SIST-TS TS 101 336 V1.1.1:2004

Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Protocol Implementation Conformance Statement (PICS) proforma specification for Open Settlement Protocol (OSP)

PICS proforma for OSP  PICS for ETSI TS 101 321

Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON) - Proforma specifikacija izjave o skladnosti izvedbe protokola (PICS) za protokol odprtega dogovora (OSP)

General Information

• Status: Published
• Publication Date: 31-Mar-2004
• ICS: 33.020 - Telecommunications in general
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-2004
• Due Date: 01-Apr-2004
• Completion Date: 01-Apr-2004
• Ref Project: ETSI TS 101 336 V1.1.1 (2000-01) - Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Protocol Implementation Conformance Statement (PICS) proforma specification for Open Settlement Protocol (OSP)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS TS 101 336 V1.1.1:2004
01-april-2004
Harmonizacija telekomunikacij in internetnega protokola prek omrežij (TIPHON) -
Proforma specifikacija izjave o skladnosti izvedbe protokola (PICS) za protokol
odprtega dogovora (OSP)
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON);
Protocol Implementation Conformance Statement (PICS) proforma specification for Open
Settlement Protocol (OSP)
Ta slovenski standard je istoveten z: TS 101 336 Version 1.1.1
ICS:
33.020 Telekomunikacije na splošno Telecommunications in
general
SIST-TS TS 101 336 V1.1.1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS TS 101 336 V1.1.1:2004

---------------------- Page: 2 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
ETSI TS 101 336 V1.1.1 (2000-01)
Technical Specification
Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON);
Protocol Implementation Conformance
Statement (PICS) proforma specification
for Open Settlement Protocol (OSP)

---------------------- Page: 3 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
2 ETSI TS 101 336 V1.1.1 (2000-01)
Reference
DTS/TIPHON-06010
Keywords
PICS, testing
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.:[phone] Fax:[phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
Individual copies of this ETSI deliverable
can be downloaded from
http://www.etsi.org
If you find errors in the present document, send your
comment to: [e-mail]
Important notice
This ETSI deliverable may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
3 ETSI TS 101 336 V1.1.1 (2000-01)
Contents
Intellectual Property Rights.5
Foreword .5
Introduction .5
1 Scope.6
2 References.6
3 Definitions and abbreviations .6
3.1 Definitions.6
3.2 Abbreviations .7
4 Conformance to this PICS proforma specification .7
Annex A (normative): PICS proforma for TS 101 321.8
A.1 Guidance for completing the PICS proforma.8
A.1.1 Purposes and structure.8
A.1.2 Abbreviations and conventions.8
A.1.3 Instructions for completing the PICS proforma.10
A.2 Identification of the implementation.10
A.2.1 Date of the statement .11
A.2.2 Implementation Under Test (IUT) identification.11
A.2.3 System Under Test (SUT) identification .11
A.2.4 Product supplier.11
A.2.5 Client (if different from product supplier).12
A.2.6 PICS contact person .12
A.3 PICS/System Conformance Statement (SCS) .13
A.4 Identification of the protocol.13
A.5 Global Statement of Conformance.13
A.6 Roles.13
A.7 Secure Socket Layer / Transport Layer Security Capabilities .14
A.8 Hypertext Transfer Protocol Capabilities .16
A.9 Multipurpose Internet Mail Extensions Capabilities .19
A.10 Extensible Markup Language Capabilities .20
A.11 Root Message Capabilities.20
A.12 Components Supported .21
A.13 PricingIndication Support .22
A.14 PricingConfirmation Support.23
A.15 AuthorisationRequest Support .24
A.16 AuthorisationResponse Support.26
A.17 AuthorisationIndication Support.28
A.18 AuthorisationConfirmation Support .29
A.19 UsageIndication Support.30
A.20 UsageConfirmation Support.31
ETSI

---------------------- Page: 5 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
4 ETSI TS 101 336 V1.1.1 (2000-01)
A.21 ReauthorisationRequest Support.32
A.22 ReauthorisationResponse Support .34
A.23 Authorisation Token Support.36
A.24 XML Extensions .40
History.41
ETSI

