Source materials considered in the development of the Aggregate standards of TC 154

This document informs users about the source materials that have been considered in the development of the aggregate standards:
-   EN 12620 'Aggregates for concrete';
-   EN 13043 'Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked are-as';
-   EN 13139 'Aggregates for mortar';
-   EN 13242 'Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction';
-   EN 13383-1 'Armourstone - Part 1: Product standard';
-   EN 13450 'Aggregates for railway ballast';
-   EN 13055 'Lightweight aggregates';
Only source materials with a history of use in one or more member states are included in this document. It also specifies source material with a history of use for the scope of only one specific aggregate standard.

Bei der Erarbeitung der Normen für Gesteinskörnungen des CEN/TC 154 betrachtete Ausgangsstoffe

Dieses Dokument enthält Informationen für Anwender zu den Ausgangsstoffen, die bei der Erarbeitung von Normen für Gesteinskörnungen berücksichtigt wurden:
-   EN 12620 "Gesteinskörnungen für Beton";
-   EN 13043 "Gesteinskörnungen für Asphalt und Oberflächenbehandlungen für Straßen, Flugplätze und andere Verkehrsflächen";
-   EN 13139 "Gesteinskörnungen für Mörtel";
-   EN 13242 "Gesteinskörnungen für ungebundene und hydraulische gebundene Baustoffe für Inge-nieur  und Straßenbau";
-   EN 13383 1 "Wasserbausteine " Teil 1: Anforderungen";
-   EN 13450 "Gesteinskörnungen für Gleisschotter";
-   EN 13055 "Leichte Gesteinskörnungen".
Dieses Dokument enthält nur Ausgangsstoffe mit Erfahrungen hinsichtlich der Anwendbarkeit in einem oder mehreren Mitgliedstaaten. Es legt ebenfalls Ausgangsstoffe mit Erfahrungen hinsichtlich der Anwendbarkeit für den Anwendungsbereich von nur einer bestimmten Norm über Gesteinskörnungen fest.

Matières premières secondaires prises en compte dans l'élaboration des normes granulats du CEN/TC 154

Izvorni materiali, obravnavani pri pripravi standardov tehničnega odbora CEN/TC 154 za agregate

General Information

Status
Published
Public Enquiry End Date
19-Nov-2019
Publication Date
09-Aug-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Jul-2020
Due Date
18-Sep-2020
Completion Date
10-Aug-2020

Buy Standard

Technical specification
SIST-TS CEN/TS 17438:2020
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Technical specification
kSIST-TS FprCEN/TS 17438:2019
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 17438:2020
01-september-2020
Izvorni materiali, obravnavani pri pripravi standardov tehničnega odbora CEN/TC
154 za agregate

Source materials considered in the development of the Aggregate standards of TC 154

Bei der Erarbeitung der Normen für Gesteinskörnungen des CEN/TC 154 betrachtete
Ausgangsstoffe
Ta slovenski standard je istoveten z: CEN/TS 17438:2020
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST-TS CEN/TS 17438:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17438:2020
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
June 2020
TECHNISCHE SPEZIFIKATION
ICS 91.100.15
English Version
Source materials considered in the development of the
Aggregate standards of TC 154

Matières premières secondaires prises en compte dans Bei der Erarbeitung der Normen für

l'élaboration des normes granulats du CEN/TC 154 Gesteinskörnungen des CEN/TC 154 betrachtete

Ausgangsstoffe

This Technical Specification (CEN/TS) was approved by CEN on 29 December 2019 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to

submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS

available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in

parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17438:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms, definitions, symbols and abbreviations ................................................................................... 4

3.1 Terms and definitions ................................................................................................................................... 4

4 Source materials for aggregates ................................................................................................................ 5

4.1 Source materials with a history of use .................................................................................................... 5

4.2 Source materials with identified requirements on additional characteristics ........................ 7

5 Source materials for lightweight aggregates (LWA) ....................................................................... 10

6 Procedure for the incorporation of new source materials ........................................................... 11

7 Descriptions ................................................................................................................................................... 12

Bibliography ................................................................................................................................................................. 17

---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)
European foreword

This document (CEN/TS 17438:2020) has been prepared by Technical Committee CEN/TC 154

“Aggregates”, the secretariat of which is held by BSI.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

CEN/TC 154 intends to keep this document under continual review. Any relevant information to assist in

the updating, including any proposal for the incorporation of new source material types, can be submitted

to the secretariat of CEN/TC 154. The procedure for inclusion of new source materials is described in

Clause 6.

