SIST-V ETSI/EG 201 299-2 V2.1.1:2003

Integrated Services Digital Network (ISDN) - Network Integration Testing (NIT) - ISDN End-to-end testing - Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the network

Concurrent TTCN error corrections.

Digitalno omrežje z integriranimi storitvami (ISDN) - Preskušanje integriranosti omrežja (NIT) - Preskušanje ISDN od konca do konca - 2. del: Abstraktni preskuševalni niz (ATS) in delna dodatna informacija za preskušanje izvedbe protokola (PIXIT) - Proforma specifikacije za omrežje

General Information

• Status: Published
• Publication Date: 31-Oct-2003
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Nov-2003
• Due Date: 01-Nov-2003
• Completion Date: 01-Nov-2003
• Ref Project: ETSI EG 201 299-2 V2.1.1 (2000-03) - Integrated Services Digital Network (ISDN); Network Integration Testing (NIT); ISDN End-to-end testing; Part 2: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the network

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-V ETSI/EG 201 299-2 V2.1.1:2003
01-november-2003
Digitalno omrežje z integriranimi storitvami (ISDN) - Preskušanje integriranosti
omrežja (NIT) - Preskušanje ISDN od konca do konca - 2. del: Abstraktni
preskuševalni niz (ATS) in delna dodatna informacija za preskušanje izvedbe
protokola (PIXIT) - Proforma specifikacije za omrežje
Integrated Services Digital Network (ISDN) - Network Integration Testing (NIT) - ISDN
End-to-end testing - Part 2: Abstract Test Suite (ATS) and partial Protocol
Implementation eXtra Information for Testing (PIXIT) proforma for the network
Ta slovenski standard je istoveten z: EG 201 299-2 Version 2.1.1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST-V ETSI/EG 201 299-2 V2.1.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003

---------------------- Page: 2 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
ETSI EG 201 299-2 V2.1.1 (2000-03)
ETSI Guide
Integrated Services Digital Network (ISDN);
Network Integration Testing (NIT);
ISDN End-to-end testing;
Part 2: Abstract Test Suite (ATS) and
partial Protocol Implementation eXtra Information
for Testing (PIXIT) proforma for the network
�

---------------------- Page: 3 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
2 ETSI EG 201 299-2 V2.1.1 (2000-03)
Reference
REG/SPAN-05213-2
Keywords
ATS, ISDN, NIT, PIXIT, testing
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
Individual copies of this ETSI deliverable
can be downloaded from
http://www.etsi.org
If you find errors in the present document, send your
comment to: [e-mail]
Important notice
This ETSI deliverable may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
3 ETSI EG 201 299-2 V2.1.1 (2000-03)
Contents
Intellectual Property Rights.5
Foreword .5
Introduction .5
1 Scope.6
2 References.6
3 Definitions.9
3.1 Definitions related to conformance testing.9
3.2 Definitions related to EN 300 403-1 .9
3.3 Definitions related to test purpose descriptions.9
4 Abbreviations .12
5 Abstract Test Method.13
5.1 Description of ATM used.13
5.2 Test method.13
6 Conformance to this ICS and IXIT proformas specification .14
7 ATS Conformance .14
Annex A (normative): End-to-end ICS proforma.15
A.1 Guidance for completing the ICS proforma.15
A.1.1 Purposes and structure.15
A.1.2 Abbreviations and conventions.15
A.1.3 Instructions for completing the ICS proforma .16
A.2 Identification of the implementation.17
A.2.1 Date of the statement .17
A.2.2 Implementation Under Test (IUT) identification.17
A.2.3 ICS contact person.17
A.3 Identification of the document .18
A.4 Basic ISDN capabilities .18
A.5 Network signalling protocol.18
A.6 ISDN-ISDN Interworking .19
A.6.1 Basic call .19
A.6.2 ISDN Supplementary services.20
ETSI

