Health informatics - Device interoperability - Part 10404: Personal health device communication - Device specialization - Pulse oximeter (ISO/IEEE/FDIS 11073-10404:2022)

ISO/IEEE 11073-10404:2010 establishes a normative definition of communication between personal telehealth pulse oximeter devices and computer engines (e.g., cell phones, personal computers, personal health appliances, set top boxes) in a manner that enables plug-and-play (PnP) interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073 terminology, information models, application profile standards and transport standards. It specifies the use of specific term codes, formats and behaviours in telehealth environments restricting optionality in base frameworks in favour of interoperability.
ISO/IEEE 11073-10404:2010 defines a common core of communication functionality for personal telehealth pulse oximeters and addresses a need for an openly defined, independent standard for controlling information exchange to and from personal health devices and computer engines.

Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit - Teil 10404: Gerätespezifikation - Pulsoximeter (ISO/IEEE/FDIS 11073-10404:2022)

Informatique de santé - Interopérabilité des dispositifs - Partie 10404: Spécialisation des dispositifs - Oxymètre de pouls (ISO/IEEE/FDIS 11073-10404:2022)

L'ISO/IEEE 11073-10404:2010 établit une définition normative de la communication entre des dispositifs d'oxymètres de pouls personnels de télésanté et des moteurs informatiques (par exemple des téléphones cellulaires, des ordinateurs personnels, des équipements personnels de santé et des boîtiers décodeurs) d'une manière qui permet une interopérabilité du type prêt à l'emploi. Elle s'appuie sur les parties appropriées de normes existantes, y compris la terminologie, des modèles d'informations, des normes de profils d'applications et des normes de transport de l'ISO/IEEE 11073. Elle spécifie l'utilisation de codes, de formats et de comportements en termes spécifiques dans les environnements de télésanté, en limitant les choix à des cadres de travail de base en faveur de l'interopérabilité. Elle définit un noyau commun de fonctionnalités de communication pour les oxymètres de pouls personnels de télésanté.
L'ISO/IEEE 11073-10404:2010 répond au besoin d'une norme indépendante définie de manière ouverte portant sur la commande de l'échange d'informations entre des dispositifs personnels de santé et des moteurs informatiques.

Zdravstvena informatika - Interoperabilnost naprav - 10404. del: Komunikacija osebnih medicinskih naprav - Specialne naprave - Pulzni oksimeter (ISO/IEEE/FDIS 11073-10404:2022)

General Information

Status
Not Published
Public Enquiry End Date
15-Sep-2022
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
22-Jun-2022
Due Date
09-Nov-2022

RELATIONS

Buy Standard

Draft
oSIST prEN ISO/IEEE 11073-10404:2022
English language
85 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN ISO/IEEE 11073-10404:2022
01-september-2022
Zdravstvena informatika - Interoperabilnost naprav - 10404. del: Komunikacija
osebnih medicinskih naprav - Specialne naprave - Pulzni oksimeter
(ISO/IEEE/FDIS 11073-10404:2022)

Health informatics - Device interoperability - Part 10404: Personal health device

communication - Device specialization - Pulse oximeter (ISO/IEEE/FDIS 11073-
10404:2022)

Medizinische Informatik - Kommunikation von Geräten für die persönliche Gesundheit -

Teil 10404: Gerätespezifikation - Pulsoximeter (ISO/IEEE/FDIS 11073-10404:2022)

Informatique de santé - Interopérabilité des dispositifs - Partie 10404: Spécialisation des

