Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters

This document specifies the requirements and test methods for the construction, safety, marking and rational use of energy.
This standard is applicable to types B11, type C11, type C31 and type C91 appliances that burn gas and:
-   are closed-fronted;
-   incorporate a natural draught burner;
-   are connected directly to an open flue or to a device to evacuate the products of combustion (open-flued appliances, balanced-flued appliances);
-   are wall mounted, free-standing or built-in;
-   have a nominal heat input not exceeding 20 kW (based on the net calorific value).
This document is not applicable to:
-   open fronted appliances as specified in EN 13278;
-   decorative fuel effect appliances as specified in EN 509;
-   catalytic combustion appliances;
-   appliances in which the supply of combustion air and/or evacuation of products of combustion is achieved by mechanical means as specified in EN 1266;
-   ducted-air appliances;
-    appliances installed by means of a closure plate (see 3.3.3.3).
Matters related to quality assurance systems, tests during production and to certificates of conformity of auxiliary devices are not dealt with by this standard.

Konvektions-Raumheizer für gasförmige Brennstoffe der Geräte Art B11, Art C11, Art C31 und Art C91

Dieses Dokument legt Anforderungen und Prüfbestimmungen für Bau, Sicherheit, Kennzeichnung und rationelle Energienutzung fest.
Dieses Dokument gilt für gasbeheizte Geräte der Arten B11AS, B11BS, B11CS, C11 und C31 und C91 (siehe Abschnitt 4) und:
− eine geschlossene Vorderseite;
− einen atmosphärischem Brenner;
− direkt oder mittels Zwischenstück an einem Schornstein oder an eine Einrichtung zur Abführung der Abgase angeschlossen sind (schornsteingebundene Geräte, Außenwand-Geräte);
− an der Wand befestigt, freistehend oder eingebaut sind;
− eine Nennwärmeleistung kleiner oder gleich 20 kW (bezogen auf den Heizwert) haben.
Diese Europäische Norm gilt nicht für:
− Geräte mit offener Verbrennungskammer nach EN 13278:2013;
− Geräte mit dekorativem Brennstoffeffekt nach EN 509:1999+A1:2003;
− Geräte mit katalytischer Verbrennung;
− Geräte mit mechanischer Verbrennungsluft zu- und/oder Abgasabführung nach EN 1266:2002;
− Warmlufterzeuger;
− Geräte, die mit einer Verschlussplatte installiert werden (siehe 3.3.3.3).
Fragen im Zusammenhang mit Qualitätssicherung, Kontrollprüfungen während der Produktion und Konformitätszertifikate von Hilfsgeräten werden nicht in dieser Norm behandelt.

Appareils de chauffage indépendants à foyer fermé utilisant les combustibles gazeux de types B11, C11, C31 et C91

Le présent document spécifie les exigences et méthodes d’essais pour la construction, la sécurité, le marquage et l’utilisation rationnelle de l’énergie.
La présente norme s’applique aux appareils de types B11, C11, C31 et C91 utilisant les combustibles gazeux et :
-   à foyer fermé ;
-   comportant un brûleur atmosphérique ;
-   raccordés directement à un conduit ou à un dispositif d’évacuation des produits de combustion (appareils pour conduits à tirage naturel, appareils à ventouse) ;
-   posés, fixés au mur ou encastrés ;
-   ayant un débit calorifique nominal inférieur ou égal à 20 kW (sur le pouvoir calorifique inférieur).
Le présent document ne s’applique pas :
-   aux appareils à foyer ouvert, comme ceux spécifiés dans l’EN 13278 ;
-   aux appareils à effet décoratif, comme ceux spécifiés dans l’EN 509 ;
-   aux appareils à combustion catalytique ;
-   aux appareils dans lesquels l’amenée d’air comburant et/ou l’évacuation des produits de combustion est effectuée par un moyen mécanique comme spécifié dans l’EN 1266 ;
-   aux appareils de distribution d’air par gaine ;
-    aux appareils installés au moyen d’une plaque de fermeture (voir 3.3.3.3).
Les points relatifs aux systèmes d’assurance qualité, aux essais en production et aux certificats de conformité aux équipements auxiliaires ne sont pas traités dans la présente norme.