---------------------- Page: 5 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
4 ETSI EG 201 299-2 V2.1.1 (2000-03)
Annex B (normative): Partial End-to-end IXIT proforma.28
B.1 Instructions for completing the IXIT proforma.28
B.2 Identification summary .28
B.3 Abstract test suite summary .28
B.4 IXIT items .29
B.5 Test campaign report.32
Annex C (normative): Abstract Test Suite (ATS).38
C.1 The TTCN Graphical form (TTCN.GR).38
C.2 The TTCN Machine Processable form (TTCN.MP) .38
Bibliography.39
History.40
ETSI

---------------------- Page: 6 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
5 ETSI EG 201 299-2 V2.1.1 (2000-03)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Guide (EG) has been produced by ETSI Technical Committee Services and Protocols for Advanced
Networks (SPAN).
The present document is part 1 of a multi-part EG covering Integrated Services Digital Network (ISDN); Network
Integration Testing (NIT); ISDN/PSTN end-to-end testing, as identified below:
Part 1: "Test Suite Structure and Test Purposes (TSS&TP) specification";
Part 2: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma for the network".
Introduction
The present document contains the Abstract Test Suite (ATS), Implementation Conformance Statement (ICS) and
Implementation eXtra Information for Testing (IXIT) list developed in the EURESCOM project P613 "Methodology
and tools for ISDN Network Integration and Traffic Route Testing" for testing the international European ISDN,
covering Network Integration Testing (NIT) between ISDN-ISDN, ISDN-PSTN and PSTN-ISDN networks. The
objective is to verify the level of international end-to-end support of ISDN services. Both bearer services (and
associated teleservices) and supplementary services are checked for interworking capability and compatibility, in the
international European ISDN.
The European ISDN is made up by connecting the different national networks and End-to-end NIT covers all the testing
activities necessary to assess the correct behaviour of the interconnected network from the point of view of access
interfaces, network side.
ETSI

---------------------- Page: 7 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
6 ETSI EG 201 299-2 V2.1.1 (2000-03)
1 Scope
The present document specifies the Abstract Test Suite (ATS), the Implementation Conformance Statement (ICS) and
the partial Implementation eXtra Information for TestingTest (IXIT) proformas for the network side of the T reference
point or coincident S and T reference point for the pan-European Integrated Services Digital Network (ISDN) as
provided by European public telecommunications operators by means of the Digital Subscriber Signalling System No.
one (DSS1) protocol, for Network Integration Testing (NIT) covering the end-to-end support of ISDN services.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] ETSI ETS 300 103: "Integrated Services Digital Network (ISDN); Support of CCITT
Recommendation X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by an
ISDN Synchronous and asynchronous terminal adaptation functions".
[3] CCITT Recommendation O.152 (1988): "Error performance measuring equipment for 64 kbit/s
paths".
[4] CCITT Recommendation I.112 (1988): "Vocabulary and terms for ISDNs".
[5] CCITT Recommendation I.210 (1988): "Principles of the telecommunication services supported by
an ISDN and the means to describe them".
[6] CCITT Recommendation E.164 (1988): "Numbering plan for the ISDN era".
[7] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General Concepts".
[8] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite Specification".
[9] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation".
[10] ITU-T Recommendation G.711: "Pulse code modulation (PCM) of voice frequencies".
[11] ITU-T Recommendation H.221: "Frame structure for a 64 to 1920 kbit/s channel in audio-visual
teleservices".
[12] ITU-T Recommendation H.242: "System for establishing communication between audio-visual
terminals using digital channels up to 2 Mbit/s".
[13] ITU-T Recommendation F.721: "Videotelephony teleservice for ISDN".
[14] ITU-T Recommendation F.182: "Guidelines for the support of the communication of documents
using Group 3 facsimile between user terminals via public networks".
ETSI

