SIST EN ISP 10607-6:1997

Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File Management Service (ISO/IEC ISP 10607-6:1995)

Migrated from Progress Sheet (TC Comment) (2000-07-10): This WI underwent a parallel enquiry with JTC1.  The // vote was stopped after ++ the DIS bec. JTC1 refused to introduce a confirmation vote (EH, 960401)

Informationstechnik - Internationale Profilnormen AFTnn - Dateiübermittlung, Zugriff und Verwaltung - Teil 6: AFT3 - Management von Dateien (ISO/IEC ISP 10607-6:1995)

Technologies de l'information - Profils normalisés internationaux AFTnn - Transfert, acces et gestion de fichier - Partie 6: AFT3 - Service de gestion de fichier (ISO/IEC ISP 10607-6:1995)

Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File Management Service (ISO/IEC ISP 10607-6:1995)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 30-Sep-2003
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ITC - Information technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Oct-2003
• Due Date: 01-Oct-2003
• Completion Date: 01-Oct-2003
• Mandate: M/053 - Standardization mandate forwarded to CEN, CENELEC and ETSI in the field of Information Technology and Telecommunications concerning the adoption of a set of European standards and execution of related pre-standardization activities as defined in the CEN/EWOS work programme for 1994
• Ref Project: EN ISP 10607-6:1996 - Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File Management Service (ISO/IEC ISP 10607-6:1995)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File Management Service (ISO/IEC ISP 10607-6:1995)Informationstechnik - Internationale Profilnormen AFTnn - Dateiübermittlung, Zugriff und Verwaltung - Teil 6: AFT3 - Management von Dateien (ISO/IEC ISP 10607-6:1995)Technologies de l'information - Profils normalisés internationaux AFTnn - Transfert, acces et gestion de fichier - Partie 6: AFT3 - Service de gestion de fichier (ISO/IEC ISP 10607-6:1995)Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File Management Service (ISO/IEC ISP 10607-6:1995)35.100.05UHãLWYHMultilayer applicationsICS:Ta slovenski standard je istoveten z:EN ISP 10607-6:1996SIST EN ISP 10607-6:1997en01-december-1997SIST EN ISP 10607-6:1997SLOVENSKI
STANDARD



SIST EN ISP 10607-6:1997



SIST EN ISP 10607-6:1997



SIST EN ISP 10607-6:1997



INTERNATIONAL STANDARDIZED PROFILE lSO/lEC ISP 10607-6 Second edition 1995-12-15 Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 - File Management Service Technologies de I’informa tion - Profils normalk& interna tionaux AFTnn - Transfer?, acc& et gestion de fichier - Partie 6: AFT3 - Service de gestion de fichier Reference number ISO/lEC ISP 10607-6:1995(E) SIST EN ISP 10607-6:1997



ISOAEC ISP 10607-6 : 1995 (E) Contents Page Foreword . . Ill Introduction . iv Scope . 1 Normative references . 1 Definitions . 2 Abbreviations . 3 Conformance . 3 Virtual filestore . 3 File protocol . 3 Annexes A Profile Requirements List for ISO/IEC ISP 10607-6 (AFT3). . . . . . q . . . . . 4 B Profile Object identifier . . . . . . . . . . . . . .~.D.~.“. 13 C Corrigenda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~.~.~. 14 D Main differentes between the 1st edition (1991) and the 2nd edition (1995) of this part of ISOIIEC ISP 10607. . . . . . q . ,, . . . . . . . .l 5 0 ISO/IEC 1995 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. ISO/IEC Copyright Office l Gase postale 56 l CH-121 1 Geneve 20 l Switzerland Printed in Switzerland SIST EN ISP 10607-6:1997