Plinski grelniki z zaprtim kuriščem tipa B11, C11, C31 in C91

General Information

Status
Not Published
Public Enquiry End Date
06-Aug-2018
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
26-Jan-2021
Due Date
16-Mar-2021
Completion Date
11-Mar-2021

RELATIONS

Buy Standard

Draft
oSIST prEN 613:2018
English language
93 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN 613:2018
01-julij-2018
[Not translated]
Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91
heaters
Konvektions-Raumheizer für gasförmige Brennstoffe

Appareils de chauffage indépendants à foyer fermé utilisant les combustibles gazeux de

types B11, C11, C31 et C91
Ta slovenski standard je istoveten z: prEN 613
ICS:
97.100.20 Plinski grelniki Gas heaters
oSIST prEN 613:2018 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 613:2018
---------------------- Page: 2 ----------------------
oSIST prEN 613:2018
DRAFT
EUROPEAN STANDARD
prEN 613
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2018
ICS 97.100.20 Will supersede EN 613:2000
English Version
Independent closed-fronted gas-fired type B11, type C11,
type C31 and type C91 heaters
Appareils de chauffage indépendants à foyer fermé
utilisant les combustibles gazeux de types B11, C11,
C31 et C91

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 62.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 613:2018 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 613:2018
prEN 613:2018 (E)
Contents Page

European foreword ....................................................................................................................................................... 6

1 Scope .................................................................................................................................................................... 7

2 Normative references .................................................................................................................................... 7

3 Terms and definitions ................................................................................................................................... 8

3.1 Independent gas-fired heaters ................................................................................................................... 8

3.2 Gases .................................................................................................................................................................... 9

3.3 Appliance construction ................................................................................................................................. 9

3.3.1 The gas circuit .................................................................................................................................................. 9

3.3.2 Burner .............................................................................................................................................................. 10

3.3.3 Combustion products circuit.................................................................................................................... 11

3.3.4 Auxiliary equipment ................................................................................................................................... 11

3.4 Appliance performance ............................................................................................................................. 12

3.4.1 Gas rates .......................................................................................................................................................... 12

3.4.2 Gas combustion ............................................................................................................................................. 13

3.5 Marking of the appliance and packaging ............................................................................................. 14

4 Classification of appliances ...................................................................................................................... 14

4.1 Classification according to the nature of the gases used (categories) ...................................... 14

4.1.1 Classification of gases ................................................................................................................................. 14

4.1.2 Appliance categories ................................................................................................................................... 14

4.2 Classification according to the method of evacuation of the products of combustion ....... 15

5 Constructional requirements .................................................................................................................. 16

5.1 General ............................................................................................................................................................. 16

5.1.1 Conversion to different gases .................................................................................................................. 16

5.1.2 Materials and method of construction ................................................................................................. 17

5.1.3 Accessibility for use and maintenance ................................................................................................. 17

5.1.4 Connections .................................................................................................................................................... 18

5.1.5 Soundness of the gas circuit ..................................................................................................................... 18

5.1.6 Soundness of the combustion circuit .................................................................................................... 19

5.1.7 Supply of combustion air and evacuation of combustion products ........................................... 19

5.1.8 Electrical equipment ................................................................................................................................... 20

5.1.9 Safety in the event of fluctuation, interruption and restoration of the auxiliary

energy ............................................................................................................................................................... 20

5.2 Adjusting, control and safety devices ................................................................................................... 21

5.2.1 General ............................................................................................................................................................. 21

5.2.2 Gas rate adjusters ........................................................................................................................................ 21

5.2.3 Aeration adjuster ......................................................................................................................................... 21

5.2.4 Shut-off valves ............................................................................................................................................... 22

5.2.5 Flame supervision devices ........................................................................................................................ 22

5.2.6 Pressure regulators ..................................................................................................................................... 23

5.2.7 Automatic burner control system .......................................................................................................... 23

5.2.8 Thermostats ................................................................................................................................................... 23

5.2.9 Spillage monitoring system ...................................................................................................................... 23

5.2.10 Manually operated devices ....................................................................................................................... 23

5.3 Ignition devices ............................................................................................................................................. 24

5.3.1 Direct ignition of the main burner ......................................................................................................... 24

---------------------- Page: 4 ----------------------
oSIST prEN 613:2018
prEN 613:2018 (E)

5.3.2 Ignition burner .............................................................................................................................................. 24

5.4 Flame supervision systems ....................................................................................................................... 24

5.4.1 General ............................................................................................................................................................. 24

