ISO/IEC 8825-1:2008
(Main)Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1:
Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1:
ISO/IEC 8825-1:2008 specifies a set of basic encoding rules that can be used to derive the specification of a transfer syntax for values of types defined using the notation specified in ISO/IEC 8824-1, ISO/IEC 8824-2, ISO/IEC 8824-3, and ISO/IEC 8824-4, collectively referred to as Abstract Syntax Notation One or ASN.1. These basic encoding rules can also be applied for decoding such a transfer syntax in order to identify the data values being transferred. ISO/IEC 8825-1:2008 also specifies a set of canonical and distinguished encoding rules that restrict the encoding of values to just one of the alternatives provided by the basic encoding rules.
Technologies de l'information — Règles de codage ASN.1: Spécification des règles de codage de base (BER), des règles de codage canoniques (CER) et des règles de codage distinctives (DER) — Partie 1:
General Information
Relations
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 8825-1
Fourth edition
2008-12-15
Information technology — ASN.1
encoding rules: Specification of Basic
Encoding Rules (BER), Canonical
Encoding Rules (CER) and Distinguished
Encoding Rules (DER)
Technologies de l'information — Règles de codage ASN.1:
Spécification des règles de codage de base (BER), des règles de
codage canoniques (CER) et des règles de codage distinctives (DER)
Reference number
ISO/IEC 8825-1:2008(E)
©
ISO/IEC 2008
---------------------- Page: 1 ----------------------
ISO/IEC 8825-1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO/IEC 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published by ISO in 2009
Published in Switzerland
ii © ISO/IEC 2008 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 8825-1:2008(E)
CONTENTS
Page
Foreword . v
Introduction . vi
1 Scope. 1
2 Normative references . 1
2.1 Identical Recommendations | International Standards . 1
2.2 Additional references . 1
3 Definitions. 2
4 Abbreviations . 2
5 Notation. 2
6 Convention . 3
7 Conformance . 3
8 Basic encoding rules. 3
8.1 General rules for encoding. 3
8.1.1 Structure of an encoding . 3
8.1.2 Identifier octets .4
8.1.3 Length octets.5
8.1.4 Contents octets . 6
8.1.5 End-of-contents octets. 6
8.2 Encoding of a boolean value. 6
8.3 Encoding of an integer value . 7
8.4 Encoding of an enumerated value. 7
8.5 Encoding of a real value. 7
8.6 Encoding of a bitstring value . 8
8.7 Encoding of an octetstring value. 9
8.8 Encoding of a null value . 10
8.9 Encoding of a sequence value. 10
8.10 Encoding of a sequence-of value . 10
8.11 Encoding of a set value . 11
8.12 Encoding of a set-of value . 11
8.13 Encoding of a choice value . 11
8.14 Encoding of a value of a prefixed type . 11
8.15 Encoding of an open type. 12
8.16 Encoding of an instance-of value. 12
8.17 Encoding of a value of the embedded-pdv type. 12
8.18 Encoding of a value of the external type. 12
8.19 Encoding of an object identifier value . 14
8.20 Encoding of a relative object identifier value .14
8.21 Encoding of an OID internationalized resource identifier value. 15
8.22 Encoding of a relative OID internationalized resource identifier value. 15
8.23 Encoding for values of the restricted character string types . 15
8.24 Encoding for values of the unrestricted character string type. 17
8.25 Encoding for values of the Useful Types. 17
8.26 Encoding for values of the TIME type and the useful time types . 17
8.26.1 Encoding for values of the TIME type . 17
8.26.2 Encoding for values of the DATE type . 18
8.26.3 Encoding for values of the TIME-OF-DAY type. 18
8.26.4 Encoding for values of the DATE-TIME type . 18
8.26.5 Encoding for values of the DURATION type. 18
© ISO/IEC 2008 – All rights reserved iii
---------------------- Page: 3 ----------------------
ISO/IEC 8825-1:2008(E)
9 Canonical encoding rules . 18
9.1 Length forms. 18
9.2 String encoding forms. 18
9.3 Set components . 18
10 Distinguished encoding rules . 19
10.1 Length forms. 19
10.2 String encoding forms. 19
10.3 Set components . 19
11 Restrictions on BER employed by both CER and DER. 19
11.1 Boolean values . 19
11.2 Unused bits. 19
11.3 Real values . 20
11.4 GeneralString values. 20
11.5 Set and sequence components with default value . 20
11.6 Set-of components. 20
11.7 GeneralizedTime. 20
11.8 UTCTime . 21
11.8.4 Examples of valid representations . 21
11.8.5 Examples of invalid representations . 21
11.9 The TIME type and the useful time types . 21
12 Use of BER, CER and DER in transfer syntax definition.22
Annex A Example of encodings. 23
A.1 ASN.1 description of the record structure.23
A.2 ASN.1 description of a record value. 23
A.3 Representation of this record value. 23
Annex B Identification of Encoding Rules. 25
Annex C Illustration of real value encoding. 26
iv © ISO/IEC 2008 – All rights reserved
---------------------- Page: 4 ----------------------
ISO/IEC 8825-1:2008(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
ISO/IEC 8825-1 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology,
Subcommittee SC 6, Telecommunications and information exchange between systems, in collaboration with
ITU-T. The identical text is published as Rec. ITU-T X.690 (11/2008).
