ISO/IEC 8859-9:1989
(Main)Information processing — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5
- BACK
- 10-May-1989
- 10-May-1989
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
Information processing — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5
Traitement de l'information — Jeux de caractères graphiques codés sur un seul octet — Partie 9: Alphabet Latin no 5
General Information
Relations
This May Also Interest You
ISO/IEC 8859 consists of several parts. Each part specifies a set of up to 191 graphic characters and the coded representation of these characters by means of a single 8-bit byte. Each set is intended for use for a particular group of languages. ISO/IEC 8859-7:2003 specifies a set of 188 coded graphic characters identified as Latin/Greek alphabet. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: English, Greek, and Latin. This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. ISO/IEC 8859-7:2003 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367, or their corresponding G1 sets from the ISO International Register of Coded Character Sets to be Used with Escape Sequences, should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see Clause 6). NOTE ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.
- Standard9 pagesEnglish languagesale 15% off
- 27-Oct-2003
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
ISO/IEC 2375:2003 specifies the procedures to be followed for preparing, maintaining, and publishing a register of escape sequences and of the coded character sets they identify. The registration process specified in ISO/IEC 2375:2003 is not a procedure for standardization of characters or coded character sets. Organizations that wish ISO and/or IEC to create an international standard for a coded character set or that wish ISO and/or IEC to code additional characters into ISO/IEC 10646 need to follow the ISO/IEC procedures for doing so. In particular, Registration of a coded character set according to the procedures specified by ISO/IEC 2375:2003 implies no commitment by ISO and/or IEC to adopt the coded character set as an ISO/IEC standard. The existence of a character in an approved registration does not imply a commitment by ISO and/or IEC to encode that character into ISO/IEC 10646. ISO/IEC 2022 describes the escape sequences referenced in ISO/IEC 2375:2003, except for escape sequences reserved in ISO/IEC 2022 for private use. The use of these escape sequences includes code extension, that is, the provision of additional sets of characters, or of additional control functions, in accordance with ISO/IEC 2022. An escape sequence registered in accordance with ISO/IEC 2375:2003 serves as an identification of the character, the set of characters, or the control function associated with it in the register. The registration itself does not specify the rules in accordance with which a character or character set identified by an escape sequence is to be used. Rather, the registration identifies the documents (for example, standards) which specify such rules.
- Standard25 pagesEnglish languagesale 15% off
- 18-Feb-2003
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
This International Standard a) specifies the coded representation of the characters; b) specifies a repertoire of the Latin alphabetic and non-alphabetic characters for the communication of text in many European languages using the Latin script; c) specifies rules for the definitions and use of graphic character subrepertoires, i.e. subsets of the specified character repertoire.
- Standard40 pagesEnglish languagesale 15% off
- Standard45 pagesEnglish languagesale 10% offe-Library read for×1 day
- 19-Dec-2001
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
This part of ISO/IEC 8859 specifies a set of 183 coded graphic characters identified as Latin/Thai alphabet. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: Thai, English and Latin. Some of the characters in this set are combining characters (see clause 6). This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. This part of ISO/IEC 8859 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367 or their corresponding G1 sets from ?ISO International Register of Coded Character Sets to be used with escape sequences', should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see clause 6). NOTE ? ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.
- Standard10 pagesEnglish languagesale 15% off
- 12-Dec-2001
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
This part of ISO/IEC 8859 specifies a set of 191 coded graphic characters identified as Latin alphabet No. 10. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: Albanian, Croatian, English, Finnish, French, German, Hungarian, Irish Gaelic (new orthography), Italian, Latin, Polish, Romanian, and Slovenian. This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. This part of ISO/IEC 8859 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367, or their corresponding G1 sets from the ISO International Register of Coded Character Sets to be Used with Escape Sequences, should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see clause 6). NOTE ? ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- 18-Jul-2001
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
This part of ISO/IEC 8859 specifies a set of 191 coded graphic characters identified as Latin alphabet No. 9. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: Albanian, Basque, Breton, Catalan, Danish, Dutch, English, Estonian, Faroese, Finnish, French, Frisian, Galician, German, Greenlandic, Icelandic, Irish Gaelic (new orthography), Italian, Latin, Luxemburgish, Norwegian, Portuguese, RhaetoRomanic, Scottish Gaelic, Spanish, and Swedish. This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. This part of ISO/IEC 8859 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367 should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see clause 6). NOTE – ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.
- Standard9 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- 10-Mar-1999
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
- Standard12 pagesEnglish languagesale 15% off
- 20-Jan-1999
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
This part of ISO/IEC 8859 specifies a set of 191 coded graphic characters identified as Latin alphabet No. 5. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: Albanian, Basque, Breton, Catalan, Danish, Dutch, English, Faroese, Finnish, French (with restrictions, see Annex A.1, Notes), Frisian, Galician, German, Greenlandic, Irish Gaelic (new orthography), Italian, Latin, Luxemburgish, Norwegian, Portuguese, Rhaeto-Romanic, Scottish Gaelic, Spanish, Swedish and Turkish. This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. This part of ISO/IEC 8859 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367 should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see clause 6). NOTE ? ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.
- Standard10 pagesEnglish languagesale 15% off
- 20-Jan-1999
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
This part of ISO/IEC 8859 specifies a set of 191 coded graphic characters identified as the Latin/ Cyrillic alphabet. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: Bulgarian, Byelorussian, English, Latin, (Slavic) Macedonian, Russian, Serbian and Ukrainian. NOTE ? Two letters recently added to the Ukrainian official alphabet are not included in the character set of this part. For a background the CEN/CENELEC/PT004 Report may be consulted (in Bibliography). This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. This part of ISO/IEC 8859 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367 should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see clause 6). NOTE ? ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesEnglish languagesale 15% off
- 20-Jan-1999
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
This part of ISO/IEC 8859 specifies a set of 191 coded graphic characters identified as Latin alphabet No. 2. This set of coded graphic characters is intended for use in data and text processing applications and also for information interchange. The set contains graphic characters used for general purpose applications in typical office environments in at least the following languages: Albanian, Croat, Czech, English, German, Hungarian, Latin, Polish, Romanian, Slovak, Slovene and Sorbian. This set of coded graphic characters may be regarded as a version of an 8-bit code according to ISO/IEC 2022 or ISO/IEC 4873 at level 1. This part of ISO/IEC 8859 may not be used in conjunction with any other parts of ISO/IEC 8859. If coded characters from more than one part are to be used together, by means of code extension techniques, the equivalent coded character sets from ISO/IEC 10367 should be used instead within a version of ISO/IEC 4873 at level 2 or level 3. The coded characters in this set may be used in conjunction with coded control functions selected from ISO/IEC 6429. However, control functions are not used to create composite graphic symbols from two or more graphic characters (see clause 6). NOTE ? ISO/IEC 8859 is not intended for use with Telematic services defined by ITU-T. If information coded according to ISO/IEC 8859 is to be transferred to such services, it will have to conform to the requirements of those services at the access-point.
- Standard10 pagesEnglish languagesale 15% off
- Standard14 pagesEnglish languagesale 10% offe-Library read for×1 day
- 20-Jan-1999
- 35.040
- 35.040.10
- ISO/IEC JTC 1/SC 2
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.