual or commercial entity who is responsible for manufacturing a product with the view to

placing it on the market under their own name

Note 1 to entry: Any commercial operator that either places a product on the market under their own name or

trademark or modifies a product in such a way that compliance with applicable requirements can be affected

should be considered the manufacturer and should assume the obligations of the manufacturer.

© ISO 2021 – All rights reserved
---------------------- Page: 8 ----------------------
ISO/FDIS 17842-2:2021(E)
3.18
modification

safety-related alteration to the hardware or software of a device, including the introduction of a new

safety-related component or the substitution of a safety-related component, which results in a deviation

from the design specification
3.19
operation and use risk assessment
OURA

document, produced by the controller, that details all of the considered risks inherent during all modes

of amusement device operation and the means taken to mitigate against them
Note 1 to entry: See 5.1.2.2.
3.20
operator

trained person appointed by the controller (3.8) to be in charge of the operation of an amusement device

when it is available for the public
3.21
passenger
patron
person using an amusement device
3.22
passenger containment

components (e.g. seating, foot wells, handrails, passenger restraints) designed to prevent passengers

from moving outside a predetermined area on a ride either as a result of biomechanical effects, the ride

forces or the reasonably foreseeable behaviour of the passenger
3.23
passenger unit

part or parts of an amusement ride in or on which the passengers (3.21) are intended to ride

3.24
permit

authorization to operate an amusement device in a particular member state granted by the legally

authorised body after successful approval and/or examination
3.25
platform
horizontal or inclined surface raised above the level of an adjacent area
Note 1 to entry: See ISO 17842-1:2015, 5.1.3.2 for maximum slope of platform.
3.26
repair
restoration of components or assemblies to a technically acceptable condition
Note 1 to entry: See also ISO 17842-3:2019, 4.3.8.3.
3.27
restraint

system, device, or characteristic that is intended to inhibit or restrict the body movement and/or

keep the body position to tolerate accelerations of the passenger(s) while on the amusement ride or

amusement device

Note 1 to entry: Position in which the restraint is intended to remain during the operation of the device in order

to restrain the passenger (3.21) is called closed restraint.
© ISO 2021 – All rights reserved
---------------------- Page: 9 ----------------------
ISO/FDIS 17842-2:2021(E)
3.28
safety envelope

theoretical or actual physical space that can be encroached upon by any part of a passenger (3.22) of an

amusement ride during the ride cycle
3.29
safety-related component

component of an amusement device (3.1) on which the safety of the passengers (3.21) is dependent as

identified in the design risk assessment (3.11) and/or the operation and use risk assessment (3.19)

3.30
service

replacement or replenishment and check of conditions of components, including fluids which are

designated to be replaced or replenished or checked at specified intervals
3.31
spectator
person in the vicinity of an amusement device

Note 1 to entry: Typically defined as a person watching the operation of the amusement device or waiting to gain

access to the use the amusement device.
3.32
thorough examination

procedures and investigations necessary for the inspection body (3.16) to decide whether the

amusement device (3.1) can continue to be operated safely, or whether it requires defects to be remedied

immediately or within a specified time
3.33
trial run

proving run of an amusement device (3.1) during which no passengers (3.21) are carried

4 Operation, maintenance and use of amusement rides and amusement devices
4.1 General

This document is concerned with the installing, assembly and disassembly, operating, handling,

maintaining, repairing, modifying and inspecting of amusement devices, and is addressed to controllers,

operators, attendants and inspection bodies.

Recommendations for training, qualification and experience for competent people performing the

design, maintenance, repair and testing of amusement rides are given in Annex A.

Information on the provisions that are recommended prior to use of attractions and recommendations

on procedures to be followed are given in Annex B.
4.2 Standard documentation
The following documents shall be prepared for all amusement devices:

— operating manual (see ISO 17842-1:2015, 5.5.1.3) to include at least the following:

— maintenance instructions;
— NDT schedule;
— operating instruction;
— inspection instruction;
© ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
ISO/FDIS 17842-2:2021(E)
— inspection instruction;
— amusement device log (see ISO 17842-1:2015, Annex D), and

— official technical dossier or safety justification (see ISO 17841-1:2015, 5.8) including DRA and OURA

results for safe operation.
4.3 Responsibilities of the controller
4.3.1 General
The controller or nominated delegate(s) shall:

— ensure that the required documentation accompanies the amusement device when being bought,

sold or otherwise transferred or supplied;
— select and train operators and attendants;
— assemble, and disassemble safely;

— ensure safe operation in full conformance with manuals, taking into consideration current legislative

statutes which are effective in the country of installation of amusement ride or device;

— service, maintain, repair and modify safely;

— where required, ensure that only amusement rides or devices which have a valid operational permit

and are examined and tested by appropriate independent inspection bodies, are operated;

— maintain, keep available and update as required the operating manual and amusement ride or

amusement device log, as well as creating necessary reports;

— where operators do not have a clear view of all loading or unloading points, ensure that a clear

system of signals for checking with attendants that it is safe to start is devised. Ensure that every

person using the system is instructed on how to use it and that a copy of the signal code is displayed

in appropriate positions;

— ensure that emergency procedures are established, well-documented and regularly practiced; and

— provide full instructions on the control or communications system.

The ride controller can delegate any part of their duties, but remains responsible in law.

