Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures

This document specifies the nominal sizes of apertures for test sieves used for determination of particle size of aggregates.
It applies to
-   test sieves of perforated metal plate having square holes of size from 4 mm and up to 125 mm;
-   test sieves of metal wire cloth having apertures sizes below 4 mm down to 0,063 mm.

Prüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 2: Bestimmung der Korngrößenverteilung - Analysensiebe, Nennweite der Sieböffnungen

Dieses Dokument legt die Nennweiten von Öffnungen für Analysensiebe fest, die zur Bestimmung der Korngröße von Gesteinskörnungen verwendet werden.
Es gilt für:
a)   Analysensiebe aus Lochblech mit quadratischen Öffnungen mit einer Öffnungsweite von 4 mm bis 125 mm;
b)   Analysensiebe aus Metalldrahtgewebe mit einer Öffnungsweite von unter 4 mm bis 0,063 mm.

Essais pour déterminer les caractéristiques géométriques des granulats - Partie 2: Détermination de la granularité - Tamis de contrôle, dimensions nominales des ouvertures

Le présent document spécifie la dimension nominale des ouvertures des tamis de contrôle utilisés pour la détermination de la granulométrie des granulats.
Il s'applique :
a) aux tamis de contrôle en tôles métalliques perforées comportant des trous carrés d’une dimension allant de 4 mm à 125 mm ;
b) aux tamis de contrôle en tissus métalliques comportant des ouvertures d’une dimension inférieure à 4 mm et jusqu’à 0,063 mm.

Preskusi geometričnih lastnosti agregatov - 2. del: Določevanje zrnavosti - Preskusna sita, velikosti nazivnih odprtin

General Information

Status
Published
Public Enquiry End Date
14-May-2019
Publication Date
26-Jul-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Jul-2020
Due Date
18-Sep-2020
Completion Date
27-Jul-2020

RELATIONS

Buy Standard

Standard
SIST EN 933-2:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 933-2:2020
01-september-2020
Nadomešča:
SIST EN 933-2:1999
Preskusi geometričnih lastnosti agregatov - 2. del: Določevanje zrnavosti -
Preskusna sita, velikosti nazivnih odprtin

Tests for geometrical properties of aggregates - Part 2: Determination of particle size

distribution - Test sieves, nominal size of apertures
Prüfverfahren für geometrische Eigenschaften von Gesteinskörnungen - Teil 2:
Bestimmung der Korngrößenverteilung - Analysensiebe, Nennweite der Sieböffnungen

Essais pour déterminer les caractéristiques géométriques des granulats - Partie 2:

Détermination de la granularité - Tamis de contrôle, dimensions nominales des
ouvertures
Ta slovenski standard je istoveten z: EN 933-2:2020
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 933-2:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 933-2:2020
---------------------- Page: 2 ----------------------
SIST EN 933-2:2020
EN 933-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 91.100.15 Supersedes EN 933-2:1995
English Version
Tests for geometrical properties of aggregates - Part 2:
Determination of particle size distribution - Test sieves,
nominal size of apertures

Essais pour déterminer les caractéristiques Prüfverfahren für geometrische Eigenschaften von

géométriques des granulats - Partie 2: Détermination Gesteinskörnungen - Teil 2: Bestimmung der

de la granularité - Tamis de contrôle, dimensions Korngrößenverteilung - Analysensiebe, Nennweite der

nominales des ouvertures Sieböffnungen
This European Standard was approved by CEN on 17 May 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 933-2:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 933-2:2020
EN 933-2:2020 (E)
Contents Page

European foreword ............................................................................................................................................. 3

1 Scope ................................................................................................................................................................ 5

2 Normative references ................................................................................................................................ 5

3 Terms and definitions ............................................................................................................................... 5

4 Requirements for applicable test sieves ............................................................................................. 5

5 Nominal size of apertures for applicable test sieves ...................................................................... 5

Bibliography .......................................................................................................................................................... 7

---------------------- Page: 4 ----------------------
SIST EN 933-2:2020
EN 933-2:2020 (E)
European foreword

This document (EN 933-2:2020) has been prepared by the Technical Committee CEN/TC 154

“Aggregates”, the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by January 2021, and conflicting national standards

shall be withdrawn at the latest by January 2021.

Attention is drawn to the possibility that some of the elements of this document may be the subject

of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN 933-2:1995.

The main technical change compared to EN 933-2:1995 is the addition of Table 1 "Applicable test

sieves – Nominal size of apertures", in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.