0 ISOAEC ISOAEC ISP 10607-6 : 1995 (E) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized System for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental or non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTCI. In addition to developing International Standards, ISO/IEC JTCI has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a Standard or group of Standards, together with Options and Parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least 75 % of the national bodies casting a vote. International Standardized Profile ISO/IEC ISP 10607-6 was prepared with the collaboration of - Asia-Oceania Workshop (AOW); - European Workshop for Open Systems (EWOS); - Open Systems Environment Implementors’ Workshop (OIW). ISO/IEC ISP 10607 consists of the following Parts, under the general title Information technoiogy - International Standardized Profiles A FTnn - File Transfer, Access and Management: - Patt 1: Specification of ACSE, Presentation and Session protocols for the use by FT-AM - Part 2 : Definition of document types, constraint sets and syntaxes - Parf 3 : AFTI 1 - Simple File Transfer Service (unstructured) - Part 4 : AFT12 - Positional File Transfer Service (flat) - Part 5 : A FT22 - Positional File Access Service (fiat) - Part 6 : AFT3 - File Management Service This second edition cancels and replaces the first edition (lSO/lEC ISP 10607-6 : 1991), which has been technically revised. Annexes A and B form an integral patt of this part of ISO/IEC ISP 10607. Annexes C and D are for information only. SIST EN ISP 10607-6:1997



ISO/IEC BSP 10607-6 : 1995 (E) 0 ISOAEC Introcluction This patt of ISO/IEC ISP 10607 is defined within the context of Functional Standardization, in accordance with the principles specified by ISO/IEC TR 10000, ‘6Framework and Taxonomy of International Standardized Profiles”. The context of Functional Standardization is one part of the Overall field of Information Technology (IT) standardization activities, covering base Standards, profiles, and registration mechanisms. A Profile defines a combination of base Standards that collectively perform a specific weil-defined IT function. Profiles standardize the use of Options and other variations in the base Standards, and provide a basis for the development of uniform, internationally recognized System tests. One of the most important roles for an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internationally recognized tests and test centres. ISPs are produced not simply to legitimize a particular choice of base Standards and Options, but to promote real System interoperability. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. The text for this patt of ISO/IEC ISP 10607 was developed in close Co-Operation among the FTAM Expert Groups of the three International OSVOSE Workshops : OSE lmplementors’ Workshop (OIW), the European Workshop for Open Systems (EWOS) and the Asia- Oceania Workshop (AOW). This part of ISO/IEC ISP 10607 is harmonized among these three Workshops and it was finally ratified by the Workshops’ plenary assemblies. SIST EN ISP 10607-6:1997



INTERNATIONAL STANDARDIZED PROFILE 0 lSO/IEC ISO/IEC ISP 10607-6:1995( E) Information technology - International Standardized Profiles AFTnn - File Transfer, Access and Management - Part 6: AFT3 -File Management Service 1 Scope 1 .l General This part of ISO/IEC ISP 10607 (AFT3) covers management of files between the filestores of two end Systems, using the OSI connection-mode transport Service to provide the interconnection. One end System acts in the initiator role and initiates the file management, the other end System acts in the responder role and provides management of the file in the virtual filestore. These role combinations and the interoperability are shown in table 1. Table 1 - Interoperable configurations Initiator Responder Sender Receiver Sender Receiver Initiator Sender Receiver X X Responder Sender Receiver x X This part of ISO/IEC ISP 10607 specifies implernentations that support file management, i.e. the ability to a) create and delete a file, and b) read and Change the attributes of a file. This patt of ISO/IEC ISP 10607 shall be implemented with one or more of ISO/IEC ISP 10607-3, ISO/IEC ISP 10607- 4, ISO/IEC ISP 10607-5. Therefore, this patt of ISO/IEC ISP 10607 specifies only that functionality which is additional to the functionality of the related park. This part of ISO/IEC ISP 10607 specifies how the OSI FTAM application Standard shall be used to provide the functions defined above. lt does not specify total System capability. In particular, a System may operate this Profile and at the Same time engage in other communications. The requirements placed on an implementation in this part of ISO/IEC ISP 10607 are solely those necessary for Operation of the protocol specified. This part of ISO/lEC ISP 10607 describes the actions and attributes of the virtual filestore, and the Service provided by the file Service provider to file Service users, together with the necessary communications between the initiator and the responder. 1.2 Position within the taxonomy This patt of ISO/IEC ISP 10607 is identified in ISO/IEC TR 10000-2 as “AFT3 - File Management Service”. lt may be combined with any T-Profiles (see ISO/IEC TR 10000) specifying the OSI connection-mode transport Service. 1.3 Szenario The model used is one of two end Systems establishing an association and managing files in the responder’s virtual filestore as shown in figure 1. Real Filestore 1 l End End ’ System 1 : System 2 - 1 Filestore - Initiator - - Responder -, 2 Figure 1 - File management between two end Systems Specifications of this part of ISO/IEC ISP 10607 apply on the double lines of figure 1. The mapping between the virtual filestore and the real filestore together with the local data management System is not defined in this patt of ISO/IEC ISP 10607. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this patt of ISO/IEC ISP 10607. At the time of publication, the editions indicated were valid. All documents are subject to revision, and Parties to agreements based on this part of ISO/IEC ISP 10607 are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents is that they may be specific to a particular edition. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs, and ITU-T maintains published editions of its current Recommendations. Corrigenda to the base Standards referenced : See annex C for a complete list of these documents which are identified in this part of ISO/IEC ISP 10607. ISO 8571-1 :1988, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 1 : General introduction. SIST EN ISP 10607-6:1997