4.3.2 Selection and training of staff

Obtaining suitable and competent staff involves selection, training, testing of knowledge and

understanding, monitoring, auditing and keeping records. The controller shall select people able to put

the safety of the public first, likely to follow procedures conscientiously and having the maturity and

authority to give confidence to the public.

Adequate training shall be provided to all employees and training records kept. Training shall be

appropriate to the risks and given in a way that those being trained can understand.

The operator and attendants of amusement devices shall demonstrate competency in the operation of

amusement devices according to the manual(s).

No operators or attendants of the amusement device shall be younger than required by national

standards or law in the country of use.

Operators and attendants depending on their duties, shall be provided with suitable and sufficient

information and training in the working of their amusement devices, covering the following:

— systems of work for safe operation, including speed limits and any other specific safety measures;

© ISO 2021 – All rights reserved
---------------------- Page: 11 ----------------------
ISO/FDIS 17842-2:2021(E)
— procedures for reporting breakdown, defects or unusual occurrences;
— loading and unloading procedures;

— passenger restrictions such as height and weight limits, medical conditions and limited accessibility

(guest behaviour);
— control of waiting and viewing areas;

— use and operation of passenger containment and passenger restraint systems including the checking

of restraint closure;
— controlled/emergency stop procedures;
— emergency procedures, including passenger evacuation.
4.3.3 Assembly and disassembly
4.3.3.1 Siting of amusement devices
4.3.3.1.1 General

Amusement devices shall be sited and assembled in accordance with manufacturer’s instructions,

taking into account applicable national requirements.

4.3.3.1.2 Standard conditions for the siting of amusement rides and amusement devices

The ride controller or their representative shall ensure that an amusement device is only sited on

ground which is suitable for this purpose in accordance with the manual(s). For example ensure that

the ground

— can safely bear the load of the amusement device. For existing structures (e.g. buildings or piers) a

detailed inspection and calculation shall be carried out in order to establish permissible loads;

— is sufficiently flat, even and stable for the attraction to be assembled and used on safely, in accordance

with the amusement device log and manual;
— provides discharge or drainage of rain water.

The ground shall be checked at regular intervals after assembly, to confirm that there is no deterioration

in its load bearing capacity, especially during adverse weather conditions.

The controller shall establish the position of underground services or overhead lines which can present

hazards during the assembly or operation of the amusement device, taking advice as necessary from

the appropriate authority. Where these could be a source of danger to persons employed or to members

of the public, all reasonably practicable precautions shall be taken to prevent such danger, either by the

provision of adequate and suitably placed barriers or otherwise.

Care shall be taken to ensure that underground services are not struck when poles or pegs are placed in

the ground or when excavation is undertaken. Service location techniques shall be employed before any

such work is commenced, unless it has been confirmed beforehand that there are no services present.

NOTE There can be local regulations that define the minimum distance between amusement devices and

other structures, objects, services, etc.

When positioning amusement devices, controllers shall apply the following principles:

a) The proximity to other fixed or mobile structures or services shall be in accordance with

ISO 17842-1.
© ISO 2021 – All rights reserved
---------------------- Page: 12 ----------------------
ISO/FDIS 17842-2:2021(E)

b) There shall be sufficient clearance between adjacent amusement devices, buildings or other

occupied areas to minimize the risk of fire spread.
c) Consideration shall be given to any possibility of uplift caused by wind.

d) Amusement devices shall be arranged so that the public have safe access to each amusement

device entrance, and safe egress at exit points, so that there are no bottlenecks which could cause

overcrowding in an emergency.

e) Sufficient clearance shall be provided between and above amusement devices on main access

routes, so as to provide access for emergency service vehicles, and provide access to fixed fire

hydrants even when the public is being evacuated.

f) Where rides cross over or pass through each other, as a minimum the clearance envelopes for each

ride shall apply as stated in ISO 17842-1. The controllers shall ensure that safety envelopes for both

passengers and spectators are not compromised. For coin-operated children's rides, spacing can

vary providing the safety envelopes are not thereby compromised.

g) The OURA needs to consider whether protection is required to prevent falling objects from hitting

passengers or spectators.

NOTE National regulations can exist that define the minimum distance amusement rides and amusement

devices from other structures, objects, services, etc.
4.3.3.2 Transportation, assembly and disassembly

When amusement devices are transported, assembled or disassembled on site the devices shall be

under the direct supervision of the controller and/or competent delegate(s).
4.3.3.3 Ground packing, stability and anchors
4.3.3.3.1 General

All necessary measures shall be taken during assembly to ensure that the amusement device will be

stable when in use.

No amusement device shall be assembled on sloping or uneven ground, unless suitable packing has

been incorporated which allows the amusement device to be used safely.

The amusement device shall be level where necessary and have its load adequately distributed and

firmly supported. Its stability shall be checked frequently.

The number of packing pieces used shall be kept to a minimum. The height of the packing material shall

be kept to a minimum and the packing itself shall be stable.

All packing materials incorporated shall be sound and suitable for the purpose, chosen and located in

accordance with the manual(s), so as to prevent slipping and sinking, or dislodgement.

Packing shall be placed directly beneath the support points of the amusement device. If this cannot be

achieved a suitable supporting structure shall be formed which effectively transmits the load of the

...