This fourth edition cancels and replaces the third edition (ISO/IEC 8825-1:2002), which has been technically
revised. It also incorporates the Amendments ISO/IEC 8825-1:2002/Amd.1:2004 and
ISO/IEC 8825-1:2002/Amd.2:2007, and the Technical Corrigendum ISO/IEC 8825-1:2002/Cor.1:2007.
ISO/IEC 8825 consists of the following parts, under the general title Information technology — ASN.1
encoding rules:
⎯ Part 1: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished
Encoding Rules (DER)
⎯ Part 2: Specification of Packed Encoding Rules (PER)
⎯ Part 3: Specification of Encoding Control Notation (ECN)
⎯ Part 4: XML Encoding Rules (XER)
⎯ Part 5: Mapping W3C XML schema definitions into ASN.1
⎯ Part 6: Registration and application of PER encoding instructions
© ISO/IEC 2008 – All rights reserved v
---------------------- Page: 5 ----------------------
ISO/IEC 8825-1:2008(E)
Introduction
ITU-T Rec. X.680 | ISO/IEC 8824-1, ITU-T Rec. X.681 | ISO/IEC 8824-2, ITU-T Rec. X.682 | ISO/IEC 8824-3,
ITU-T Rec. X.683 | ISO/IEC 8824-4 (Abstract Syntax Notation One or ASN.1) together specify a notation for the
definition of abstract syntaxes, enabling application standards to define the types of information they need to transfer.
It also specifies a notation for the specification of values of a defined type.
This Recommendation | International Standard defines encoding rules that may be applied to values of types defined
using the ASN.1 notation. Application of these encoding rules produces a transfer syntax for such values. It is implicit
in the specification of these encoding rules that they are also to be used for decoding.
There may be more than one set of encoding rules that can be applied to values of types that are defined using the
ASN.1 notation. This Recommendation | International Standard defines three sets of encoding rules, called basic
encoding rules, canonical encoding rules and distinguished encoding rules. Whereas the basic encoding rules give the
sender of an encoding various choices as to how data values may be encoded, the canonical and distinguished encoding
rules select just one encoding from those allowed by the basic encoding rules, eliminating all of the sender's options.
The canonical and distinguished encoding rules differ from each other in the set of restrictions that they place on the
basic encoding rules.
The distinguished encoding rules is more suitable than the canonical encoding rules if the encoded value is small
enough to fit into the available memory and there is a need to rapidly skip over some nested values. The canonical
encoding rules is more suitable than the distinguished encoding rules if there is a need to encode values that are so large
that they cannot readily fit into the available memory or it is necessary to encode and transmit a part of a value before
the entire value is available. The basic encoding rules is more suitable than the canonical or distinguished encoding
rules if the encoding contains a set value or set-of value and there is no need for the restrictions that the canonical and
distinguished encoding rules impose. This is due to the memory and CPU overhead that the latter encoding rules exact
in order to guarantee that set values and set-of values have just one possible encoding.
Annex A gives an example of the application of the basic encoding rules. It does not form an integral part of this
Recommendation | International Standard.
Annex B summarizes the assignment of object identifier and OID internationalized resource identifier values made in
this Recommendation | International Standard. It does not form an integral part of this Recommendation | International
Standard.
Annex C gives examples of applying the basic encoding rules for encoding reals. It does not form an integral part of
this Recommendation | International Standard.
vi © ISO/IEC 2008 – All rights reserved
---------------------- Page: 6 ----------------------
ISO/IEC 8825-1:2008 (E)
INTERNATIONAL STANDARD
ISO/IEC 8825-1 : 1995 (E)
ITU-T Rec. X.690 (1994 E)
ITU-T RECOMMENDATION
Information technology – ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER),
Canonical Encoding Rules (CER)
and Distinguished Encoding Rules (DER)
1 Scope
This Recommendation | International Standard specifies a set of basic encoding rules that may be used to derive the
specification of a transfer syntax for values of types defined using the notation specified in ITU-T Rec. X.680 |
ISO/IEC 8824-1, ITU-T Rec. X.681 | ISO/IEC 8824-2, ITU-T Rec. X.682 | ISO/IEC 8824-3, and ITU-T Rec. X.683 |
ISO/IEC 8824-4, collectively referred to as Abstract Syntax Notation One or ASN.1. These basic encoding rules are
also to be applied for decoding such a transfer syntax in order to identify the data values being transferred. It also
specifies a set of canonical and distinguished encoding rules that restrict the encoding of values to just one of the
alternatives provided by the basic encoding rules.
