SIST EN 301 486-4 V1.1.1:2005

Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM traffic descriptor modification with negotiation by the connection owner; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

Test spec

Širokopasovno digitalno omrežje z integriranimi storitvami (B-ISDN) – Protokol digitalne naročniške signalizacije št. 2 (DSS2) – Karakteristike zveze – Sprememba prometnega deskriptorja ATM s pogajanjem z lastnikom zveze – 4. del: Abstraktni preskušalni niz (ATS) in delna dodatna informacija za preskušanje izvedbe protokola (PIXIT) – Proforma specifikacija za uporabnika

General Information

• Status: Published
• Publication Date: 31-Dec-2004
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2005
• Due Date: 01-Jan-2005
• Completion Date: 01-Jan-2005
• Ref Project: ETSI EN 301 486-4 V1.1.1 (2002-02) - Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM traffic descriptor modification with negotiation by the connection owner; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM traffic descriptor modification with negotiation by the connection owner; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 486-4 Version 1.1.1SIST EN 301 486-4 V1.1.1:2005en01-januar-2005SIST EN 301 486-4 V1.1.1:2005SLOVENSKI
STANDARD



SIST EN 301 486-4 V1.1.1:2005



ETSI EN 301 486-4 V1.1.1 (2002-02)European Standard (Telecommunications series) Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;Connection characteristics;ATM traffic descriptor modification with negotiationby the connection owner;Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT)proforma specification for the userSIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 2
Reference DEN/SPAN-130202-4 Keywords ATM, ATS, B-ISDN, broadband, DSS2, layer 3, PIXIT, user ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
SIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 3 Contents Intellectual Property Rights.5 Foreword.5 1 Scope.6 2 References.6 3 Definitions and abbreviations.7 3.1 Definitions.7 3.2 Abbreviations.7 4 Abstract Test Method.8 5 Untestable test purposes.8 6 ATS to TP map.8 7 PCTR conformance.8 8 PIXIT conformance.9 9 ATS conformance.9 Annex A (normative): Protocol Conformance Test Report (PCTR) proforma.10 A.1 Identification summary.10 A.1.1 Protocol conformance test report.10 A.1.2 IUT identification.10 A.1.3 Testing environment.10 A.1.4 Limits and reservations.11 A.1.5 Comments.11 A.2 IUT conformance status.11 A.3 Static conformance summary.11 A.4 Dynamic conformance summary.12 A.5 Static conformance review report.12 A.6 Test campaign report.12 A.7 Observations.13 Annex B (normative): Partial PIXIT proforma.14 B.1 Identification summary.14 B.2 Abstract test suite summary.14 B.3 Test laboratory.14 B.4 Client (of the Test Laboratory).15 B.5 SUT.15 B.6 Protocol information.16 B.6.1 Protocol identification.16 B.6.2 Configuration to be tested.16 B.6.3 Test management timers.16 B.6.4 Parameter values.17 Annex C (normative): Abstract Test Suite (ATS).18 C.1 The TTCN Graphical form (TTCN.GR).18 SIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 4 C.2 The TTCN Machine Processable form (TTCN.MP).18 History.19
SIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and Protocols for Advanced Networks (SPAN). The present document is part 4 of a multi-part deliverable covering the Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM traffic descriptor modification with negotiation by the connection owner, as identified below: Part 1: "Protocol specification [ITU-T Recommendation Q.2963.3, modified]"; Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification"; Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user"; Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user"; Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network"; Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network".
National transposition dates Date of adoption of this EN: 1 February 2002 Date of latest announcement of this EN (doa): 31 May 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 November 2002 Date of withdrawal of any conflicting National Standard (dow): 30 November 2002
SIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 6 1 Scope The present document specifies the user Abstract Test Suite (ATS) for the TB reference point or coincident SB and TB reference point (as defined in ITU-T Recommendation I.413 [9]) of implementations conforming to the standards for the signalling user-network layer 3 specification for ATM traffic descriptor modification with negotiation by the connection owner of the Digital Subscriber Signalling System No. two (DSS2) protocol for the pan-European Broadband Integrated Services Digital Network (B-ISDN), EN 301 486-1 [1]. A further part of the present document specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS and partial PIXIT proforma. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the Network side of the TB reference point or coincident SB and TB reference point of implementations conforming to EN 301 486-1 [1]. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. [1] ETSI EN 301 486-1: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM traffic descriptor modification with negotiation by the connection owner; Part 1: Protocol specification [ITU-T Recommendation Q.2963.3, modified]". [2] ETSI EN 301 486-2: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM traffic descriptor modification with negotiation by the connection owner; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification". [3] ETSI EN 301 486-3: "Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM traffic descriptor modification with negotiation by the connection owner; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user". [4] ISO/IEC 9646-1 (1994): "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts". [5] ISO/IEC 9646-2 (1994): "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification". [6] ISO/IEC 9646-3 (1998): "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)". [7] ISO/IEC 9646-4 (1994): "Information technology; Open Systems Interconnection - Conformance testing methodology and framework - Part 4: Test realization". [8] ISO/IEC 9646-5 (1994): "Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the conformance assessment process". [9] ITU-T Recommendation I.413 (1993): "B-ISDN user-network interface". SIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 7 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Abstract Test Suite (ATS): See ISO/IEC 9646-1 [4]. Implementation Under Test (IUT): See ISO/IEC 9646-1 [4]. Lower Tester (LT): See ISO/IEC 9646-1 [4]. Point of Control and Observation (PCO): See ISO/IEC 9646-1 [4]. Protocol Implementation Conformance Statement (PICS): See ISO/IEC 9646-1 [4]. PICS proforma: See ISO/IEC 9646-1 [4]. Protocol Implementation eXtra Information for Testing (PIXIT): See ISO/IEC 9646-1 [4]. PIXIT proforma: See ISO/IEC 9646-1 [4]. System Under Test (SUT): See ISO/IEC 9646-1 [4]. Upper Tester (UT): See ISO/IEC 9646-1 [4]. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATM Abstract Test Method ATS Abstract Test Suite ExTS Executable Test Suite IUT Implementation Under Test LT Lower Tester MOT Means Of Testing PCO Point of Control and Observation PICS Protocol Implementation Conformance Statement PIXIT Protocol Implementation eXtra Information for Testing PTC Parallel Test Component SUT System Under Test TCP Test Co-ordination Procedures TP Test Purpose TTCN Tree and Tabular Combined Notation UT Upper Tester SIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 8 4 Abstract Test Method The remote test method is applied for the user ATS. The Point of Control and Observation (PCO) resides at the service access point between layers 2 and 3. This PCO is named "L0" (for Lower). The L0 PCO is used to control and observe the behaviour of the Implementation Under Test (IUT) and test case verdicts are assigned depending on the behaviour observed at this PCO. Tester
SUT LT
IUT
PCO
Layer 2
Layer 2 Layer 1
Layer 1 Service provider
Figure 1: Remote test method ISO/IEC 9646-2 [5] allows the informal expression of Test Co-ordination Procedures (TCP) between the System Under Test (SUT) upper layer(s) and the Lower Tester (LT). In the ATS contained in annex C, TCP is achieved by use of a second "informal" PCO, called "O" (for Operator). This PCO is used to specify control but not observation above the IUT and consequently, events at this PCO are never used to generate test case verdicts. The use of this O PCO is regarded as a preferred alternative to the use of the implicit send event, in that it allows the ATS to specify in a clear and meaningful way what actions are required to be performed on the IUT. 5 Untestable test purposes There are no untestable test purposes associated with this ATS. 6 ATS to TP map The identifiers used for the TPs (see EN 301 486-3 [3]) are reused as test case names. Thus there is a straightforward one-to-one mapping. 7 PCTR conformance A test laboratory, when requested by a client to produce a PCTR, is required, as specified in ISO/IEC 9646-5 [8], to produce a PCTR conformant with the PCTR template given in annex B of ISO/IEC 9646-5 [8]. Furthermore, a test laboratory, offering testing for the ATS specification contained in annex C, when requested by a client to produce a PCTR, is required to produce a PCTR conformant with the PCTR proforma contained in annex A of the present document. A PCTR which conforms to this PCTR proforma specification shall preserve the content and ordering of the clauses contained in annex A. Clause A.6 of the PCTR may contain additional columns. If included, these shall be placed to the right of the existing columns. Text in italics may be retained by the test laboratory. SIST EN 301 486-4 V1.1.1:2005



