oSIST prEN ISO 16147:2020
(Main)Standard Details
Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO/FDIS 16147:2020)
Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff-, Öl- und Elektrikbauteile (ISO/FDIS 16147:2020)
Dieses Dokument legt Anforderungen für Konstruktion und Montage von am Motor befestigten Kraftstoff-, Öl- und Elektrikbauteile von Innenbord Dieselmotoren fest, um die Leckage von Kraftstoff, das Risiko eines Stromschlags und das Risiko und/oder die Ausbreitung eines Feuers auf kleinen Wasserfahrzeugen bis zu einer Rumpflänge von 24 m nach ISO 8666 zu minimieren.
Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation, des systèmes de lubrification et des systèmes électriques fixés sur le moteur (ISO/FDIS 16147:2020)
Mala plovila - Vgrajeni dizelski motorji - Nameščene komponente za gorivo, olje in elektriko (ISO/FDIS 16147:2020)
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 16147:2020
01-september-2020
Mala plovila - Vgrajeni dizelski motorji - Nameščene komponente za gorivo, olje in
elektriko (ISO/FDIS 16147:2020)Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components
(ISO/FDIS 16147:2020)Kleine Wasserfahrzeuge - Eingebaute Dieselmotoren - Am Motor befestigte Kraftstoff-,
Öl- und Elektrikbauteile (ISO/FDIS 16147:2020)Petits navires - Moteurs intérieurs diesels - Éléments des circuits d'alimentation, des
systèmes de lubrification et des systèmes électriques fixés sur le moteur (ISO/FDIS
16147:2020)Ta slovenski standard je istoveten z: prEN ISO 16147
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 Čolni Small craft
oSIST prEN ISO 16147:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 16147:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 16147:2020
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 16147
ISO/TC 188
Small craft — Inboard diesel engines
Secretariat: SIS
— Engine-mounted fuel, oil and
Voting begins on:
20200710 electrical components
Voting terminates on:
Petits navires — Moteurs intérieurs diesels — Éléments des circuits
20201002
d'alimentation, des systèmes de lubrification et des systèmes
électriques fixés sur le moteur
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/FDIS 16147:2020(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 16147:2020
ISO/FDIS 16147:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 16147:2020
ISO/FDIS 16147:2020(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ...................................................................................................................................................................................... 1
3 Terms and definitions ..................................................................................................................................................................................... 1
4 General ............................................................................................................................................................................................................................ 2
5 Engine fuel and oil system and components ........................................................................................................................... 2
5.1 General ........................................................................................................................................................................................................... 2
5.2 Highpressure fuel pipes ................................................................................................................................................................ 3
5.3 Lowpressure fuel lines ................................................................................................................................................................... 3
5.4 Fuel and lubrication oil filters .................................................................................................................................................... 3
6 Electrical systems and components.................................................................................................................................................. 3
6.1 General ........................................................................................................................................................................................................... 3
6.2 Cranking motors .................................................................................................................................................................................... 3
6.3 Wiring and connections .................................................................................................................................................................. 4
6.4 Relays, fuse boxes and electronic control modules (ECMs) ............................................................................. 4
7 Installation manual ........................................................................................................................................................................................... 4
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of Directive 2013/53/EU aimed to be covered ..............................................................................5
Bibliography ................................................................................................................................................................................................................................ 6
© ISO 2020 – All rights reserved iii---------------------- Page: 5 ----------------------
oSIST prEN ISO 16147:2020
ISO/FDIS 16147:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 188, Small craft, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 464, Small craft, in
accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This third edition of ISO 16147 cancels and replaces the second edition (ISO 16147:2018), of which it
constitutes a minor revision. The changes compared to the previous edition are as follows:
— clarification in the Scope that the length of hull is as defined in ISO 8666, and reference added in a
new Bibliography;— all references have been dated.
iv © ISO 2020 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 16147:2020
FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 16147:2020(E)
Small craft — Inboard diesel engines — Engine-mounted
fuel, oil and electrical components
1 Scope
This document establishes requirements for the design and installation of engine-mounted fuel, oil and
electrical components on diesel inboardmounted engines for minimizing fuel leakage, risk of electric
shock and the risk of and/or the spread of fire on small craft of hull length up to 24 m in accordance
with ISO 8666.2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7840:2013, Small craft — Fire-resistant fuel hosesISO 10088:2013, Small craft — Permanently installed fuel systems and fixed fuel tanks
ISO 10133:2012, Small craft — Electrical systems — Extra-low-voltage d.c. installations
ISO 13297:2014, Small craft — Electrical systems — Alternating current installations
ISO 25197:2020, Small craft — Electrical/elec...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.