2 Normative references
The following Recommendations and International Standards contain provisions which, through reference in this text,
constitute provisions of this Recommendation | International Standard. At the time of publication, the editions indicated
were valid. All Recommendations and Standards are subject to revision, and parties to agreements based on this
Recommendation | International Standard are encouraged to investigate the possibility of applying the most recent
edition of the Recommendations and Standards listed below. Members of IEC and ISO maintain registers of currently
valid International Standards. The Telecommunication Standardization Bureau of the ITU maintains a list of currently
valid ITU-T Recommendations.
2.1 Identical Recommendations | International Standards
– ITU-T Recommendation X.680 (2008) | ISO/IEC 8824-1:2008, Information technology – Abstract
Syntax Notation One (ASN.1): Specification of basic notation.
– ITU-T Recommendation X.681 (2008) | ISO/IEC 8824-2:2008, Information technology – Abstract
Syntax Notation One (ASN.1): Information object specification.
– ITU-T Recommendation X.682 (2008) | ISO/IEC 8824-3:2008, Information technology – Abstract
Syntax Notation One (ASN.1): Constraint specification.
– ITU-T Recommendation X.683 (2008) | ISO/IEC 8824-4:2008, Information technology – Abstract
Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications.
2.2 Additional references
– ISO International Register of Coded Character Sets to be used with Escape Sequences.
– ISO/IEC 2022:1994, Information technology – Character code structure and extension techniques.
– ISO/IEC 2375:2003, Information technology – Procedure for registration of escape sequences and
coded character sets.
– ISO 6093:1985, Information processing – Representation of numerical values in character strings for
information interchange.
– ISO/IEC 6429:1992, Information technology – Control functions for coded character sets.
– ISO/IEC 10646:2003, Information technology – Universal Multiple-Octet Coded Character Set (UCS).
ITU-T Rec. X.690 (11/2008) 1
---------------------- Page: 7 ----------------------
ISO/IEC 8825-1:2008 (E)
3 Definitions
For the purposes of this Recommendation | International Standard, the definitions of ITU-T Rec. X.200 | ISO/IEC
7498-1 and ITU-T Rec. X.680 | ISO/IEC 8824-1 and the following definitions apply.
3.1 canonical encoding: A complete encoding of an abstract value obtained by the application of encoding rules
that have no implementation-dependent options. Such rules result in the definition of a 1-1 mapping between
unambiguous and unique encodings and values in the abstract syntax.
3.2 constructed encoding: A data value encoding in which the contents octets are the complete encoding of one
or more data values.
3.3 contents octets: That part of a data value encoding which represents a particular value, to distinguish it from
other values of the same type.
3.4 data value: Information specified as the value of a type; the type and the value are defined using ASN.1.
3.5 dynamic conformance: A statement of the requirement for an implementation to adhere to the prescribed
behaviour in an instance of communication.
3.6 encoding (of a data value): The complete sequence of octets used to represent the data value.
3.7 end-of-contents octets: Part of a data value encoding, occurring at its end, which is used to determine the end
of the encoding.
NOTE – Not all encodings require end-of-contents octets.
3.8 identifier octets: Part of a data value encoding which is used to identify the type of the value.
NOTE – Some ITU-T Recommendations use the term "data element" for this sequence of octets, but the term is not used in this
Recommendation | International Standard, as other Recommendations | International Standards use it to mean "data value".
3.9 length octets: Part of a data value encoding following the identifier octets which is used to determine the end
of the encoding.
3.10 primitive encoding: A data value encoding in which the contents octets directly represent the value.
3.11 receiver: An implementation decoding the octets produced by a sender, in order to identify the data value
which was encoded.
3.12 sender: An implementation encoding a data value for transfer.
3.13 static conformance: A statement of the requirement for support by an implementation of a valid set of
features from among the defined features.
3.14 trailing 0 bit: A 0 in the last position of a bitstring value.
NOTE – The 0 in a bitstring value consisting of a single 0 bit is a trailing 0 bit. Its removal produces an empty bitstring.
4 Abbreviations
For the purposes of this Recommendation | International Standard, the following abbreviations apply:
ASN.1 Abstract Syntax Notation One
BER Basic Encoding Rules of ASN.1
CER Canonical Encoding Rules of ASN.1
DER Distinguished Encoding Rules of ASN.1
ULA Upper Layer Architecture
UTF8 Universal Transformation Function 8-bit (see ISO/IEC 10646, Annex D)
5 Notation
This Recommendation | International Standard references the notation defined by ITU-T Rec. X.680 | ISO/IEC 8824-1.