dispositifs - Oxymètre de pouls (ISO/IEEE/FDIS 11073-10404:2022)
Ta slovenski standard je istoveten z: prEN ISO/IEEE 11073-10404
ICS:
11.040.55 Diagnostična oprema Diagnostic equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
oSIST prEN ISO/IEEE 11073-10404:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-10404
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
2022-06-16
Part 10404:
Voting terminates on:
Personal health device communication
2022-11-03
— Device specialization — Pulse
oximeter
Informatique de santé — Interopérabilité des dispositifs —
Partie 10404: Spécialisation des dispositifs — Oxymètre de pouls
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEEE FDIS 11073-10404:2022(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © IEEE 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE FDIS 11073-10404:2022(E)
FINAL
INTERNATIONAL ISO/IEEE
DRAFT
STANDARD FDIS
11073-10404
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
2022-06-16
Part 10404:
Voting terminates on:
Personal health device communication
2022-11-03
— Device specialization — Pulse
oximeter
Informatique de santé — Interopérabilité des dispositifs —
Partie 10404: Spécialisation des dispositifs — Oxymètre de pouls
COPYRIGHT PROTECTED DOCUMENT
ISO/CEN PARALLEL PROCESSING
© IEEE 2022

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.

RECIPIENTS OF THIS DRAFT ARE INVITED TO
Institute of Electrical and Electronics Engineers, Inc
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
3 Park Avenue, New York
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
NY 10016-5997, USA
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: stds.ipr@ieee.org
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/IEEE FDIS 11073-10404:2022(E)
Website: www.ieee.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
© IEEE 2022 – All rights reserved
NATIONAL REGULATIONS. © IEEE 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE FDIS 11073-10404:2022(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO

collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted (see www.iso.org/directives).

IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating

Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its

standards through a consensus development process, approved by the American National Standards

Institute, which brings together volunteers representing varied viewpoints and interests to achieve the

final product. Volunteers are not necessarily members of the Institute and serve without compensation.

While the IEEE administers the process and establishes rules to promote fairness in the consensus

development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the

information contained in its standards.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any

patent rights identified during the development of the document will be in the Introduction and/or on

the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the World

Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

ISO/IEEE 11073-10404 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in

Medicine and Biology Society (as IEEE Std 11073-10404-2020) and drafted in accordance with its editorial

rules. It was adopted, under the “fast-track procedure” defined in the Partner Standards Development

Organization cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health

informatics.

This second edition cancels and replaces the first edition (ISO/IEEE 11073-10404:2010), which has been

technically revised.

A list of all parts in the ISO/IEEE 11073 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
---------------------- Page: 6 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
IEEE Std 11073-10404™-2020
(Revision of IEEE Std 11073-10404-2008)
Health informatics—Personal health device communication
Part 10404: Device specialization—
Pulse oximeter
Developed by the
IEEE 11073™ Standards Committee
of the
IEEE Engineering in Medicine and Biology Society
Approved 30 January 2020
IEEE SA Standards Board
---------------------- Page: 7 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)

Abstract: Within the context of the ISO/IEEE 11073 family of standards for device

communication, this standard establishes a normative definition of communication between

personal telehealth pulse oximetry devices and compute engines (e.g., cell phones, personal

computers, personal health appliances, set top boxes) in a manner that enables plug-and-play

interoperability. It leverages appropriate portions of existing standards including ISO/IEEE 11073

terminology, information models, application profile standards, and transport standards. It

specifies the use of specific term codes, formats, and behaviors in telehealth environments

restricting optionality in base frameworks in favor of interoperability. This standard defines a

common core of communication functionality for personal telehealth pulse oximeters.

Keywords: IEEE 11073-10404™, medical device communication, personal health devices, PHD,

pulse oximeter
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
Copyright © 2021 by The Institute of Electrical and Electronics Engineers, Inc.

All rights reserved. Published 7 January 2021. Printed in the United States of America.

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics Engineers,

Incorporated.
PDF: ISBN 978-1-5044-6458-1 STD24061
Print: ISBN 978-1-5044-6459-8 STDPD24061
IEEE prohibits discrimination, harassment, and bullying.

For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.

No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission

of the publisher.
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 8 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)
Important Notices and Disclaimers Concerning IEEE Standards Documents

IEEE Standards documents are made available for use subject to important notices and legal disclaimers.

