Hexagon head bolts - Product grades A and B (ISO 4014:1999)

Migrated from Progress Sheet (TC Comment) (2000-07-10): UAP of 4 months because //FV has been missed (Res BT C 243/1999) (CC/991125)

Sechskantschrauben mit Schaft - Produktklassen A und B (ISO 4014:1999)

Diese Internationale Norm legt Eigenschaften von Sechskantschrauben mit Schaft und Gewinden von M 1,6 bis M 64, mit Produktklasse A für Gewinde von M 1,6 bis M 24 und Nennlängen <= 10 d oder 150 mm, wobei der kleinere Zahlenwert gilt, und mit Produktklasse B für Gewinde über M 24 oder Nennlängen > 10 d oder 150 mm, wobei der kleinere Zahlenwert gilt, fest.

Vis a tete hexagonale partiellement filetées - Grades A et B (ISO 4014:1999)

La présente Norme internationale spécifie les caractéristiques des vis à tête hexagonale partiellement filetées de filetage M1,6 à M64 inclus, de grade A pour les filetages M1,6 à M24 inclus et les longueurs nominales l < ou =  10d ou l < ou = 150 mm, selon la valeur la plus petite, et de grade B pour les filetages > M24 ou les longueurs nominales l > 10 d ou l > 150 mm, selon la valeur la plus petite. Si, dans des cas particuliers, des spécifications autres que celles figurant dans la présente Norme internationale sont requises, il est recommandé de les prendre dans les Normes internationales existantes, par exemple ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1, ISO 4753 et ISO 4759-1.

Vijaki s šestrobo glavo - Razreda izdelave A in B (ISO 4014:1999)

General Information

Status
Withdrawn
Publication Date
30-Jun-2002
Withdrawal Date
31-May-2011
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
31-May-2011
Due Date
23-Jun-2011
Completion Date
01-Jun-2011

Relations

Buy Standard

Standard
EN ISO 4014:2002
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vijaki s šestrobo glavo - Razreda izdelave A in B (ISO 4014:1999)Sechskantschrauben mit Schaft - Produktklassen A und B (ISO 4014:1999)Vis a tete hexagonale partiellement filetées - Grades A et B (ISO 4014:1999)Hexagon head bolts - Product grades A and B (ISO 4014:1999)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN ISO 4014:2000SIST EN ISO 4014:2002en01-julij-2002SIST EN ISO 4014:2002SLOVENSKI
STANDARDSIST EN 24014:19961DGRPHãþD



SIST EN ISO 4014:2002



SIST EN ISO 4014:2002



SIST EN ISO 4014:2002



SIST EN ISO 4014:2002



SIST EN ISO 4014:2002



AReference numberISO 4014:1999(E)INTERNATIONALSTANDARDISO4014Third edition1999-09-01Hexagon head bolts — Product grades Aand BVis à tête hexagonale partiellement filetées — Grades A et BSIST EN ISO 4014:2002



ISO 4014:1999(E)©
ISO 1999All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · SwitzerlandInternetiso@iso.chPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.International Standard ISO 4014 was prepared by Technical Committee ISO/TC 2, Fasteners.This third edition cancels and replaces the second edition (ISO 4014:1988) which has been technically revised.SIST EN ISO 4014:2002



© ISOISO 4014:1999(E)iiiIntroductionThis International Standard is part of the complete ISO product standard series on external hexagon drivefasteners. The series comprises:a) hexagon head bolts (ISO 4014 to ISO 4016 and ISO 8765);b) hexagon head screws (ISO 4017, ISO 4018 and ISO 8676);c) hexagon nuts (ISO 4032 to ISO 4036, ISO 8673 to ISO 8675);d) hexagon bolts with flange (ISO 4162 and ISO 15071);e) hexagon nuts with flange (ISO 4161 and ISO 10663);f) structural bolts and nuts (ISO 4775, ISO 7411 to ISO 7414 and ISO 7417).SIST EN ISO 4014:2002