---------------------- Page: 8 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
7 ETSI EG 201 299-2 V2.1.1 (2000-03)
[15] ISO/IEC 7776: "Information technology - Telecommunications and information exchange between
systems - High-level data link control procedures - Description of the X.25 LAPB-compatible DTE
data link procedures".
[16] ISO/IEC 8208: "Information technology - Data communications - X.25 Packet Layer Protocol for
Data Terminal Equipment".
[17] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements ".
[18] ISO/IEC 9646-4: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 4: Test realization ".
[19] ETSI EN 300 102: "Private Integrated Services Network (PISN); Mapping functions for the
employment of a circuit mode basic service and the supplementary service user-to-user signalling
as a pair of on-demand inter-PINX connections (Mapping/UUS)".
[20] ETSI EN 300 065-1: "Integrated Services Digital Network (ISDN); Completion of Calls on No
Reply (CCNR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[21] ITU-T Recommendation Q.931: "ISDN user-network interface layer 3 specification for basic call
control".
[22] ETSI ETS 300 557: "Digital cellular telecommunications system (Phase 2); Mobile radio interface;
Layer 3 specification (GSM 04.08 version 4.23.1)".
[23] ETSI ETS 300 012: "Integrated Services Digital Network (ISDN); Basic user-network interface;
Layer 1 specification and test principles".
[24] ETSI ETS 300 011: "Integrated Services Digital Network (ISDN); Primary rate user-network
interface; Layer 1 specification and test principles".
[25] ETSI ETS 300 402-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Data link layer; Part 1: General aspects [ITU-T
Recommendation Q.920 (1993), modified]".
[26] ETSI ETS 300 125: "Integrated Services Digital Network (ISDN); User-network interface data
link layer specification; Application of CCITT Recommendations Q.920/I.440 and Q.921/I.441".
[27] ETSI EN 300 356-1: "Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN
User Part (ISUP) version 3 for the international interface; Part 1: Basic services [ITU-T
Recommendations Q.761 to Q.764 (1997), modified]".
[28] ETSI EN 300 267-1: "Integrated Services Digital Network (ISDN); Telephony 7 kHz,
videotelephony, audiographic conference and videoconference teleservices; Digital Subscriber
Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[29] ETSI ETS 300 388: "Integrated Services Digital Network (ISDN); File Transfer, Access and
Management (FTAM) over ISDN based on simple file transfer profile".
[30] ETSI ETS 300 383: "Integrated Services Digital Network (ISDN); File transfer over the ISDN
EUROFILE transfer profile".
[31] ETSI EN 300 092-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[32] ETSI EN 300 093-1: "Integrated Services Digital Network (ISDN); Calling Line Identification
Restriction (CLIR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
ETSI

---------------------- Page: 9 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
8 ETSI EG 201 299-2 V2.1.1 (2000-03)
[33] ETSI EN 300 097-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Presentation (COLP) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[34] ETSI EN 300 098-1: "Integrated Services Digital Network (ISDN); Connected Line Identification
Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[35] ETSI EN 300 138-1: "Integrated Services Digital Network (ISDN); Closed User Group (CUG)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[36] ETSI EN 300 061-1: "Integrated Services Digital Network (ISDN); Subaddressing (SUB)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[37] ETSI EN 300 055-1: "Integrated Services Digital Network (ISDN); Terminal Portability (TP)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[38] ETSI EN 300 286-1: "Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[39] ETSI EN 300 185-1: "Integrated Services Digital Network (ISDN); Conference call, add-on
(CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[40] ETSI EN 300 207-1: "Integrated Services Digital Network (ISDN); Diversion supplementary
services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol
specification".
[41] ETSI EN 300 210-1: "Integrated Services Digital Network (ISDN); Freephone (FPH)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[42] ETSI EN 300 130-1: "Integrated Services Digital Network (ISDN); Malicious Call Identification
(MCID) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 1: Protocol specification".
[43] ETSI EN 300 188-1: "Integrated Services Digital Network (ISDN); Three-Party (3PTY)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[44] ETSI EN 300 141-1: "Integrated Services Digital Network (ISDN); Call Hold (HOLD)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[45] ETSI EN 300 058-1: "Integrated Services Digital Network (ISDN); Call Waiting (CW)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[46] ETSI EN 300 369-1: "Integrated Services Digital Network (ISDN); Explicit Call Transfer (ECT)
supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[47] ETSI EN 300 359-1: "Integrated Services Digital Network (ISDN); Completion of Calls to Busy
Subscriber (CCBS) supplementary service; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[48] ETSI ETR 299-2: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Network Integration Testing (NIT); ISDN end-to-end testing;
Part 2: Implementation Conformance Statement (ICS) proforma, Abstract Test Suite (ATS) and
partial Implementation eXtra Information for Testing (IXIT) proforma specification".
ETSI