5.4.2 Appliances with automatic burner systems ........................................................................................ 24

5.5 Burners ............................................................................................................................................................. 25

5.6 Gas pressure test points ............................................................................................................................. 25

6 Operational requirements ........................................................................................................................ 25

6.1 General ............................................................................................................................................................. 25

6.2 Soundness of the gas circuit and combustion products circuit, and evacuation of the

combustion products................................................................................................................................... 25

6.2.1 Soundness of the gas circuit ...................................................................................................................... 25

6.2.2 Soundness of the combustion products circuit and evacuation of the combustion

products ........................................................................................................................................................... 25

6.2.3 Escape of unburnt gas (type B appliances only) ............................................................................. 26

6.3 Heat inputs ...................................................................................................................................................... 26

6.3.1 Nominal heat input....................................................................................................................................... 26

6.3.2 Start gas heat input ...................................................................................................................................... 26

6.3.3 Reduces rate ................................................................................................................................................... 26

6.4 Temperature of various parts of the appliance ................................................................................. 27

6.4.1 Temperature of external parts of the appliance ............................................................................... 27

6.4.2 Temperature of components .................................................................................................................... 27

6.4.3 Temperature of floor, shelf and walls ................................................................................................... 27

6.5 Ignition, cross-lighting and flame stability ......................................................................................... 27

6.5.1 Ignition and cross-lighting ........................................................................................................................ 27

6.5.2 Flame stability (all appliances) ............................................................................................................... 28

6.5.3 Fluctuation of the auxiliary energy ........................................................................................................ 28

6.6 Pressure regulators ..................................................................................................................................... 28

6.7 Combustion ..................................................................................................................................................... 28

6.7.1 CO concentration for all appliances ....................................................................................................... 28

6.7.2 Measurement of oxides of nitrogen, NO , (all appliances) ............................................................ 29

6.8 Sooting (live fuel effect gas-fired heaters only) ................................................................................. 29

6.8.1 Cold condition ................................................................................................................................................ 29

6.8.2 Hot condition .................................................................................................................................................. 29

6.8.3 Long cycle condition .................................................................................................................................... 29

6.9 Spillage monitoring system....................................................................................................................... 29

6.9.1 Atmosphere sensing device (type B appliances only) ........................................................... 29

11AS

6.9.2 Combustion products discharge safety device (type B appliances only) ....................... 29

11BS

6.9.3 Type B appliances ............................................................................................................................... 30

11CS

6.10 Flame supervision device .......................................................................................................................... 30

6.10.1 Thermoelectric device ................................................................................................................................ 30

6.10.2 Automatic burner control system ........................................................................................................... 30

6.11 Efficiency .......................................................................................................................................................... 31

7 Test methods .................................................................................................................................................. 31

7.1 General ............................................................................................................................................................. 31

7.1.1 Characteristics of test gases: reference and limit gases ................................................................. 31

7.1.2 Conditions for preparation of the test gases ....................................................................................... 31

7.1.3 Practical application of test gases .......................................................................................................... 31

7.1.4 Test pressures ................................................................................................................................................ 32

7.1.5 General test conditions ............................................................................................................................... 33

7.2 Soundness of the gas circuit and combustion products circuit and evacuation of the

combustion products................................................................................................................................... 34

---------------------- Page: 5 ----------------------
oSIST prEN 613:2018
prEN 613:2018 (E)

7.2.1 Soundness of the gas circuit ..................................................................................................................... 34

7.2.2 Soundness of the combustion products circuit and evacuation of the combustion

products ........................................................................................................................................................... 35

7.2.3 Escape of unburnt gas (type B appliances only) ............................................................................. 36

7.3 Heat inputs ..................................................................................................................................................... 36

7.3.1 Nominal heat input ...................................................................................................................................... 36

7.3.2 Calibrated injector rate of appliance without gas rate adjusters or where these

adjusters are put out of action ................................................................................................................ 37

7.3.3 Performance of gas rate adjusters for ungoverned appliances .................................................. 38

7.3.4 Start gas heat input ...................................................................................................................................... 38

7.3.5 Reduced rate .................................................................................................................................................. 38

7.4 Temperature of various parts of the appliance ................................................................................ 38

7.4.1 General ............................................................................................................................................................. 38

7.4.2 Temperature of external parts of the appliance ............................................................................... 38

7.4.3 Temperature of components ................................................................................................................... 38