Source materials not described in this document can still be used as an aggregate, but the applicant will

be aware that the relevant standard will not necessarily include all relevant aspects for use.

Due to the dynamic character of this document, no reference from the TC 154 Aggregate standards

towards this document is made with regard to the scope of these standards.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United

Kingdom.
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)
1 Scope

This document informs users about the source materials that have been considered in the development

of the aggregate standards:
— EN 12620, Aggregates for concrete;

— EN 13043, Aggregates for bituminous mixtures and surface treatments for roads, airfields and other

trafficked areas;
— EN 13139, Aggregates for mortar;

— EN 13242, Aggregates for unbound and hydraulically bound materials for use in civil engineering work

and road construction;
— EN 13383-1, Armourstone — Part 1: Product standard;
— EN 13450, Aggregates for railway ballast;
— EN 13055, Lightweight aggregates;

Only source materials with a history of use in one or more member states are included in this document.

It also specifies source materials with a history of use for the scope of only one specific aggregate

standard.
2 Normative references
There are no normative references in this document.
3 Terms, definitions, symbols and abbreviations
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1.1
aggregate

granular material of natural, manufactured or recycled origin used in construction

3.1.2
lightweight aggregate
LWA
3 3

granular material of mineral origin having a particle density not exceeding 2 000 kg/m (2,00 Mg/m ) or

3 3
a loose bulk density not exceeding 1 200 kg/m (1,20 Mg/m )
3.1.3
manufactured aggregates

aggregate of mineral origin resulting from an industrial process involving thermal or other modification

---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)
3.1.4
natural aggregate

aggregate from mineral sources which has been subjected to nothing more than mechanical processing

3.1.5
recycled aggregates

aggregate resulting from the processing of inorganic mineral material previously used in construction

Note 1 to entry: Recycled aggregates can also be obtained from production residues or nonconforming products,

e.g. crushed unused concrete.
4 Source materials for aggregates
4.1 Source materials with a history of use

All source materials which have been considered in the preparation of aggregate standards EN 12620,

EN 13043, EN 13139, EN 13242, EN 13383-1 and EN 13450 are listed in Table 1.

In some member states, there are additional requirements for the use of secondary aggregates. These

additional requirements are summarized in Table 2. It is advised to control all relevant specific

requirements in accordance with requirements at the place of use.

Table 1 — Inventory list with classification codes and status for source materials for aggregates