---------------------- Page: 10 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
9 ETSI EG 201 299-2 V2.1.1 (2000-03)
3 Definitions
For the purposes of the present document, the following terms and definitions apply:
3.1 Definitions related to conformance testing
Abstract Test Suite: refer to ISO/IEC 9646-1 [7]
Implementation Under Test: refer to ISO/IEC 9646-1 [7]
Lower Tester: refer to ISO/IEC 9646-1 [7]
Implementation Conformance Statement (ICS) proforma: refer to ISO/IEC 9646-1 [7]
Implementation eXtra Information for Testing (IXIT) proforma: refer to ISO/IEC 9646-1 [7]
Point of Control and Observation: refer to ISO/IEC 9646-1 [7]
Protocol Implementation Conformance Statement: refer to ISO/IEC 9646-1 [7]
Protocol Implementation eXtra Information for Testing: refer to ISO/IEC 9646-1 [7]
System Under Test: refer to ISO/IEC 9646-1 [7]
Test Purpose: refer to ISO/IEC 9646-1 [7]
3.2 Definitions related to EN 300 403-1
user: DSS1 protocol entity at the User side of the user-network interface where a T reference point or coincident S and
T reference point applies
user (S/T): DSS1 protocol entity at the User side of the user-network interface where a coincident S and T reference
point applies
user (T): DSS1 protocol entity at the User side of the user-network interface where a T reference point applies (User is
the Private ISDN)
Integrated Services Digital Network (ISDN): see CCITT Recommendation I.112 [4], § 2.2 definition 308
service: telecommunications service: see CCITT Recommendation I.112 [4], § 2.2 definition 201
supplementary service: see CCITT Recommendation I.210 [5], § 2.4
ISDN number: number conforming to the numbering and structure specified in CCITT Recommendation E.164 [6]
3.3 Definitions related to test purpose descriptions
BC = speech: bearer capability information element with its information transfer capability field set to "speech" and its
user information layer one protocol field set to "G.711 [10] A-law"
BC = 3,1 kHz audio: bearer capability information element with its information transfer capability field set to "3,1 kHz
Audio" and its user information layer one protocol field set to "G.711 [10] A-law"
BC = UDI: bearer capability information element with its information transfer capability set to "unrestricted digital
information"
BC = UDI/TA: bearer capability information element with its information transfer capability set to "unrestricted digital
information with tones/announcements" and its user information layer one protocol field set to
"ITU-T Recommendations H.221 [11] and H.242 [12]"
ETSI