ISO/IEC ISP 10607-6 : 1995 (E) 0 ISOAEC ISO 8571-2:1988, Information processing Systems - Open Systems Bn terconnection - File Transfer, Access and Management - Part 2 : Virtual Filestore Definition. ISO 8571-3:1988, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 3 : File Service Definition. ISO 8571-4:1988, Information processing Systems - Open Systems In terconnection - File Transfer, Access and Management - Part 4 : File Protocoi Specification. ISO 8571-4:1988/Amd.4:1992, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 4 : File Protocob Specification - Amendment 4 . ISO/1 EC 8571-5: 1990, Information processing Systems - Open Systems Interconnection - File Transfer, Access and Management - Part 5 : Protocof Impiementation Conformance Statement Proforma. ISO/IEC TR 10000-1 :1992’), Information technology - Framework and taxonomy of International Standardized Profiles - Part 1 : Framework. ISO/1 EC TR 10000-2: 1994l), Information technology - Framework and taxonomy of International Standardized Profiles - Part 2 : Principles and Taxonomy for OS1 Profiles. ISO/IEC ISP 10607-1:1995, Information technology - International Standardized Profiles A FTnn - File Transfer, Access and Management - Part 1 : Specification of A CSE, Presen tation and Session protocols for the use by FTAM. ISO/IEC ISP 10607-2: 1995, Information technology - International Standardized Profiles A FTnn - File Transfer, Access and Management - Part 2 : Definition of document types, constraint sets and syntaxes. ISO/IEC ISP 10607-3: 1995, Information technology - International Standardized Profites AFTnn - File Transfer, Access and Management - Part 3 : AFTI 1 - Simple File Transfer Service (unstructured). ISO/IEC ISP 10607-4: 1995, Information technology - International Standardized Profiles A FTnn - File Transfer, Access and Management - Part 4 : AFT12 - Positional File Transfer Service (ffa t). ISO/1 EC ISP 10607-5: 1995, Information technology - International Standardized Profiles A FTnn - FiJe Transfer, Access and Management - Part 5 : AFT22 - Positional File Access Service (flat). 3 Definitions For the purposes of this patt of ISO/IEC ISP 10607, the following definitions apply. The terms used in this patt of ISOIIEC ISP 10607 are defined in the referenced base Standards. In addition, the following terms are defined. l) Currently under revision. 3.1 General 3.1.1 intervvork : to be able to communicate to satisfy the intent of the initiator. 3.2 Support bei To specify the support level sf protocol features for this part sf lSO/IEC ISP 10607, the following terminology is defined. 32.1 supported; m : Any feature denoted by “m” is mandatory or optional in the base standard. That feature shall be supported, i.e. its Syntax and procedures shall be implemented as specified in the base Standard or in this patt of lSO/IEC BSP 10607 by all implernentations claiming conformance to this patt of lSO/lEC IISP 10607. However, it is not a requirement that the feature shall be used in all instances of communication, unless mandated by the base Standard or stated otherwise in this part of ISO/IEC ISP 10607. For fully supported attributes, this implies that at least the minimum range of attribute values, as defined in ISO 8571-2, shall be supported unless stated otherwise in this part of ISO/IEC ISP 10607. NOTES 1 For features which are optional in the base Standard, conformant implernentations shall be able to interwork with other implernentations not supporting this feature. 2 The support of a feature tan be conditional, depending on the support of a class of fe
...