SIST EN ISO 4014:2002



INTERNATIONAL STANDARD
© ISOISO 4014:1999(E)1Hexagon head bolts — Product grades A and B1 ScopeThis International Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to andincluding
M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm,whichever is shorter and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever isshorter.If, in special cases, specifications other than those listed in this International Standard are required, they should beselected from existing International Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1,ISO 4753 and ISO 4759-1.2 Normative referencesThe following normative documents contain provisions which, through reference in this text, constitute provisions ofthis International Standard. For dated references, subsequent amendments to, or revisions of, any of thesepublications do not apply. However, parties to agreements based on this International Standard are encouraged toinvestigate the possibility of applying the most recent editions of the normative documents indicated below. Forundated references, the latest edition of the normative document referred to applies. Members of ISO and IECmaintain registers of currently valid International Standards.ISO 225:1983, Fasteners — Bolts, screws, studs and nuts — Symbols and designations of dimensions.ISO 724:1993, ISO general-purpose metric screw threads — Basic dimensions.ISO 888:1976, Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts.ISO 898-1:1999, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screwsand studs.ISO 965-1:1998, ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data.ISO 3269:—1), Fasteners — Acceptance inspection.ISO 3506-1:1997, Mechanical properties of corrosion-resistant stainless-steel fasteners — Part 1: Bolts, screws andstuds.ISO 4017:1999, Hexagon head screws — Product grades A and B.ISO 4042:1999, Fasteners — Electroplated coatings.ISO 4753:—2), Fasteners — Ends of parts with external metric ISO thread.
1) To be published. (Revision of ISO 3269:1988)2) To be published. (Revisioin of ISO 4753:1983)SIST EN ISO 4014:2002



ISO 4014:1999(E)© ISO2ISO 4759-1:—3), Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C.ISO 6157-1:1988, Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements.ISO 8839:1986, Mechanical properties of fasteners — Bolts, screws, studs and nuts made of non-ferrous metals.ISO 8992:1986, Fasteners — General requirements for bolts, screws, studs and nuts.ISO 10683:—4), Fasteners — Non-electrolytically applied zinc flake coatings.3 DimensionsSee Figure 1 and Tables 1 and 2Symbols and description of dimensions are defined in ISO 225.
3) To be published. (Revision of ISO 4759-1:1978)4) To be published.SIST EN ISO 4014:2002



© ISOISO 4014:1999(E)3Dimensions in millimetresab = 15° to 30°bPoint shall be chamfered or for threads < M4 may be as-rolled (sheared end) (see ISO 4753)cIncomplete thread u < 2PdReferee datum for dweMaximum underhead filletFigure 1SIST EN ISO 4014:2002



ISO 4014:1999(E)© ISO4SIST EN ISO 4014:2002



© ISOISO 4014:1999(E)5SIST EN ISO 4014:2002



ISO 4014:1999(E)© ISO6SIST EN ISO 4014:2002



© ISOISO 4014:1999(E)7SIST EN ISO 4014:2002



ISO 4014:1999(E)© ISO8Table 2 — Non-preferred threadsDimensions in millimetresThread (d)M3,5M14M18M22M27Pa0,622,52,53b1334425060b ref.c1940485666d3253616979cmax.0,400,600,80,8
0,8min.0,150,150,20,2
0,2damax.4,115,720,224,430,4nom.=max.3,5014,0018,0022,0027,00dsProductAmin.3,3213,7317,7321,67—gradeB3,2013,5717,5721,4826,48dwProductAmin.5,0719,6425,3431,71—gradeB4,9519,1524,8531,3538eProductAmin.6,5823,3630,1437,72—gradeB6,4422,7829,5637,2945,2lfmax.13346nom.2,48,811,51417ProductAmax.
2,525
8,9811,71514,215—kgrademin.
2,275
8,6211,28513,785—ProductBmax.2,6
9,0911,8514,3517,35grademin.2,2
8,5111,1513,6516,65kweProductAmin.1,59
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.