standards by CEN/TC 154
Sub- Specific EN EN EN EN EN EN
Nr. Source
nmbr material 12620 13043 13139 13242 13383 13450
All
Natural
rock types included
P P Yes Yes Yes Yes Yes Yes
aggregates
in EN 932-3
Reclaimed
A1 No (Yes) No Yes No No
asphalt
Crushed
A2 Yes No No Yes Yes No
concrete
Crushed bricks,
A3 Yes No No Yes No No
Construction
masonry
and
Hydraulically bound
A demolition
and
recycling
A4 Yes No No Yes No No
unbound
industries
materials
Mix of A1, A2, A3
A5 Yes No No Yes No
Yes
and A4
Recycled
A6 Yes Yes No Yes No Yes
railway ballast
Municipal
incinerator
Municipal
bottom ash
solid waste
B B1 Yes Yes No Yes No No
incineration
(excluding fly ash)
industry
(MIBA)
---------------------- Page: 7 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)
Sub- Specific EN EN EN EN EN EN
Nr. Source
nmbr material 12620 13043 13139 13242 13383 13450
Yes
Municipal
(Only as a
B2 incinerator fly ash No No No No No
component
(MIFA)
of compo-
site filler )
C1 Coal fly ash Yes Yes Yes Yes No No
Fluidized bed
C2 combustion fly ash No Yes No Yes No No
(FBCFA)
Coal power
C3 Boiler slag Yes Yes No Yes No No
C generation
industry
C4 Coal bottom ash No No No Yes No No
Fluidized bed
combustion bottom
C5 No No No Yes No No
ash (FBC bottom
ash)
Granulated blast
D1 furnace slag (GBS) Yes No No Yes No No
(vitrified)
Air-cooled blast
D2 furnace slag (ABS) Yes Yes Yes Yes Yes No
(crystallized)
Basic oxygene
furnace slag
D3 Yes Yes No Yes Yes No
(converter slag,
Iron and steel
D BOS)
industry
Electric arc furnace
slag (from carbon
D4 Yes Yes No Yes Yes No
steel production,
EAF C)
Electric arc furnace
slag (from
D5 stainless/high alloy Yes Yes No Yes No No
steel
production, EAF S)
E1 Copper slag Yes Yes No Yes Yes No
E2 Molybdenum slag Yes Yes No Yes No No
E3 Zinc slag Yes No No Yes No No
Non-ferrous
industry
E4 Phosphorus slag No Yes No Yes Yes No
E5 Lead slag Yes No No No Yes No
E6 Ferrochromium slag Yes Yes No Yes No No
F1 Foundry sand Yes Yes No Yes No No
Foundry
Foundry cupola
industry
F2 No Yes No Yes No No
furnace slag
---------------------- Page: 8 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)
Sub- Specific EN EN EN EN EN EN
Nr. Source
nmbr material 12620 13043 13139 13242 13383 13450
G1 Red coal shale No No No Yes No No
Refuse from hard
G2 coal mining (black No No No Yes Yes No
Mining and
coal shale)
G quarry
industry
Pre-selected all-in
G3 No No No Yes No No
from quarry/mining
G4 Spent oil shale No No No Yes No No
Maintenance
H dredging H1 Dredge spoil sand Yes No No Yes No No
works
Yes
(Only as a
I1 Paper sludge ash Yes component No Yes No No
of compo-
site filler )
Yes
Sewage sludge
(Only as a
I2 incineration ash No No Yes No No
component
I Miscellaneous
(municipal)
of compo-
site filler )
Yes
(Only as a
I3 Biomass ash No No Yes No No
component
of compo-
site filler )
I4 Crushed glass Yes Yes No Yes No No

Reclaimed Asphalt is an established component for bituminous mixtures but not an aggregate fitting to the scope of this

specification.
Only A2 and A3.
Requirements on MIBA are based on experience with grated installations.

Filler aggregate of mineral origin, which has been produced using two or more sources in Table 1.

4.2 Source materials with identified requirements on additional characteristics

In situations where the need for additional requirements has been identified by one or more Member

States, this means that these additional requirements are not (yet) included in the relevant standard(s).

This means that these sources are only suitable for its intended use when also the identified

characteristics in that Member State are taken into account before placed on the market as aggregates.

Additional characteristics may be specified on a case by case basis depending upon experience of use of

the product, and defined in specific contractual documents.
---------------------- Page: 9 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)

Table 2 — Source materials with a positive history of use and additional requirements in one or

more Member States
Sub- EN EN EN
Nr. Source Material EN 12620 EN 13043 EN 13242
nmbr 13139 13383 13450
All rock types
Natural
P P included in
aggregates
EN 932-3
Reclaimed
asphalt
Crushed
concrete
Crushed bricks,
Construction A3
masonry
and
Hydraulically
demolition
bound and
recycling
unbound
industries
materials
Mix of A1, A2, A3
and A4
Recycled railway
ballast
Loss on
Loss on
Loss on
ignition or
Municipal
ignition or
ignition or
TOC
incinerator
TOC
TOC
B1 bottom ash Content of
Municipal
Content of
Content of
(excluding fly metals
solid waste
metals
metals
ash) (MIBA) (Soundness)
incineration
(Soundness)
(Soundness)
Swelling
industry
Municipal
B2 incinerator fly
ash (MIFA)
Loss on Loss on
C1 Coal fly ash ignition or ignition or
TOC TOC
Fluidized bed
C2 combustion fly
ash (FBCFA)
Coal power
C3 Boiler slag
C generation
Loss on
industry
C4 Coal bottom ash ignition or
TOC
Fluidized bed
combustion
bottom ash (FBC
bottom ash)
---------------------- Page: 10 ----------------------
SIST-TS CEN/TS 17438:2020
CEN/TS 17438:2020 (E)
Sub- EN EN EN
Nr. Source Material EN 12620 EN 13043 EN 13242
nmbr 13139 13383 13450
Granulated blast
D1 furnace slag
(GBS) (vitrified)
Air-cooled blast
furnace slag Thermal Thermal Thermal
(ABS) conductivity conductivity conductivity
(crystallized)
Basic oxygene
furnace slag Thermal Thermal Thermal
(converter slag, conductivity conductivity conductivity
BOS)
Iron and steel
Electric arc
industry
furnace slag
D4 (from carbon
steel production,
EAF C)
Electric arc
furnace slag
(from
D5 stainless/high
alloy steel
production,
EAF S)
E1 Copper slag
Molybdenum
slag
E3 Zinc slag
Non-ferrous
industry
E4 Phosphorus slag
E5 Lead slag
Ferrochromium
slag
F1 Foundry sand Swelling
Dicalcium Dicalcium
Foundry
Foundry cupola sil
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17438:2019
01-november-2019
Izvorni materiali, obravnavani pri pripravi standardov tehničnega odbora CEN/TC
154 za agregate - Komplementarni element