2 ITU-T Rec. X.690 (11/2008)
---------------------- Page: 8 ----------------------
ISO/IEC 8825-1:2008 (E)
6 Convention
6.1 This Recommendation | International Standard specifies the value of each octet in an encoding by use of the
terms "most significant bit" and "least significant bit".
NOTE – Lower layer specifications use the same notation to define the order of bit transmission on a serial line, or the
assignment of bits to parallel channels.
6.2 For the purposes of this Recommendation | International Standard only, the bits of an octet are numbered
from 8 to 1, where bit 8 is the "most significant bit", and bit 1 is the "least significant bit".
6.3 For the purpose of this Recommendation | International Standard, two octet strings can be compared. One
octet string is equal to another if they are of the same length and are the same at each octet position. An octet string, S ,
1
is greater than another, S , if and only if either:
2
a) S and S have identical octets in every position up to and including the final octet in S , but S is
1 2 2 1
longer; or
b) S and S have different octets in one or more positions, and in the first such position, the octet in S is
1 2 1
n–1
greater than that in S , considering the octets as unsigned binary numbers whose bit n has weight 2 .
2
7 Conformance
7.1 Dynamic conformance is specified by clauses 8 to 12 inclusive.
7.2 Static conformance is specified by those standards which specify the application of one or more of these
encoding rules.
7.3 Alternative encodings are permitted by the basic encoding rules as a sender's option. Receivers who claim
conformance to the basic encoding rules shall support all alternatives.
NOTE – Examples of such alternative encodings appear in 8.1.3.2 b) and Table 3.
7.4 No alternative encodings are permitted by the Canonical Encoding Rules or Distinguished Encoding Rules.
8 Basic encoding rules
8.1 General rules for encoding
8.1.1 Structure of an encoding
8.1.1.1 The encoding of a data value shall consist of four components which shall appear in the following order:
a) identifier octets (see 8.1.2);
b) length octets (see 8.1.3);
c) contents octets (see 8.1.4);
d) end-of-contents octets (see 8.1.5).
8.1.1.2 The end-of-contents octets shall not be present unless the value of the length octets requires them to be
present (see 8.1.3).
8.1.1.3 Figure 1 illustrates the structure of an encoding (primitive or constructed). Figure 2 illustrates an alternative
constructed encoding.
Identifier octets Length octets Contents octets
The number of octets
in the contents octets
(see 8.1.3.2) X.690_F1
Figure 1 – Structure of an encoding
ITU-T Rec. X.690 (11/2008) 3
---------------------- Page: 9 ----------------------
ISO/IEC 8825-1:2008 (E)
Identifier octets Length octets Contents octets End-of-contents octets
Indicates that the contents Indicates that there are
octets are terminated by no further encodings
end of contents octets in the contents octets
(see 8.1.3.6)
X.690_F2
Figure 2 – An alternative constructed encoding
8.1.1.4 Encodings specified in this Recommendation | International Standard are not affected by either the ASN.1
subtype notation or the ASN.1 type extensibility notation.
NOTE – This means that all constraint notation is ignored when determining encodings, and all extensibility markers in CHOICE,
SEQUENCE and SET are ignored, with the extensions treated as if they were in the extension root of the type.
8.1.1.5 There are no encoding instructions (see ITU-T Rec. X.680 | ISO/IEC 8824-1, 3.8.27) defined for the
encoding rules specified in this Recommendation | International Standard.
8.1.2 Identifier octets
8.1.2.1 The identifier octets shall encode the ASN.1 tag (class and number) of the type of the data value.
8.1.2.2 For tags with a number ranging from zero to 30 (inclusive), the identifier octets shall comprise a single octet
encoded as follows:
a) bits 8 and 7 shall be encoded to represent the class of the tag as specified in Table 1;
b) bit 6 shall be a zero or a one according to the rules of 8.1.2.5;
c) bits 5 to 1 shall encode the number of the tag as a binary integer with bit 5 as the most significant bit.
Table 1 – Encoding of class of tag
Class Bit 8 Bit 7
Universal 0 0
Application 0 1
Context-specific 1 0
Private 1 1
8.1.2.3 Figure 3 illustrates the form of an identifier octet for a type with a tag whose number is in the range zero
to 30 (inclusive).
Identifier octet
8765 4321
Bits
Tag number
Class P/C
0 = Primitive
1 = Constructed
X.690_F3
Figure 3 – Identifier octet (low tag number)
8.1.2.4 For tags with a number greater than or equal to 31, the identifier shall comprise a leading octet followed by
one or more subsequent octets.
8.1.2.4.1 The leading octet shall be encoded as follo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.