kSIST FprEN 1744-4:2021
(Main)Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
This document specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture.
A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A.
Prüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 4: Bestimmung der Wasserempfindlichkeit von Füllern in bitumenhaltigen Mischungen
Dieses Dokument legt ein Verfahren für die Bestimmung der Wasserempfindlichkeit von Füllern für bitumenhaltige Mischungen durch Abtrennung von Füllern aus einer bitumenhaltigen Mischung fest.
Ein Verfahren zur Bestimmung der Wasserempfindlichkeit durch Volumenzunahme und Stabilitätsverlust eines Marshall Probekörpers wird in Anhang A beschrieben.
Essais pour déterminer les caractéristiques chimiques des granulats - Partie 4 : Détermination de la sensibilité à l’eau des fillers pour mélanges bitumineux
Le présent document spécifie le mode opératoire pour la détermination de la sensibilité à l’eau des fillers pour mélanges bitumineux, par séparation du filler d’un mélange bitume-filler.
Une méthode de détermination de la sensibilité à l’eau par augmentation de volume et perte de stabilité d’une éprouvette Marshall est décrite à l’Annexe A.
Preskusi kemičnih lastnosti agregatov - 4. del: Ugotavljanje sprejemljivosti vode polnil za bitumenske mešanice
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 1744-4:2020
01-maj-2020
Preskusi kemičnih lastnosti agregatov - 4. del: Ugotavljanje sprejemljivosti vode
polnil za bitumenske mešaniceTests for chemical properties of aggregates - Part 4: Determination of water susceptibility
of fillers for bituminous mixturesPrüfverfahren für chemische Eigenschaften von Gesteinskörnungen - Teil 4:
Bestimmung der Wasserempfindlichkeit von Füllern in bitumenhaltigen Mischungen
Ta slovenski standard je istoveten z: prEN 1744-4
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
oSIST prEN 1744-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 1744-4:2020
---------------------- Page: 2 ----------------------
oSIST prEN 1744-4:2020
DRAFT
EUROPEAN STANDARD
prEN 1744-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2020
ICS 91.100.15 Will supersede EN 1744-4:2005
English Version
Tests for chemical properties of aggregates - Part 4:
Determination of water susceptibility of fillers for
bituminous mixtures
Prüfverfahren für chemische Eigenschaften von
Gesteinskörnungen - Teil 4: Bestimmung der
Wasserempfindlichkeit von Füllern in bitumenhaltigen
Mischungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 154.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1744-4:2020 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 1744-4:2020
prEN 1744-4:2020 (E)
Contents Page
European foreword .......................................................................................................................... 3
1 Scope ....................................................................................................................................... 4
2 Normative references ....................................................................................................... 4
3 Terms and definitions ....................................................................................................... 5
4 Principle ................................................................................................................................. 6
5 Separation of filler from a bitumen filler mixture .................................................. 6
5.1 Reagents ................................................................................................................................. 6
5.2 Apparatus .............................................................................................................................. 6
5.3 Sampling ................................................................................................................................ 8
5.4 Preparation of test portions ........................................................................................... 8
5.5 Procedure .............................................................................................................................. 8
5.6 Calculation and expression of results ......................................................................... 9
5.7 Test report ............................................................................................................................ 9
Annex A (normative) Determination of the volume increase and loss of stability of a
Marshall specimen .......................................................................................................... 10
A.1 General ................................................................................................................................ 10
A.2 Principle .............................................................................................................................. 10
A.3 Materials ............................................................................................................................. 10
A.3.2 Aggregates: ......................................................................................................................... 10
A.4 Apparatus ........................................................................................................................... 10
A.5 Sampling ............................................................................................................................. 11
A.6 Preparation of Marshall specimens .......................................................................... 11
A.7 Procedure ........................................................................................................................... 12
A.8 Calculation and expression of results ...................................................................... 12
A.9 Test report ......................................................................................................................... 13
A.10 Precision ............................................................................................................................. 13
Bibliography .................................................................................................................................... 15
---------------------- Page: 4 ----------------------oSIST prEN 1744-4:2020
prEN 1744-4:2020 (E)
European foreword
This document (prEN 1744-4:2020) has been prepared by Technical Committee CEN/TC 154
“Aggregates”, the secretariat of which is held by BSI.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 1744-4:2005.