Source materials considered in the development of the Aggregate standards of TC 154 -

Complementary element
Bei der Erarbeitung der Normen für Gesteinskörnungen des CEN/TC 154 betrachtete
Ausgangsstoffe - Ergänzendes Element
Ta slovenski standard je istoveten z: FprCEN/TS 17438
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
kSIST-TS FprCEN/TS 17438:2019 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 17438:2019
---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17438
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
September 2019
ICS 91.100.15
English Version
Source materials considered in the development of the
Aggregate standards of TC 154 - Complementary element
Bei der Erarbeitung der Normen für
Gesteinskörnungen des CEN/TC 154 betrachtete
Ausgangsstoffe - Ergänzendes Element

This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee

CEN/TC 154.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change

without notice and shall not be referred to as a Technical Specification.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17438:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms, definitions, symbols and abbreviations ................................................................................... 4

3.1 Terms and definitions ................................................................................................................................... 4

3.2 Symbols and abbreviations ......................................................................................................................... 5

4 Source materials for aggregates ................................................................................................................ 5

4.1 Source materials with a history of use .................................................................................................... 5

4.2 Source materials with identified requirements on additional characteristics ........................ 8

5 Source materials for lightweight aggregates (LWA) ....................................................................... 11

6 Procedure for the incorporation of new source materials ........................................................... 13

7 Descriptions ................................................................................................................................................... 13

Bibliography ................................................................................................................................................................. 19

---------------------- Page: 4 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
European foreword

This document (FprCEN/TS 17438:2019) has been prepared by Technical Committee CEN/TC 154

“Aggregates”, the secretariat of which is held by BSI.
This document is currently submitted to the Vote on TS.

This document has been prepared under a mandate given to CEN by the European Commission and the

European Free Trade Association.

CEN/TC 154 intends to keep this document under continual review. Any relevant information to assist in

the updating, including any proposal for the incorporation of new source material types, can be submitted

to the secretariat of CEN/TC 154. The procedure for inclusion of new source materials is described in

Clause 6.

Source materials not described in this document can still be used as an aggregate, but the applicant will

be aware that the relevant standard will not necessarily include all relevant aspects for use.

Due to the dynamic character of this document, no reference from the TC 154 Aggregate standards

towards this document is made with regard to the scope of these standards.
---------------------- Page: 5 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
1 Scope

This document informs users about the source materials that have been considered in the development

of the aggregate standards:
• EN 12620 'Aggregates for concrete';

• EN 13043 'Aggregates for bituminous mixtures and surface treatments for roads, airfields and other

trafficked are-as';
• EN 13139 'Aggregates for mortar';

• EN 13242 'Aggregates for unbound and hydraulically bound materials for use in civil engineering

work and road construction';
• EN 13383-1 'Armourstone — Part 1: Product standard';
• EN 13450 'Aggregates for railway ballast';
• EN 13055 'Lightweight aggregates';

Only source materials with a history of use in one or more member states are included in this document.

It also specifies source material with a history of use for the scope of only one specific aggregate standard.

