SIST EN ISP 10613-2:1997

Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 2: LAN subnetwork-dependent, media-independent requirements (ISO/IEC ISP 10613-2:1994)

Technologies de l'information - Profil normalisé international RA - Relais de service de réseau en mode sans connexion - Partie 2: Spécifications indépendantes du milieu, dépendantes du sous-réseau LAN (ISO/IEC ISP 10613-2:1994)

Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 2: LAN subnetwork-dependent, media-independent requirements (ISO/IEC ISP 10613-2:1994)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 30-Sep-2003
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ITC - Information technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Oct-2003
• Due Date: 01-Oct-2003
• Completion Date: 01-Oct-2003
• Ref Project: EN ISP 10613-2:1996 - Information technology - International Standardized Profile RA - Relaying the Connectionless-mode Network Service - Part 2: LAN subnetwork-dependent, media-independent requirements (ISO/IEC ISP 10613-2:1994)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISP 10613-2:1997
01-december-1997
Information technology - International Standardized Profile RA - Relaying the
Connectionless-mode Network Service - Part 2: LAN subnetwork-dependent,
media-independent requirements (ISO/IEC ISP 10613-2:1994)
Information technology - International Standardized Profile RA - Relaying the
Connectionless-mode Network Service - Part 2: LAN subnetwork-dependent, media-
independent requirements (ISO/IEC ISP 10613-2:1994)
Technologies de l'information - Profil normalisé international RA - Relais de service de
réseau en mode sans connexion - Partie 2: Spécifications indépendantes du milieu,
dépendantes du sous-réseau LAN (ISO/IEC ISP 10613-2:1994)
Ta slovenski standard je istoveten z: EN ISP 10613-2:1996
ICS:
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN ISP 10613-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISP 10613-2:1997

---------------------- Page: 2 ----------------------

SIST EN ISP 10613-2:1997

---------------------- Page: 3 ----------------------

SIST EN ISP 10613-2:1997

---------------------- Page: 4 ----------------------

SIST EN ISP 10613-2:1997
INTERNATIONAL ISO/IEC
STANDARDIZED ISP
PROFILE 10613-2
First edition
1994-05-15
Information technology - International
Standardized Profile RA - Relaying the
Connectionless-mode Network Service -
Part 2:
LAN subnetwork-dependent,
media-independent requirements
- Profil normalk international RA -
Technologies de I ’informa tion
Relais de Service de r&eau en mode sans connexion -
Partie 2: Spkifications inddpendan tes du milieu, dbpendantes du
sous-rbseau LAN
Reference number
ISO/IEC ISP 10613~2:1994(E)

---------------------- Page: 5 ----------------------

SIST EN ISP 10613-2:1997
ISO/IEC ISP 10613-2: 1994(E)
Page
Contents
. . .
lll
Foreword .
V
Introduction .
1
1 Scope .
.................................................... 1
2 Normative references
2
3 Definitions .
2
Abbreviations .
4
2
5 Requirements .
2
.......................................................
5.1 Introduction
........................................ 3
5.2 Static Conformance Requirements
...................................... 3
5.3 Dynamit Conformance Requirements
4
.......................................
Annex A ISPICS Requirements List (normative)
4
.......................................................
A.l Introduction
.............................................. 4
A.2 Notation and Conventions
4
A.3 IPRL for ISO 8473 .
5
A.4 IPRL for ISO 9542 .
6
A.5 IPRL for ISO 8802-2 .
7
............................................
Annex B Recommendations (informative)
7
B.l Introduction .
7
B.2 ISO 9542 Recommendations .
0 ISO/IEC 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any
form or by any means, electronie or mechanical, including photocopying and microfilm, without permission in
writing from the publisher.
ISO/IEC Copyright Office l Case postale 56 l CH- 1211 Geneve l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISP 10613-2:1997
0 ISO/IEC ISO/IEC ISP 10613-2: 1994(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized System for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, govemmental and non-govemmental,
in liaison with ISO and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTCl.
In addition to developing International Standards, ISO/IEC JTCl has created a Special Group on Functional
Standardization for the elaboration of International Standardized Profiles.
An International Standardized Profile is an internationally agreed, harmonized document which identifies a
standard or group of Standards, together with Options and Parameters, necessary to accomplish a function or a
set of functions.
Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an
International Standardized Profile requires approval by at least 75 % of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 10613-2 was prepared with the collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implernentors’ Workshop (OIW).
ISO/IEC ISP 10613 consists of several parts, under the general title Information technology - International
Standardized Profile RA - Relaying the Connectionless-mode Network Service:
Part 1: Subnetwork-independent requirements
Part 2: LAN subnetwork-dependent, media-independent requirements
- Part 3: CSMAICD LAN subnetwork-dependent, media-dependent requirements
- Part 4: FDDI LAN subnetwork-dependent, media-dependent requirements
- Part 5: Definition of Profile RA51.51, relaying the Connectionless-mode Network Service between
CSMAICD LAN subnetworks
- Part 6:Definition of Profile RA51.54, relaying the Connectionless-mode Network Service between
CSMAICD LAN subnetworks and FDDI LAN subnetworks
- Part 7: PSDN subnetwork-dependent, media-dependent requirements for virtual calls over a
permanent access
- Part 8: Definition of Profile RA51 .llll, relaying the Connectionless-mode Network Service
between CSMAICD LAN subnetworks and PSDNs using virtual calls over a PSTN leased line
permanent access
. . .
111