These notices and disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html),

appear in all standards and may be found under the heading “Important Notices and Disclaimers

Concerning IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards
Documents

IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating

Committees of the IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standards

through an accredited consensus development process, which brings together volunteers representing

varied viewpoints and interests to achieve the final product. IEEE Standards are documents developed by

volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers

are not necessarily members of IEEE or IEEE SA, and participate without compensation from IEEE. While

IEEE administers the process and establishes rules to promote fairness in the consensus development

process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information or the

soundness of any judgments contained in its standards.

IEEE makes no warranties or representations concerning its standards, and expressly disclaims all

warranties, express or implied, concerning this standard, including but not limited to the warranties of

merchantability, fitness for a particular purpose and non-infringement. In addition, IEEE does not warrant

or represent that the use of the material contained in its standards is free from patent infringement. IEEE

standards documents are supplied “AS IS” and “WITH ALL FAULTS.”

Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there

are no other ways to produce, test, measure, purchase, market, or provide other goods and services related

to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a standard is approved

and issued is subject to change brought about through developments in the state of the art and comments

received from users of the standard.

In publishing and making its standards available, IEEE is not suggesting or rendering professional or other

services for, or on behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by

any other person or entity to another. Any person utilizing any IEEE Standards document, should rely upon

his or her own independent judgment in the exercise of reasonable care in any given circumstances or, as

appropriate, seek the advice of a competent professional in determining the appropriateness of a given

IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE
NEED TO PROCURE SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND
REGARDLESS OF WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations

The IEEE consensus development process involves the review of documents in English only. In the event

that an IEEE standard is translated, only the English version published by IEEE is the approved IEEE

standard.
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 9 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)
Official statements

A statement, written or oral, that is not processed in accordance with the IEEE SA Standards Board

Operations Manual shall not be considered or inferred to be the official position of IEEE or any of its

committees and shall not be considered to be, nor be relied upon as, a formal position of IEEE. At lectures,

symposia, seminars, or educational courses, an individual presenting information on IEEE standards shall

make it clear that the presenter’s views should be considered the personal views of that individual rather

than the formal position of IEEE, IEEE SA, the Standards Committee, or the Working Group.

Comments on standards

Comments for revision of IEEE Standards documents are welcome from any interested party, regardless of

membership affiliation with IEEE or IEEE SA. However, IEEE does not provide interpretations,

consulting information, or advice pertaining to IEEE Standards documents.

Suggestions for changes in documents should be in the form of a proposed change of text, together with

appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is

important that any responses to comments and questions also receive the concurrence of a balance of interests.

For this reason, IEEE and the members of its Societies and Standards Coordinating Committees are not able to

provide an instant response to comments, or questions except in those cases where the matter has previously been

addressed. For the same reason, IEEE does not respond to interpretation requests. Any person who would like to

participate in evaluating comments or in revisions to an IEEE standard is welcome to join the relevant IEEE

working group. You can indicate interest in a working group using the Interests tab in the Manage Profile &

Interests area of the IEEE SA myProject system. An IEEE Account is needed to access the application.

Comments on standards should be submitted using the Contact Us form.
Laws and regulations

Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with

the provisions of any IEEE Standards document does not constitute compliance to any applicable

regulatory requirements. Implementers of the standard are responsible for observing or referring to the

applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action

that is not in compliance with applicable laws, and these documents may not be construed as doing so.

Data privacy

Users of IEEE Standards documents should evaluate the standards for considerations of data privacy and

data ownership in the context of assessing and using the standards in compliance with applicable laws and

regulations.
Copyrights

IEEE draft and approved standards are copyrighted by IEEE under US and international copyright laws. They

are made available by IEEE and are adopted for a wide variety of both public and private uses. These include

both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the

promotion of engineering practices and methods. By making these documents available for use and adoption

by public authorities and private users, IEEE does not waive any rights in copyright to the documents.