2 Normative references
There are no normative references in this document.
3 Terms, definitions, symbols and abbreviations
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
aggregate

granular material of natural, manufactured or recycled origin used in construction

3.1.2
lightweight aggregate (LWA)
3 3

granular material of mineral origin having a particle density not exceeding 2 000 kg/m (2,00 Mg/m )

3 3
or a loose bulk density not exceeding 1 200 kg/m (1,20 Mg/m )
3.1.3
manufactured aggregates

aggregate of mineral origin resulting from an industrial process involving thermal or other modification

---------------------- Page: 6 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
3.1.4
natural aggregate

aggregate from mineral sources which has been subjected to nothing more than mechanical processing

3.1.5
recycled aggregates

aggregate resulting from the processing of inorganic mineral material previously used in construction

Note 1 to Entry: Recycled aggregates can also be obtained from production residues or nonconforming products,

e.g. crushed unused concrete
3.2 Symbols and abbreviations
No symbols and abbreviations are used in this document
4 Source materials for aggregates
4.1 Source materials with a history of use

All source materials which have been considered in the preparation of aggregate standards EN 12620,

EN 13043, EN 13139, EN 13242, EN 13383-1 and EN 13450 are listed in Table 1.

In some member states, there are additional requirements for the use of secondary aggregates. These

additional requirements are summarized in Table 2. It is advised to control all relevant specific

requirements in accordance with requirements at the place of use.

Table 1 — Inventory list with classification codes and status for source materials for TC 154

aggregates standards
Sub- Specific EN EN EN EN EN EN
Nr. Source
nmbr material 12620 13043 13139 13242 13383 13450
All
Natural
rock types
P P Yes Yes Yes Yes Yes Yes
included in
aggregates
EN 932–3
Reclaimed
A1 No No Yes No No
(Yes)
asphalt
Crushed
A2 Yes No No Yes Yes No
concrete
Crushed bricks,
A3 Yes No No Yes No No
Constructio
masonry
n and
Hydraulically
A demolition
bound and
recycling
A4 Yes No No Yes No No
unbound
industries
Materials
Mix of A1, A2,
A5 Yes No No Yes No
Yes
A3 and A4
Recycled
A6 Yes Yes No Yes No Yes
Railway Ballast
---------------------- Page: 7 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
Sub- Specific EN EN EN EN EN EN
Nr. Source
nmbr material 12620 13043 13139 13242 13383 13450
Municipal
incinerator
bottom ash
B1 Yes Yes No Yes No No
(excluding fly
Municipal
ash) (MIBA)
solid waste
Yes
incineration
industry
(Only as a
Municipal
component
B2 incinerator fly No No No No No
ash (MIFA)
composite
filler )
C1 Coal fly ash Yes Yes Yes Yes No No
Fluidized bed
C2 combustion fly No Yes No Yes No No
ash (FBCFA)
Coal Power C3 Boiler slag Yes Yes No Yes No No
C generation
C4 Coal bottom ash No No No Yes No No
industry
Fluidized bed
combustion
C5 bottom ash No No No Yes No No
(FBC bottom
ash)
Granulated
blast furnace
D1 Yes No No Yes No No
slag (GBS)
(vitrified)
Air-cooled blast
furnace slag
D2 Yes Yes Yes Yes Yes No
(ABS)
(crystallized)
Basic oxygene
Iron and
furnace slag
D steel
D3 Yes Yes No Yes Yes No
(converter slag,
industry
BOS)
Electric arc
furnace slag
(from carbon
D4 Yes Yes No Yes Yes No
steel
production,
EAF C)
Electric arc
D5 Yes Yes No Yes No No
furnace slag
---------------------- Page: 8 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
Sub- Specific EN EN EN EN EN EN
Nr. Source
nmbr material 12620 13043 13139 13242 13383 13450
(from
stainless/high
alloy steel
production,
EAF S)
E1 Copper slag Yes Yes No Yes Yes No
Molybdenum
E2 Yes Yes No Yes No No
slag
E3 Zinc slag Yes No No Yes No No
Non-ferrous
Phosphorus
industry
E4 No Yes No Yes Yes No
slag
E5 Lead slag Yes No No No Yes No
Ferrochromiu
E6 Yes Yes No Yes No No
m slag
F1 Foundry sand Yes Yes No Yes No No
Foundry
Foundry cupola
industry
F2 No Yes No Yes No No
furnace slag
G1 Red coal shale No No No Yes No No
Refuse from
hard coal
G2 No No No Yes Yes No
mining (black
Mining and
coal shale)
G quarry
industry
Pre-selected
G3 all-in from No No No Yes No No
quarry/mining
G4 Spent oil shale No No No Yes No No
Maintenance
Dredge spoil
H dredging H1 Yes No No Yes No No
sand
works
Yes
(Only as a
component
Paper sludge
I1 Yes No Yes No No
ash
composite
filler )
Miscellaneo
Yes
(Only as a
Sewage sludge
component
I2 incineration No No Yes No No
ash (municipal)
composite
filler )
---------------------- Page: 9 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
Sub- Specific EN EN EN EN EN EN
Nr. Source
nmbr material 12620 13043 13139 13242 13383 13450
Yes
(Only as a
component
I3 Biomass ash No No Yes No No
composite
filler )
I4 Crushed glass Yes Yes No Yes No No