---------------------- Page: 7 ----------------------

SIST EN ISP 10613-2:1997
ISO/IEC ISP 10613-2: 1994(E)
0 ISO/IEC
- Part 9: Definition of Profile RA51.1121, relaying the Connectionless-mode Network Service
between CSMAICD LAN subnetworks and PSDNs using virtual calls over a digital data
circuitlCSDN leased line permanent access
Part 10: Token Ring LAN subnetwork-dependent, media-dependent requirements
- Part 11: Definition of Profile RA51.53, relaying the Connectionless-mode Network Service between
CSMAICD LAN subnetworks and Token Ring LAN subnetworks
- Part 12: Definition of Profile RA53.53, relaying the Connectionless-mode Network Service between
Token Ring LAN subnetworks
- Part 13: Definition of Profile RA53.54, relaying the Connectionless-mode Network Service between
Token Ring LAN subnetworks and FDDI LAN subnetworks
- Part 14: Definition of Profile RA54.54, relaying the Connectionless-mode Network Service between
FDDI LAN subnetworks
- Part 15: Definition of Profile RA53.1111, relaying the Connectionless-mode Network Service
between Token Ring LAN subnetworks and PSDNs using virtual calls over a PSTN leased line
permanent access
- Part 16: Definition of Profile RA53.1121, relaying the Connectionless-mode Network Service
between Token Ring LAN subnetworks and PSDNs using virtual calls over a digital data
circuit/CSDN leased line permanent access
- Part 17: Definition of Profile RA54.H 11, relaying the Connectionless-mode Network Service
between FDDI LAN subnetworks and PSDNs using virtual calls over a PSTN leased line
permanent access
- Part 18: Definition of Profile RA54.1121, relaying the Connectionless-mode Network Service
between FDDI LAN subnetworks and PSDNs using virtual calls over a digital data circuit/CSDN
leased line permanent access
Annex A forms an integral part of this part of ISO/IEC ISP 10613. Annex B is for information only.

---------------------- Page: 8 ----------------------

SIST EN ISP 10613-2:1997
0 ISO/IEC
ISO/IEC ISP 10613-2: 1994(E)
Introduction
This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC
Technical Report 10000.
The context of Functional Standardization is one area in the overall field of Information Technology (IT)
standardization activities, covering base Standards, profiles, and registration mechanisms. A Profile defines a
combination of base Standards that collectively perform a specific well-defined IT function. Profiles standardize
the use of Options and other variations in the base Standards, and provide a basis for the development of uniform,
intemationally recognized System tests.
ISPs arc produced not simply to ‘legitimize’ a particular choice of base standards and Options, but to promote
real System interoperability. One of the most important roles for an ISP is to serve as the basis for the
development (by organizations other than ISO and IEC) of intemationally recognized tests. The development and
widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal.
ISO/IEC ISP 10613 consists of several parts of which this is part 2. ISO/IEC ISP 10613-1 specifies the Profile
requirements that are subnetwork-independent. There are further parts which specify subnetwork-dependent and
media-dependent requirements. In addition, for each individual Profile there is a part of ISO/IEC ISP 10613
which identifies the specific requirements of that Profile, making reference to appropriate material from part 1
and from the subnetwork dependent parts of ISO/IEC ISP 10613.

---------------------- Page: 9 ----------------------

SIST EN ISP 10613-2:1997
0 ISO/lEC
ISO/IEC ISP 10613=2:1994(E)
blank page

---------------------- Page: 10 ----------------------

SIST EN ISP 10613-2:1997
INTERNATIONAL STANDARDIZED PROFILE OISO/IEC ISOIIEC ISP 10613-2:1994(3)
Information technology - International Standardized
Profile RA - Relaying the Connectionless-mode Network
Service -
Part 2:
LAN subnetwork-dependent, media-independent requirements
1 Scope
This International Standardized Profile is applicable to interworking units concemed with operating in the Open
Systems Interconnection
...