SIST EN 892:2012+A1:2016/kprA2:2021

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods

Bergsteigerausrüstung - Dynamische Bergseile - Sicherheitstechnische Anforderungen und Prüfverfahren

Équipement d'alpinisme et d'escalade - Cordes dynamiques - Exigences de sécurité et méthodes d'essai

Le présent document (EN 892:2012/FprA2:2021) a été élaboré par le comité technique CEN/TC 136 « Équipements et installations pour le sport, les aires de jeux, et autres équipements et installations de loisirs », dont le secrétariat est tenu par DIN.
Le présent document est actuellement soumis au Vote Formel.
Le présent document a été élaboré dans le cadre d'un mandat donné au CEN par la Commission européenne et l'Association européenne de libre-échange, et vient à l'appui des exigences essentielles de la ou des Directives UE.
Pour la relation avec la ou les Directives UE, voir l’Annexe ZA, informative, qui fait partie intégrante du présent document.

Gorniška oprema - Dinamično obremenjene gorniške vrvi - Varnostne zahteve in preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 19-May-2020
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 29-Nov-2021
• Due Date: 04-Dec-2021
• Completion Date: 29-Nov-2021
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: EN 892:2012/FprA2 - Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods

Relations

• Amends: SIST EN 892:2012+A1:2016 - Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
• Effective Date: 01-May-2020
• Consolidated By: SIST EN 892:2012+A2:2022 - Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 892:2012+A2:2022 - Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 892:2012+A2:2022 - Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods
• Effective Date: 01-Jan-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 892:2012+A1:2016/oprA2:2020
01-maj-2020
Gorniška oprema - Dinamično obremenjene gorniške vrvi - Varnostne zahteve in
preskusne metode
Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and
test methods
Bergsteigerausrüstung - Dynamische Bergseile - Sicherheitstechnische Anforderungen
und Prüfverfahren
Équipement d'alpinisme et d'escalade - Cordes dynamiques - Exigences de sécurité et
méthodes d'essai
Ta slovenski standard je istoveten z: EN 892:2012+A1:2016/prA2
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
SIST EN 892:2012+A1:2016/oprA2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 892:2012+A1:2016/oprA2:2020

---------------------- Page: 2 ----------------------
SIST EN 892:2012+A1:2016/oprA2:2020


DRAFT
EUROPEAN STANDARD
EN 892:2012+A1:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
March 2020
ICS 97.220.40
English Version

Mountaineering equipment - Dynamic mountaineering
ropes - Safety requirements and test methods
Équipement d'alpinisme et d'escalade - Cordes Bergsteigerausrüstung - Dynamische Bergseile -
dynamiques - Exigences de sécurité et méthodes Sicherheitstechnische Anforderungen und
d'essai Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 136.

This draft amendment A2, if approved, will modify the European Standard EN 892:2012+A1:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 892:2012+A1:2016/prA2:2020 E
worldwide for CEN n
...