Photocopies

Subject to payment of the appropriate licensing fees, IEEE will grant users a limited, non-exclusive license

to photocopy portions of any individual standard for company or organizational internal use or individual,

non-commercial use only. To arrange for payment of licensing fees, please contact Copyright Clearance

Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400;

https://www.copyright.com/. Permission to photocopy portions of any individual standard for educational

classroom use can also be obtained through the Copyright Clearance Center.
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 10 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)
Updating of IEEE Standards documents

Users of IEEE Standards documents should be aware that these documents may be superseded at any time

by the issuance of new editions or may be amended from time to time through the issuance of amendments,

corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the

document together with any amendments, corrigenda, or errata then in effect.

Every IEEE standard is subjected to review at least every 10 years. When a document is more than 10 years

old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of

some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that

they have the latest edition of any IEEE standard.

In order to determine whether a given document is the current edition and whether it has been amended

through the issuance of amendments, corrigenda, or errata, visit IEEE Xplore or contact IEEE. For more

information about the IEEE SA or IEEE’s standards development process, visit the IEEE SA Website.

Errata

Errata, if any, for all IEEE standards can be accessed on the IEEE SA Website. Search for standard number

and year of approval to access the web page of the published standard. Errata links are located under the

Additional Resources Details section. Errata are also available in IEEE Xplore. Users are encouraged to

periodically check for errata.
Patents
IEEE Standards are developed in compliance with the IEEE SA Patent Policy.

Attention is called to the possibility that implementation of this standard may require use of subject matter

covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to

the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant

has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the

IEEE SA Website at https://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may

indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without

compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of

any unfair discrimination to applicants desiring to obtain such licenses.

Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not

responsible for identifying Essential Patent Claims for which a license may be required, for conducting

inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or

conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing

agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that

determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely

their own responsibility. Further information may be obtained from the IEEE Standards Association.

IMPORTANT NOTICE

IEEE Standards do not guarantee or ensure safety, security, health, or environmental protection, or ensure

against interference with or from other devices or networks. IEEE Standards development activities

consider research and information presented to the standards development group in developing any safety

recommendations. Other information about safety practices, changes in technology or technology

implementation, or impact by peripheral systems also may be pertinent to safety considerations during

implementation of the standard. Implementers and users of IEEE Standards documents are responsible for

determining and complying with all appropriate safety, security, environmental, health, and interference

protection practices and all applicable laws and regulations.
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 11 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)
Participants

At the time this standard was completed, the Personal Health Devices Working Group had the following

