iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61120-4:1999

(Main)

Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use -- Part 4: Magnetic tape properties: definitions and methods of measurement

Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use -- Part 4: Magnetic tape properties: definitions and methods of measurement

Applies to methods of measurement for the properties of magnetic tapes used in digital audio reel-to-reel recording and reproducing systems using 6,3 mm magnetic tape for professional use.

Digitales Tonbandgerät Spulensystem mit Magnetband 6,3 mm, für Studioanwendung -- Teil 4: Eigenschaften der Magnetbänder - Begriffe und Meßverfahren

Système d'enregistrement à bande audionumérique, bobine à bobine, utilisant une bande magnétique de 6,3 mm, à usage professionnel -- Partie 4: Propriétés des bandes magnétiques: définitions et méthodes de mesure

S'applique aux méthodes de mesure relatives aux propriétés des bandes magnétiques utilisées dans les systèmes d'enregistrement et de lecture audionumériques, bobine à bobine, utilisant une bande magnétique de 6,3 mm à usage professionnel.

Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use - Part 4: Magnetic tape properties: definitions and methods of measurement (IEC 61120-4:1992)

General Information

Status
Published
Publication Date
30-Jun-1999
ICS
33.160.30 - Audio systems
Technical Committee
AVM - Audio, video and multimedia systems and equipment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-1999
Due Date
01-Jul-1999
Completion Date
01-Jul-1999
Ref Project
EN 61120-4:1992 - Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for professional use - Part 4: Magnetic tape properties: definitions and methods of measurement

Buy Standard

EN 61120-4:1999EN 61120-4:1999
PreviousNext
Standard
EN 61120-4:1999
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61120-4:1999
01-julij-1999
Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for
professional use - Part 4: Magnetic tape properties: definitions and methods of
measurement (IEC 61120-4:1992)
Digital audio tape recorder reel-to-reel system, using 6,3 mm magnetic tape, for
professional use -- Part 4: Magnetic tape properties: definitions and methods of
measurement
Digitales Tonbandgerät Spulensystem mit Magnetband 6,3 mm, für Studioanwendung --
Teil 4: Eigenschaften der Magnetbänder - Begriffe und Meßverfahren
Système d'enregistrement à bande audionumérique, bobine à bobine, utilisant une
bande magnétique de 6,3 mm, à usage professionnel -- Partie 4: Propriétés des bandes
magnétiques: définitions et méthodes de mesure
Ta slovenski standard je istoveten z: EN 61120-4:1992
ICS:
33.160.30 Avdio sistemi Audio systems
SIST EN 61120-4:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61120-4:1999

---------------------- Page: 2 ----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60958-3:2022(Main)
Digital audio interface - Part 3: Consumer applications (IEC 60958-3:2021)
EN IEC 60958-3:2021

This part of IEC 60958 specifies the consumer application of the interface for the inter connection of digital audio equipment defined in IEC 60958-1.
NOTE When used in a consumer digital processing environment, the interface is primarily intended to carry stereophonic programmes, with a resolution of up to 20 bits per sample, an extension to 24 bits per sample being possible.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63087-1:2022(Main)
Assistive listening devices and systems for active assisted living - Part 1: General (IEC 63087-1:2021)
EN IEC 63087-1:2021

This part of IEC 63087 specifies requirements, and the associated methods of measurement,
for the electroacoustic performance of personal listening systems.
This document specifies requirements for the provision of assistive listening in audio, video and
multimedia systems and equipment. The requirements are of different kinds, because of the
diversity of the hardware concerned. Existing IEC standards for methods of measurement are
normatively referenced if they exist. Methods of measurement and performance requirements
are specified in IEC 63087-21.
This document does not apply to hearing aids. Also excluded are devices entirely worn on or in
the ear, which cannot be measured independently.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60958-1:2022(Main)
Digital audio interface - Part 1: General (IEC 60958-1:2021)
EN IEC 60958-1:2021

This part of IEC 60958 describes a serial, uni-directional, self-clocking interface for the
interconnection of digital audio equipment for consumer and professional applications.
It provides the basic structure of the interface. Separate documents define items specific to
particular applications.
The interface is primarily intended to carry monophonic or stereophonic programmes, encoded
using linear PCM and with a resolution of up to 24 bits per sample.
When used for other purposes, the interface is able to carry audio data coded other than as
linear PCM coded audio samples. Provision is also made to allow the interface to carry data
related to computer software, multimedia technologies, or signals coded using non-linear PCM.
The format specification for these applications is not part of this document.
The interface is intended for operation at audio sampling frequencies of 32 kHz and above.
Auxiliary information is transmitted along with the programme.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60958-5:2021(Main)
Digital audio interface - Part 5: Consumer application enhancement (IEC 60958-5:2021)
EN IEC 60958-5:2021