---------------------- Page: 6 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
5 ETSI TS 101 336 V1.1.1 (2000-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Project Telecommunications and Internet Protocol
Harmonization Over Networks (TIPHON).
Introduction
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a telecommunication specification. Such a statement is called an Implementation
Conformance Statement (ICS).
ETSI

---------------------- Page: 7 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
6 ETSI TS 101 336 V1.1.1 (2000-01)
1 Scope
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Inter-
domain pricing, authorization and usage exchange defined in TS 101 321 [4] in compliance with the relevant
requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3] and ETS 300 406 [1].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETS 300 406 (1995): "Methods for testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[2] ISO/IEC 9646-1: "Information technology - Open systems interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[3] ISO/IEC 9646-7: "Information technology - Open systems interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[4] TS 101 321 (V1.4): "Telecommunications and Internet Protocol Harmonization Over Networks
(TIPHON); Inter-domain pricing, authorization and usage exchange".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
- terms defined in TS 101 321 [4];
- terms defined in ISO/IEC 9646-1 [2] and in ISO/IEC 9646-7 [3].
In particular, the following terms defined in ISO/IEC 9646-1 [2] apply:
Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system
claimed to conform to a given specification, stating which capabilities have been implemented. The ICS can take several
forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.
ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system
becomes an ICS
Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification
ETSI

---------------------- Page: 8 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
7 ETSI TS 101 336 V1.1.1 (2000-01)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
HTTP HyperTextTransferProtocol
ICS Implementation Conformance Statement
IUT Implementation Under Test
OSP Open Settlement Protocol
PICS Protocol ICS
SCS System Conformance Statement
SSL Secure Socket Layer
SUT System Under Test
TLS Transport Layer Security
4 Conformance to this PICS proforma specification
If it claims to conform to TS 101 321 [4], the actual PICS proforma to be filled in by a supplier shall be technically
equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming and ordering of
the proforma items.
A PICS which conforms to TS 101 321 [4] shall be a conforming PICS proforma completed in accordance with the
guidance for completion given in clause A.1.
ETSI

---------------------- Page: 9 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
8 ETSI TS 101 336 V1.1.1 (2000-01)
Annex A (normative):
PICS proforma for TS 101 321
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Guidance for completing the PICS proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in ETSI Technical Specification TS 101 321 [4] may provide information about the
implementation in a standardized manner.
The PICS proforma is subdivided into subclauses for the following categories of information:
- guidance for completing the PICS proforma;
- identification of the implementation;
- identification of the protocol;
- global statement of conformance;
-roles;
- major capabilities;
- subsidiary capabilities;
- operations;
- arguments, results and errors;
- timers.
A.1.2 Abbreviations and conventions
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [3].
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "is supported by the implementation?".
ETSI

---------------------- Page: 10 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
9 ETSI TS 101 336 V1.1.1 (2000-01)
Status column
The following notations, defined in ISO/IEC 9646-7 [3] , are used for the status column:
m mandatory - the capability is required to be supported;
o optional - the capability may be supported or not;
n/a not applicable - in the given context, it is impossible to use the capability;
x prohibited (excluded) - there is a requirement not to use this capability in the given context;
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer which
identifies a unique group of related optional items and the logic of their selection which is defined
immediately following the table;
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support of
other optional or conditional items. "i" is an integer identifying a unique conditional status
expression which is defined immediately following the table;
i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is
requested from the supplier.
Reference column
The reference column makes reference to TS 101 321 [4], except where explicitly stated otherwise.
Support column
The support column shall be filled in by the supplier of the implementation. The following common notations, defined
in ISO/IEC 9646-7 [3] , are used for the support column:
Y or y supported by the implementation;
N or n not supported by the implementation;
N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional
status).
If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able
to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall
enter the unique reference to a conditional expression, preceded by "?" (e.g. ?3). This expression shall be given in the
space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a
single profile and which takes the value TRUE if and only if that profile is to be used.
EXAMPLE: ?3: IF prof1 THEN Y ELSE N.
It is also possible to provide a comment to an answer in the space provided at the bottom of the table.
NOTE: As stated in ISO/IEC 9646-7 [3] , support for a received PDU requires the ability to parse all valid
parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-
conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported.
Values allowed column
The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations
are used:
- range of values: . :
- example: 5 . 20.
- list of values: , , ., :
example: 2 ,4 ,6 ,8, 9;
ETSI