membership:
Daidi Zhong, Co-Chair
Michael J. Kirwan, Co-Chair
Karsten Aalders
Chia-Chin Chong Amit Gupta
Charles R. Abbruscato Saeed A. Choudhary Jeff Guttmacher
Nabil Abujbara Jinhan Chung Rasmus Haahr
Maher Abuzaid John A. Cogan Christian Habermann
James Agnew John T. Collins Michael Hagerty
Manfred Aigner Cory Condek Jerry Hahn
Jorge Alberola Todd H. Cooper Robert Hall
David Aparisi David Cornejo Shu Han
Lawrence Arne Douglas Coup Nathaniel Hamming
Diego B. Arquillo Nigel Cox Rickey L. Hampton
Serafin Arroyo Hans Crommenacker Sten Hanke
Muhammad Asim Tomio Crosley Aki Harma
Kit August Allen Curtis Jordan Hartmann
Doug Baird Jesús Daniel Trigo Kai Hassing
David Baker David Davenport Avi Hauser
Anindya Bakshi Wolfgang Heck
Russell Davis
Abira Balanadarasan
Sushil K. Deka Nathaniel Heintzman
Ananth Balasubramanian Ciro de la Vega Charles Henderson
Sunlee Bang Pedro de-las-Heras-Quiros Jun-Ho Her
M. Jonathan Barkley Jim Dello Stritto Helen B. Hernandez
Gilberto Barrón Kent Dicks Timothy L. Hirou
David Bean Hyoungho Do Allen Hobbs
John Bell Jonathan Dougherty Alex Holland
Olivia Bellamou-Huet Xiaolian Duan Arto Holopainen
Rudy Belliardi Sourav Dutta Kris Holtzclaw
Kathryn M. Bennett Jakob Ehrensvard Xinyi Hong
Daniel Bernstein Fredrik Einberg Robert Hoy
George A. Bertos Javier Escayola Calvo Di Hu
Chris Biernacki Mark Estes Anne Huang
Ola Björsne Leonardo Estevez Zhiqiang Huang
Thomas Blackadar Hailing Feng Zhiyong Huang
Marc Blanchet Bosco T. Fernandes Ron Huby
Thomas Bluethner Christoph Fischer
David Hughes
Morten Flintrup
Douglas P. Bogia Robert D. Hughes
Joseph W. Forler
Xavier Boniface Jiyoung Huh
Shannon Boucousis Russell Foster Hugh Hunter
Julius Broma Eric Freudenthal Philip O. Isaacson
Lyle G. Bullock, Jr. Matthias Frohner Atsushi Ito
Bernard Burg Ken Fuchs Michael Jaffe
Chris Burns Jing Gao Praduman Jain
Jeremy Byford-Rew Qi Gao Danny Jochelson
Satya Calloji Marcus Garbe Akiyoshi Kabe
Xiaoying Cao John Garguilo Steve Kahle
Carole C. Carey Rick Geimer Tomio Kamioka
Craig Carlson Igor Gejdos James J. Kang
Santiago Carot-Nemesio Ferenc Gerbovics Kei Kariya
Randy W. Carroll Alan Godfrey Andy Kaschl
Simon Carter Nicolae Goga Junzo Kashihara
Seungchul Chae Julian Goldman Colin Kennedy
Raul Gonzalez Gomez
Rahul Chauhan Ralph Kent
Chris Gough
Peggy Chien Laurie M. Kermes
David Chiu Channa Gowda Ahmad Kheirandish
Jinyong Choi Charles M. Gropper Junhyung Kim
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 12 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)
Minho Kim Yoshiteru Nozoe Nicholas Steblay
Min-Joon Kim Lars Steubesand
Abraham Ofek
Taekon Kim John (Ivo) Stivoric
Brett Olive
Tetsuya Kimura BegonyaOtal Raymond A. Strickland
Michael J. Kirwan Marco Paleari ChandrasekaranSubramaniam
Alfred Kloos Bud Panjwani Hermanni Suominen
Jeongmee Koh Carl Pantiskas Lee Surprenant
Jean-Marc Koller Harry P. Pappas Ravi Swami
John Koon Hanna Park Ray Sweidan
Patty Krantz Jong-Tae Park Na Tang
Raymond Krasinski Myungeun Park Yi Tang
Alexander Kraus Soojun Park Haruyuyki Tatsumi
Ramesh Krishna Phillip E. Pash Isabel Tejero
Geoffrey Kruse TongBi Pei Tom Thompson
Falko Kuester Soren Petersen Jonas Tirén
Rafael Lajara James Petisce Janet Traub
Pierre Landau Peter Piction Gary Tschautscher
Jaechul Lee Masato Tsuchid
Michael Pliskin
JongMuk Lee Ken Tubman
Varshney Prabodh
Kyong Ho Lee
Jeff Price Akib Uddin
Rami Lee Harald Prinzhorn Sunil Unadkat
Sungkee Lee Harry Qiu Fabio Urbani
Woojae Lee Tanzilur Rahman Philipp Urbauer
Qiong Li Phillip Raymond Laura Vanzago
Xiangchen Li Terrie Reed Alpo Värri
Yingsong Li Barry Reinhold Andrei Vasilateanu
Zhuofang Li Brian Reinhold Dalimar Velez
Patrick Lichter Melvin I. Reynolds Martha Velezis
Lin Lin John G. Rhoads Rudi Voon
Jisoon Lim Jeffrey S. Robbins Barry Vornbrock
Joon-Ho Lim Chris Roberts Isobel Walker
Liang Liu Moskowitz Robert David Wang
Xiaoming Liu Stefan Robert Linling Wang
Wei-Jung Lo Scott M. Robertson Jerry P. Wang
Charles Lowe Timothy Robertson Yao Wang
Don Ludolph Patricia Roder
Yi Wang
David Rosales
Christian Luszick Steve Warren
Bill Saltzstein
Bob MacWilliams Fujio Watanabe
Srikkanth Madhurbootheswaran Giovanna Sannino Toru Watsuji
Miriam L. Makhlouf Jose A. Santos-Cadenas David Weissman
Romain Marmot Stefan Sauermann Kathleen Wible
Sandra Martinez John Sawyer Paul Williamson
Miguel Martínez de AloisSchloegl Jan Wittenber
EsproncedaCámara Paul S. Schluter Jia-Rong Wu
Peter Mayhew Mark G. Schnell Will Wykeham
Jim McCain Richard A. Schrenker Ariton Xhafa
LászlóMeleg Antonio Scorpiniti Ricky Yang
Alexander Mense KwangSeok Seo Shaoqin Ye
Behnaz Minaei Riccardo Serafin Melanie S. Yeung
Jinsei Miyazaki Sid Shaw Qiang Yin
Erik Moll Frank Shen Done-Sik Yoo
Darr Moore Min Shih
Zhi Yu
Mazen Shihabi
Carsten Mueglitz Jianchao Zeng
Redmond Shouldice
Soundharya Nagasubramanian Jason Zhang
Alex Neefus Sternly K. Simon Jie Zhao
Trong-Nghia Nguyen-Dobinsky Marjorie Skubic Thomas Zhao
Michael E. Nidd Robert Smith Daidi Zhong
Jim Niswander Ivan Soh Hongyuan Zhong
Hongliang Niu Motoki Sone Yuanhong Zhong
Hiroaki Niwamoto Emily Sopensky Miha Zoubek
Thomas Norgall Rajagopalan Srinivasan Szymon Zyskoter
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 13 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)

