iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN 622-2:2004/AC:2006

(Amendment)

Fibreboards - Specifications - Part 2: Requirements for hardboards

Fibreboards - Specifications - Part 2: Requirements for hardboards

TC - Modification to Table 3

Faserplatten - Anforderungen - Teil 2: Anforderungen an harte Platten

Panneaux de fibres - Exigences - Partie 2: Exigences pour panneaux durs

Vlaknene plošče – Specifikacije – 2. del: Zahteve za trde plošče

General Information

Status
Published
Publication Date
30-Apr-2006
ICS
79.060.20 - Fibre and particle boards
Technical Committee
LLZ - Les, lesni izdelki in zaščita lesa
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2006
Due Date
01-May-2006
Completion Date
01-May-2006
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/113 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on wood based panels
Ref Project
EN 622-2:2004/AC:2005 - Fibreboards - Specifications - Part 2: Requirements for hardboards

Relations

Corrects
SIST EN 622-2:2004 - Fibreboards - Specifications - Part 2: Requirements for hardboards
Effective Date
22-Dec-2008
SIST EN 622-2:2004/AC:2006SIST EN 622-2:2004/AC:2006
PreviousNext
Corrigendum
SIST EN 622-2:2004/AC:2006
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2006
9ODNQHQHSORãþH±6SHFLILNDFLMH±GHO=DKWHYH]DWUGHSORãþH
Fibreboards - Specifications - Part 2: Requirements for hardboards
Faserplatten - Anforderungen - Teil 2: Anforderungen an harte Platten
Panneaux de fibres - Exigences - Partie 2: Exigences pour panneaux durs
Ta slovenski standard je istoveten z: EN 622-2:2004/AC:2005
ICS:
79.060.20 9ODNQHQHLQLYHUQHSORãþH Fibre and particle boards
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 622-2:2004/AC
NORME EUROPÉENNE
December 2005
Décembre 2005
EUROPÄISCHE NORM
Dezember 2005
ICS 79.060.20
English version
Version Française
Deutsche Fassung
Fibreboards - Specifications - Part 2: Requirements for hardboards
Panneaux de fibres - Exigences - Partie 2: Faserplatten - Anforderungen - Teil 2:
Exigences pour panneaux durs Anforderungen an harte Platten
This corrigendum becomes effective on 7 December 2005 for incorporation in the three official
language versions of the EN.
Ce corrigendum prendra effet le 7 décembre 2005 pour inc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN 12369-1:2025(Main)
Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards
EN 12369-1:2025

This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995 1 1.
This document includes the characteristic values of both the mechanical properties and density for the panels set out below:
—   OSB/2, OSB/3 and OSB/4, complying with EN 300;
—   Particleboard, P4, P5 P6, P7 complying with EN 312;
—   Hardboard, HB.HLA2 complying with EN 622 2;
—   Medium board, MBH.LA2 complying with EN 622 3;
—   MDF.LA and MDF.HLS complying with EN 622 5;
—   MDF.RWH complying with EN 622 5.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 622-4:2024(Main)
Fibreboards - Specifications - Part 4: Requirements for softboards
EN 622-4:2024

This document specifies the requirements for softboards as defined in EN 316, with a density from 230 kg/ m3 to 400 kg/ m3.
The values listed in this document relate to product properties but they are not characteristic values to be used in design calculations.
NOTE   Panels which are intended for use exclusively as thermal insulating products are covered by EN 13171.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14322:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Definition, requirements and classification
EN 14322:2021

This document specifies the surface requirements and dimensional tolerances for decorative melamine faced boards for interior use which are common for particleboards, extruded particleboards fibreboards and sandwich boards for furniture.
This document is not applicable to boards laminated with so called priming foils or finish foils and laminates according to EN 438-1 and EN 438-2.
This document is not applicable to laminate floor coverings.
Melamine faced wood-based boards in accordance with this document can be referred to as MFB.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14323:2022(Main)
Wood-based panels - Melamine faced boards for interior uses - Test methods
EN 14323:2021

This document specifies test methods for the determination of characteristics of melamine faced boards (MFB) in accordance with EN 14322.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16368:2014(Main)
Lightweight Particleboards - Specifications
CEN/TS 16368:2014

This European Technical Specification specifies the requirements for uncoated particleboards for use in dry conditions in non load-bearing applications with density below 600 kg/m3.
This Technical Specification applies to particleboard which is mostly homogenous and continuous in its composition and which does not contain hollow spaces, chambers or other type of cavities which can be encountered as honeycombs in sandwich panels or as tubes in extruded boards.
This Technical Specification does not give requirements for extruded particleboards (see EN 14755), flaxboards (see EN 15197) and sandwich panels.
NOTE   Typical applications for lightweight boards are in furniture and non-structural applications e.g. in doors, packaging.

  • Technical specification
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 320:2011(Main)
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
EN 320:2011

This European Standard specifies a method for the determination of the resistance of fibreboards and particleboards to axial withdrawal of screws.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 312:2011(Main)
Particleboards - Specifications
EN 312:2010

This European Standard specifies the requirements for flat-pressed or calendar-pressed unfaced particleboards as defined in EN 309.
NOTE 1   This standard is called up in EN 13986 for construction applications. Products specified in this standard are referred to in EN 13986 as resin-bonded particleboards.
The values listed in this standard relate to product properties, but they are not characteristic values to be used in design calculations.
NOTE 2   Such characteristic values (e.g. for use in design calculation in EN 1995-1-1) are given either in EN 12369-1 or derived by testing according to EN 789, EN 1058 and ENV 1156.
Additional information on supplementary properties for certain applications is also given.
NOTE 3   Particleboards in accordance with this standard may be referred to as P1 to P7-boards.
Boards of type P4 to P7 are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN 1995-1-1 and/or performance standards).
This standard does not apply to extruded particleboards and flaxboards, which are standardised in EN 14755 and EN 15197 respectively.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 622-5:2010(Main)
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
EN 622-5:2009

This European Standard specifies the requirements for dry process boards (MDF) as defined in EN 316.
The values listed in this European Standard relate to product properties but they are not characteristic values to be used in design calculations.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 316:2009(Main)
Wood fibre boards - Definition, classification and symbols
EN 316:2009

This European Standard gives the definition, classification and symbols for wood fibreboards.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 634-2:2007(Main)
Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions
EN 634-2:2007

This European Standard for cement-bonded particleboards specifies the requirements for particleboards bonded with Ordinary Portland Cement (OPC) for use in dry, humid ) and external ) conditions. Additional information on supplementary properties for certain applications is also given.
NOTE 1   Boards made with cement other than OPC may comply with this Standard if test values are declared according to EN 13986. However, further parts of EN 634 may be developed in the future to cover other types of cement or other materials.
NOTE 2   Cement-bonded particleboard does not contain any asbestos fibre.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day