---------------------- Page: 11 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
10 ETSI TS 101 336 V1.1.1 (2000-01)
example: '1101'B, '1011'B, '1111'B;
example: '0A'H, '34'H, '2F'H.
- list of named values: (), (), ., (:
- example: reject(1), accept(2).
- length: size ( . ):
- example: size (1 . 8).
Values supported column
The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the
ranges of values supported by the implementation shall be indicated.
References to items
For each possible item answer (answer in the support column) within the PICS proforma a unique reference exists, used,
for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character "/",
followed by the item number in the table. If there is more than one support column in a table, the columns are
discriminated by letters (a, b, etc.), respectively.
EXAMPLE 1: A.5/4 is the reference to the answer of item 4 in table 5 of annex A.
EXAMPLE 2: A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in table 6
of annex A.
Prerequisite line
A prerequisite line takes the form: Prerequisite: .
A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be
completed if the predicate is FALSE.
A.1.3 Instructions for completing the PICS proforma
The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an
explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation
described in subclause A.1.2.
If necessary, the supplier may provide additional comments in space at the bottom of the tables, or separately on sheets
of paper.
More detailed instructions are given at the beginning of the different subclauses of the PICS proforma.
A.2 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test
(SUT)) should be filled in so as to provide as much detail as possible regarding version numbers and configuration
options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the contact person.
ETSI

---------------------- Page: 12 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
11 ETSI TS 101 336 V1.1.1 (2000-01)
A.2.1 Date of the statement
...........................................................................................................................................................................
A.2.2 Implementation Under Test (IUT) identification
IUT name:
...........................................................................................................................................................................
...........................................................................................................................................................................
IUT version:
...........................................................................................................................................................................
A.2.3 System Under Test (SUT) identification
SUT name:
...........................................................................................................................................................................
...........................................................................................................................................................................
Hardware configuration:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
Operating system:
...........................................................................................................................................................................
A.2.4 Product supplier
Name:
...........................................................................................................................................................................
Address:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
Telephone number:
...........................................................................................................................................................................
Facsimile number:
...........................................................................................................................................................................
E-mail address:
...........................................................................................................................................................................
ETSI

---------------------- Page: 13 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
12 ETSI TS 101 336 V1.1.1 (2000-01)
Additional information:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
A.2.5 Client (if different from product supplier)
Name:
...........................................................................................................................................................................
Address:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
Telephone number:
...........................................................................................................................................................................
Facsimile number:
...........................................................................................................................................................................
E-mail address:
...........................................................................................................................................................................
Additional information:
...........................................................................................................................................................................
A.2.6 PICS contact person
(A person to contact if there are any queries concerning the content of the PICS)
Name:
...........................................................................................................................................................................
Telephone number:
...........................................................................................................................................................................
Facsimile number:
...........................................................................................................................................................................
E-mail address:
...........................................................................................................................................................................
Additional information:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
ETSI

---------------------- Page: 14 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
13 ETSI TS 101 336 V1.1.1 (2000-01)
A.3 PICS/System Conformance Statement (SCS)
Provide the relationship of the PICS with the SCS for the system:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
A.4 Identification of the protocol
The PICS proforma applies to the following standard.
TS 101 321 (V1.4): "Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON); Inter-
domain pricing, authorization and usage exchange".
A.5 Global Statement of Conformance
Are all mandatory capabilities implemented? (Yes/No).
NOTE: Answering "No" to this question indicates non-conformance to the protocol specification. Non-supported
mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is
non-conforming, on pages attached to the PICS proforma.
A.6 Roles
Table A.1: Roles
Item Role Reference Status Support
Y|N|n/a
R 1 OSP Client o.1
R2 OSPServer o.1
o.1: Support of at least one of these options is required
Comments:
ETSI

---------------------- Page: 15 ----------------------

SIST-TS TS 101 336 V1.1.1:2004
14 ETSI TS 101 336 V1.1.1 (2000-01)
A.7 Secure Socket Layer / Transp
...