---------------------- Page: 11 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
10 ETSI EG 201 299-2 V2.1.1 (2000-03)
BC = ITU-T Recommendation V110 / ITU-T Recommendation X30: a Bearer capability information element with its
information transfer capability set to "unrestricted digital information" and its user information layer 1 field set to
"CCITT standardized rate adaption ITU-T Recommendation V110 / ITU-T Recommendation X30", including
sync/async and user rate values
HLC = telephony: high layer compatibility information element with its high layer characteristics identification field set
to "telephony"
HLC = videotelephony_ic: high layer compatibility information element with its high layer characteristics
identification field set to "videotelephony (Rec. F.721 [13])" and its extended audio-visual characteristics field set to
"capability set of initial channel of Rec. H.221 [11]"
HLC = facsimile group 2/3: high layer compatibility information element with its high layer characteristics
identification field set to "facsimile group 2/3 (Rec. F.182 [14])"
HLC = facsimile group 4: high layer compatibility information element with its high layer characteristics identification
field set to "facsimile group 4 class 1"
HLC = telex: high layer compatibility information element with its high layer characteristics identification field set to
"telex"
LLC = telematic_term: low layer compatibility information element with its user information layer 2 field indicating
"ISO/IEC 7776 [15] operation" and user information layer 3 field indicating "ISO/IEC 8208 [16]"
LLC = voice band data via modem: low layer compatibility information element with its user information layer 1 field
indicating a "modem type" coding
LLC = ITU-T Recommendation V110 / ITU-T Recommendation X30: low layer compatibility information element
with its user information layer 1 field indicating "CCITT standardized rate adaption ITU-T Recommendation V110 /
ITU-T Recommendation X30" and including sync/async and user rate values
telephony 7 kHz fallback not allowed SETUP message: SETUP message containing a single BC = UDI/TA and a
HLC = telephony
videotelephony fallback not allowed SETUP message: SETUP message containing a single BC = UDI/TA and a
single HLC = videotelephony_ic
SI = UPVP: screening Indicator forwarded to the served user coded as "User-provided, verified and passed"
SI = NP: screening Indicator forwarded to the served user coded as "Network provided"
PI = PR: presentation Indicator forwarded to the served user coded as "Presentation restricted".
TON = international: type of number forwarded to the served user coded as "international"
TON = unknown: type of number forwarded to the served user coded as "unknown"
NPI = unknown: numbering plan identification forwarded to the served user coded as "unknown"
CUG default request: calling user does not include in the outgoing SETUP message an explicit request for the CUG
supplementary service
UI length = 32: length of the User information field of the User-user information element is 32 octets.
CF active: call forwarding (U, B or NR) supplementary service is already activated with the address of user C
unavailability period: period of time beginning at the first of 10 consecutive severely erroded seconds and ending
immediately before the first following period of 10 consecutive seconds none of which are severely erroded
erroded second: second with one or more bit errors
severely erroded second: second where at least 0,1% of the bits are erroded (corresponds to a one-second interval with
-3
a bit-error ratio worse than 1x10 )
slip: one or more extra or missing consecutive unit intervals in the bit stream
ETSI

---------------------- Page: 12 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
11 ETSI EG 201 299-2 V2.1.1 (2000-03)
octet slip: slip of one complete octet
Erroded Seconds Ratio: ratio of erroded seconds over all seconds within a specified measuring period, where neither
are counted during unavailability periods
Severely Erroded Seconds: ratio of severely erroded seconds over all seconds within a specified measuring period,
where neither are counted during unavailability periods
11
PRBS = 2 -1: pseudo random binary sequence according to ITU-T Recommendation O.152 [3] transmitted for two
consecutive periods of 24 hours. If an unavailability period of more than one hour occurred during the measuring period,
it shall be extended accordingly
ETSI

---------------------- Page: 13 ----------------------

SIST-V ETSI/EG 201 299-2 V2.1.1:2003
12 ETSI EG 201 299-2 V2.1.1 (2000-03)
4 Abbreviations
For the purposes of the present document, the following abbreviations apply:
3PTY Three-party conference
ATS Abstract Test Suite
BC Bearer capability information element
CD Call deflection
CFB Call forwarding busy
CFNR Call forwarding no response
CFU Call forwarding unconditional
CLIP Calling line identification presentation
CLIR Calling line identification restriction
COLP Connected line identification presentation
COLR Connected line identification restriction
CONF Conference (add-on)
CUG Closed user group
CW Call waiting
ECT Explicit call transfer
ESR Erroded Seconds Ratio
FPH Freephone service
FTAM
...