Reclaimed Asphalt is an established component for bituminous mixtures but not an aggregate fitting to the

scope of this specification
Requirements on MIBA are based on experience with grated installations.

Filler aggregate of mineral origin, which has been produced using two or more sources in Table 1.

only A2 and A3
4.2 Source materials with identified requirements on additional characteristics

In situations where the need for additional requirements has been identified by one or more Member

States, this means that these additional requirements are not (yet) included in the relevant standard(s)

and that these sources are only suitable for its intended use when also the identified characteristics in

that Member State are taken into account before placed on the market as aggregates. Additional

characteristics may be specified on a case by case basis depending upon experience of use of the product,

and defined in specific contractual documents.

Table 2 — Source materials with a positive history of use and additional requirements in one or

more Member States
Sub- EN EN EN EN
Nr. Source Material EN 12620 EN 13043
nmbr 13139 13242 13383 13450
Natural All rock types
P aggregat P included in
es EN 932–3
Reclaimed
asphalt
Crushed
Construc
concrete
tion and
Crushed
demoliti
A3 bricks,
masonry
recyclin
g Hydraulically
bound and
industri
unbound
Materials
Mix of A1, A2,
A3 and A4
---------------------- Page: 10 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
Sub- EN EN EN EN
Nr. Source Material EN 12620 EN 13043
nmbr 13139 13242 13383 13450
Recycled
A6 Railway
Ballast
Municipal
incinerator
bottom ash
(A comment
has been
received
Loss on
Loss on
regarding the
Loss on
ignition or
ignition
current test
ignition or
TOC
or TOC
method, in
TOC
Municip
accordance Content of
Content
Content of
al solid
with metals
metals
waste
EN 1744-8, (Soundnes
metals
(Soundnes
incinerat
which is s)
(Sound
ion
characterized
ness)
swelling
industry
as time
consuming,
expensive and
inaccurate.)
(excluding fly
ash) (MIBA)
Municipal
B2 incinerator fly
ash (MIFA)
Loss on Loss on
C1 Coal fly ash ignition or ignition or
TOC TOC
Fluidized bed
combustion
fly ash
Coal
(FBCFA)
power
C3 Boiler slag
C generati
Loss on
Coal bottom
C4 ignition
industry
ash
or TOC
Fluidized bed
combustion
C5 bottom ash
(FBC bottom
ash)
Granulated
Iron and
blast furnace
D steel D1
slag (GBS)
industry
(vitrified)
---------------------- Page: 11 ----------------------
kSIST-TS FprCEN/TS 17438:2019
FprCEN/TS 17438:2019 (E)
Sub- EN EN EN EN
Nr. Source Material EN 12620 EN 13043
nmbr 13139 13242 13383 13450
Air-cooled Therma
Thermal Thermal
blast furnace l
D2 conductivi conductivit
slag (ABS) conduct
ty y
(crystallized) ivity
Basic oxygene Therma
Thermal Thermal
furnace slag l
D3 conductivi conductivit
(converter conduct
ty y
slag, BOS) ivity
Electric arc
furnace slag
(from carbon
steel
production,
EAF C)
Electric arc
furnace slag
(from
stainless/high
alloy steel
production,
EAF S)
E1 Copper slag
Molybdenum
slag
E3 Zinc slag
Non-
E ferrous
Phosphorus
industry
slag
E5 Lead slag
Ferrochromiu
m slag
F1 Foundry sand swelling
Dicalciu
Dicalcium m
Foundry
Foundry silicate and silicate
industry
F2 cupola iron and
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.