The main changes compared to EN 1744-4:2005 are:
— updated normative references;
— clarification of the apparatus described in 5.2;
— clarification of the procedure described in 5.5.
This document forms part of a series of tests for chemical properties of aggregates. Test
methods for other properties of aggregates are covered by Parts of the following European
standards:EN 932, Tests for general properties of aggregates
EN 933, Tests for geometrical properties of aggregates
EN 1097, Tests for mechanical and physical properties of aggregates
EN 1367, Tests for thermal and weathering properties of aggregates
EN 13179, Tests for filler aggregate used in bituminous mixtures
The other parts of EN 1744 are, or will be:
Part 1: Chemical analysis
Part 2: Determination of resistance to alkali/aggregate reaction
Part 3: Preparation of eluates by leaching of aggregates
Part 5: Determination of acid soluble chloride salts
Part 6: Determination of the influence of aggregate extract on the initial setting time of cement
Part 7: Determination of loss on ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA
Aggregate)Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA)
Aggregates---------------------- Page: 5 ----------------------
oSIST prEN 1744-4:2020
prEN 1744-4:2020 (E)
1 Scope
This document specifies the procedure for the determination of the water susceptibility of
fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture.
A method for the determination of water susceptibility by volume increase and loss of stability
of a Marshall specimen is described in Annex A.2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition cited
applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.EN 932-1, Tests for general properties of aggregates — Part 1: Methods for sampling
EN 932-2, Tests for general properties of aggregates — Part 2: Methods for reducing laboratory
samplesEN 932-5, Tests for general properties of aggregates — Part 5: Common equipment and
calibrationEN 933-2, Tests for geometrical properties of aggregates — Part 2: Determination of particle size
distribution — Test sieves, nominal size of aperturesEN 933-3, Tests for geometrical properties of aggregates — Part 3: Determination of particle
shape — Flakiness indexEN 933-4, Tests for geometrical properties of aggregates — Part 4: Determination of particle
shape — Shape indexEN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination
of bulk density of bituminous specimensEN 12697-12, Bituminous mixtures — Test methods — Part 12: Determination of the water
sensitivity of bituminous specimensEN 12697-30, Bituminous mixtures — Test methods — Part 30: Specimen preparation by impact
compactorEN 12697-34, Bituminous mixtures — Test methods — Part 34: Marshall test
EN 12697-35, Bituminous mixtures — Test methods — Part 35: Laboratory mixing
EN 12846-2, Bitumen and bituminous binders — Determination of efflux time by the efflux
viscometer — Part 2: Cut-back and fluxed bituminous binders---------------------- Page: 6 ----------------------
oSIST prEN 1744-4:2020
prEN 1744-4:2020 (E)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1
filler aggregate
aggregate, most of which passes a 0,063 mm sieve, which can be added to construction
materials to provide certain properties3.2
water susceptibility of filler
measure of the degree of separation which occurs in the presence of water from a filler bitumen
mixture, e.g. as a result of intra-crystalline water inclusion between aggregate particles and
binder coating3.3
subsample
sample obtained from sampling increments or a bulk sample by means of a sample reduction
procedure3.4
test portion
sample used as a whole in a single test
3.5
aggregate size
designation of aggregate in terms of lower (d) and upper (D) sieve sizes expressed as d/D
Note 1 to entry: This designation accepts the presence of some particles which will be retained on the
upper sieve (oversize) and some which will pass the lower sieve (undersize).3.6
particle size fraction
fraction of an aggregate passing the larger of two sieves and retained on the smaller
Note 1 to entry: The smaller sieve size can be zero.3.7
constant mass
successive weighings after drying at least 1 h apart not differing by more than 0,1 %, by mass
Note 1 to entry: In many cases constant mass can be achieved after a test portion has been dried for a
pre- determined period in a specified oven at (110 ± 5) °C. Test laboratories can determine the time
required to achieve constant mass for specific types and sizes of sample dependent upon the drying
capacity of the oven used.---------------------- Page: 7 ----------------------
oSIST prEN 1744-4:2020
prEN 1744-4:2020 (E)
4 Principle
A mixture of filler and bitumen is stirred in hot water. If filler becomes separated from the
mixture (indicated by the turbidity of the water), the filler is recovered on a filter paper and
weighed.5 Separation of filler from a bitumen filler mixture
5.1 Reagents
5.1.1 Bit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.