ETSI ETSI EN 301 486-4 V1.1.1 (2002-02) 9 8 PIXIT conformance A test realizer, producing an executable test suite for the Abstract Test Suite (ATS) specification contained in annex C, is required, as specified in ISO/IEC 9646-4 [7], to produce an augmented partial PIXIT proforma conformant with this partial PIXIT proforma specification. An augmented partial PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contents which are technically equivalent to annex B. The augmented partial PIXIT proforma may contain additional questions that need to be answered in order to prepare the Means Of Testing (MOT) for a particular Implementation Under Test (IUT). A test laboratory, offering testing for the ATS specification contained in annex C, is required, as specified in ISO/IEC 9646-5 [8], to further augment the augmented partial PIXIT proforma to produce a PIXIT proforma conformant with this partial PIXIT proforma specification. A PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contents which are technically equivalent to annex B. The PIXIT proforma may contain additional questions that need to be answered in order to prepare the test laboratory for a particular IUT. 9 ATS conformance The test realizer, producing a Means Of Testing (MOT) and Executable Test Suite (ExTS) for this Abstract Test Suite (ATS) specification, shall comply with the requirements of ISO/IEC 9646-4 [7]. In particular, these concern the realization of an Executable Test Suite (ExTS) based on each ATS. The test realizer shall provide a statement of conformance of the MOT to this ATS specification. An ExTS which conforms to this ATS specification shall contain test groups and test cases which are technically equivalent to those contained in the ATS in annex C. All sequences of test eve
...