This part of IEC 60958 enhances the consumer application of the interface for the
interconnection of digital audio equipment defined in IEC 60958-1 and IEC 60958-3, introducing:
– multichannel;
– multi-stream;
– high-resolution;
– multimedia extension;
– related applications.
NOTE IEC 60958-3 specifies a consumer application to carry stereophonic programmes with a resolution of up to
24 bits per sample. This part of IEC 60958 enhances the application, allowing programmes with up to 64 channels,
64 bits per sample, and two simultaneous streams.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60268-16:2021(Main)
Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (IEC 60268-16:2020)
EN IEC 60268-16:2020

This part of IEC 60268 defines the STI model, test signals, measurement and prediction
methods.
The objective of this document is to provide a comprehensive manual for all types of users of
the STI model in the fields of audio, communications and acoustics.
This document does not provide STI criteria for certification of transmission channels (e.g.
criteria for a voice-alarm system), but some typical application values are provided in Annex G.
Every measurement method has limitations, and the reader is referred to clauses relating to
limitations such as speech privacy, echo and systems using digital voice compression
(vocoders).
This document does not cover the case of fluctuating noise on the STI, although some general
comments on dealing with this complex issue are provided in 7.13 and 8.9.3.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60268-22:2021(Main)
Sound system equipment - Part 22: Electrical and mechanical measurements on transducers (IEC 60268-22:2020)
EN IEC 60268-22:2020

This part of IEC 60268 applies to transducers converting an electrical input signal into a
mechanical or acoustical output signal. However, if the electrical input terminals and the surface
of the radiator are accessible, this document can also apply to passive and active sound
systems such as loudspeakers, headphones, TV-sets, multi-media devices, personal portable
audio devices, automotive sound systems and professional equipment. This document
describes only electrical and mechanical measurements that help assess the transfer behaviour
of the device under test (DUT). This includes operating the DUT in both the small- and largesignal
domains. The influence of the target application's acoustical boundary conditions (e.g.
car interior) can also be considered in the physical evaluation of the sound system. Perception
and cognitive evaluations of the reproduced sound and the impact of perceived sound quality
are outside the scope of this document.
NOTE This document does not apply to microphones and other sensors. Implementation of this document does not
require access to the sound pressures generated in the near or far fields of the radiator. Directivity and other
characteristics describing the electro-acoustical transfer properties are described in IEC 60268-21, which covers
acoustical measurements.The practical application of the measurements for research and development (R&D), endof-
line testing (QC) and evaluation in the final target application (TA) is discussed in Annex A.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60098:2020(Main)
Analogue audio disk records and reproducing equipment (IEC 60098:2020)
EN IEC 60098:2020

EN-IEC 60089 applies to analogue audio disk records and the corresponding professional anddomestic reproducing equipment. It excludes amplifiers and loudspeakers, methods ofmeasurement for which can be found in IEC 60268-3, IEC 60268-5, IEC 6026821andIEC 60268-221 .This document specifies the characteristics that are necessary to ensure compatibility betweenanalogue audio disk records and the corresponding reproducing equipment.It also lists and defines the most important characteristics affecting the performance ofreproducing equipment, and establishes agreed methods of measurement for thesecharacteristics

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62760:2016/A1:2019(Amendment)
Audio reproduction method for normalized loudness level (TA 20) (IEC 62760:2016/A1:2019)
EN 62760:2016/A1:2019

This International Standard specifies the audio reproduction method for normalized loudness
level of audio sources for consumer equipment and systems.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 63035:2018(Main)
MIDI (Musical Instrument Digital Interface) specification 1.0 (Abridged edition, 2015) (IEC 63035:2017)
EN 63035:2017

This International Standard specifies a hardware and software specification which makes it
possible to exchange symbolic music and control information between different musical
instruments or other devices such as sequencers, computers, lighting controllers, mixers, etc.
using MIDI technology (musical instrument digital interface).

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50849:2018(Main)
Sound systems for emergency purposes
EN 50849:2017

This European Standard specifies the performance requirements for sound systems which are
primarily intended to broadcast information for the protection of lives within one or more specified
areas in an emergency. It also gives the characteristics and the methods of test necessary for the
specification of the system.
This European Standard applies to sound reinforcement and distribution systems to be used to effect
a rapid and orderly mobilization of occupants in an indoor or outdoor area in an emergency, including
systems using loudspeakers to broadcast voice announcements for emergency purposes and
attention-drawing or alarm tone signals.
This European Standard does not apply to emergency sound systems used for evacuation in case of
fire emergency, whether connected to a fire detection and fire alarm system or not.
NOTE 1 The use of the system for normal sound reinforcement and distribution systems purposes under nonhazardous
circumstances is not excluded.
It is recommended that the system, when used for emergency purposes, should form part of a
complete facility (equipment, operating procedures and training programmes) for the control of
emergencies.
NOTE 2 Sound systems for emergency purposes may be the subject of approval by relevant authorities.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day