The following members of the individual balloting committee voted on this standard. Balloters may have

voted for approval, disapproval, or abstention.
Bjoern Andersen Werner Hoelzl Iulian Profir
Lyle Bullock Noriyuki Ikeuchi
Beth Pumo
Keith Chow Atsushi Ito Stefan Schlichting
Malcolm Clarke Raj Jain Janek Schumann
Kenneth Fuchs Piotr Karocki Walter Struppler
David Fuschi Martin Kasparick Oren Yuen
Randall Groves Raymond Krasinski Janusz Zalewski
Robert Heile H. Moll Daidi Zhong

When the IEEE SA Standards Board approved this standard on 30 January 2020, it had the following

membership:
Gary Hoffman, Chair
Vacant Position, Vice Chair
Jean-Philippe Faure, Past Chair
Konstantinos Karachalios, Secretary
Ted Burse David J. Law Dorothy Stanley
Doug Edwards Howard Li Mehmet Ulema
J. Travis Griffith Dong Liu Lei Wang
Grace Gu Kevin Lu Sha Wei
Guido R. Hiertz Paul Nikolich Philip B. Winston
Joseph L. Koepfinger* Damir Novosel Daidi Zhong
John D. Kulick Jon Walter Rosdahl Jingyi Zhou
*Member Emeritus
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 14 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)
Introduction

This introduction is not part of IEEE Std 11073-10404-2020, Health informatics—Personal health device communication—

Part 10404: Device specialization—Pulse oximeter.

ISO/IEEE 11073 standards enable communication between medical devices and external computer systems.

This document uses the optimized framework created in IEEE Std 11073-20601-2019™ and describes a

specific, interoperable communication approach for the pulse oximeter. These standards align with, and

draw on, the existing clinically focused standards to provide support for communication of data from

clinical or personal health devices.
Information on references can be found in Clause 2.
Copyright © 2021 IEEE. All rights reserved.
---------------------- Page: 15 ----------------------
oSIST prEN ISO/IEEE 11073-10404:2022
ISO/IEEE 11073-10404:2022(E)
Contents
1. Overview .......................
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.