7.4.4 Temperature of floor, shelf and walls................................................................................................... 39

7.5 Ignition, cross-lighting and flame stability ......................................................................................... 40

7.5.1 Ignition and cross-lighting ........................................................................................................................ 40

7.5.2 Flame stability ............................................................................................................................................... 41

7.5.3 Effects of room draughts (for type B appliances) .......................................................................... 42

7.5.4 Wind tests for type C C and C appliances ............................................................................. 42

11, 31 91

7.6 Pressure regulators ..................................................................................................................................... 44

7.6.1 Operational pressure regulator .............................................................................................................. 44

7.6.2 Pressure regulator out of service ........................................................................................................... 44

7.7 Combustion .................................................................................................................................................... 45

7.7.1 General ............................................................................................................................................................. 45

7.7.2 Tests under limit conditions .................................................................................................................... 46

7.7.3 Supplementary tests under special conditions ................................................................................. 47

7.7.4 Measurement of oxides of nitrogen (all appliances) ....................................................................... 47

7.8 Sooting (live fuel effect gas-fired heaters only) ................................................................................ 49

7.8.1 General ............................................................................................................................................................. 49

7.8.2 Determination of the smoke number ................................................................................................... 49

7.8.3 Test conditions .............................................................................................................................................. 49

7.9 Spillage monitoring system ...................................................................................................................... 50

7.9.1 General ............................................................................................................................................................. 50

7.9.2 Atmosphere sensing device (type B appliances) .................................................................... 50

11AS

7.9.3 Combustion products discharge safety device (type B appliances) ................................ 51

11BS

7.10 Flame supervision device .......................................................................................................................... 52

7.10.1 Thermoelectric device................................................................................................................................ 52

7.10.2 Automatic burner control systems ........................................................................................................ 52

7.11 Efficiency ......................................................................................................................................................... 53

7.11.1 Installation and gas supply ....................................................................................................................... 53

7.11.2 Determination of efficiency ...................................................................................................................... 53

8 Marking and instructions .......................................................................................................................... 54

8.1 General ............................................................................................................................................................. 54

8.2 Marking ............................................................................................................................................................ 54

8.2.1 Marking of the appliance ........................................................................................................................... 54

8.2.2 Other marking ............................................................................................................................................... 55

8.2.3 Marking of the packaging .......................................................................................................................... 55

8.2.4 Utilization of symbols on the appliance and packaging ................................................................. 56

8.3 Instructions .................................................................................................................................................... 58

---------------------- Page: 6 ----------------------
oSIST prEN 613:2018
prEN 613:2018 (E)

8.3.1 General ............................................................................................................................................................. 58

8.3.2 Instructions for installation, use and servicing and adjustment ................................................. 58

8.3.3 Instructions for use and servicing .......................................................................................................... 60

8.3.4 NOx requirements ........................................................................................................................................ 61

9 Risk Assessment ............................................................................................................................................ 61

Annex A (normative) Spillage test methods ..................................................................................................... 76

A.1 Spillage plate test method ......................................................................................................................... 76

A.1.1 Apparatus ........................................................................................................................................................ 76

A.1.2 Method .............................................................................................................................................................. 76

A.2 Hood test method ......................................................................................................................................... 78

A.2.1 Installation ...................................................................................................................................................... 78

A.2.2 Preliminary adjustment ............................................................................................................................. 78

Annex B (informative) Gas valve arrangements ............................................................................................. 82

Annex C (informative) Gas designations in force in the various EU countries .................................... 83

Annex D (normative) Apparatus for the determination of the smoke number .................................. 85

D.1 Pump ................................................................................................................................................................. 85

D.2 Sampling tube ................................................................................................................................................ 85

D.3 Filter paper ..................................................................................................................................................... 85

D.4 Grey scale ......................................................................................................................................................... 85

Annex E (informative) Symbols and abbreviations ....................................................................................... 86

Annex F (normative) Calculation of conversions of NOx ............................................................................. 87

Annex G (normative) Arrangement for measuring the leakage rate ...................................................... 88

Annex H (normative) Special national conditions ......................................................................................... 89

H.1 General ............................................................................................................................................................. 89

H.2 Belgium............................................................................................................................................................. 89

Annex ZA (informative) Clauses of this European Standard addressing essential

requirements or other provisions of EU Directives ......................................................................... 90

Bibliography ........................................................................................

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.