SIST EN ISO 11073-10102:2014

Health informatics - Point-of-care medical device communication - Part 10102: Nomenclature: Annotated ECG (ISO 11073-10102:2014)

This standard extends the base ISO/IEEE 11073-10101:2004 to provide support for ECG annotation terminology. Major subject areas addressed by the nomenclature include ECG beat annotations, wave component annotations, rhythm annotations, and noise annotations. It also defines additional “global” and “per-lead” numeric observation identifiers, ECG lead systems, and additional ECG lead identifiers. The nomenclature extensions may be used in conjunction with other IEEE 11073 standard components (e.g., ISO/IEEE 11073-10201:2004 [B19]) or independently with other standards.

Medizinische Informatik - Kommunikation patientennaher medizinischer Geräte - Teil 10102: Nomenklatur - Mit Annotationen versehenes EKG (ISO/IEEE 11073-10102:2014)

Informatique de santé - Communication entre dispositifs médicaux sur le site des soins - Partie 10102: Nomenclature - ECG annoté (ISO 11073-10102:2014)

L'ISO/IEEE 11073-10102:2013 étend la nomenclature de base de l'ISO/IEEE 11073-10101:2004 pour prendre en charge la terminologie relative à l'annotation de l'ECG. Les principaux thèmes abordés par la nomenclature incluent les annotations des battements ECG, les annotations des composantes des ondes, les annotations des rythmes ainsi que les annotations du bruit. Elle définit également des identificateurs d'observation numériques supplémentaires pour les mesures « globales » et « en fonction de la dérivation », des systèmes de dérivations d'ECG et des identificateurs de dérivations d'ECG supplémentaires. Les extensions de la nomenclature peuvent être utilisées conjointement avec d'autres composantes des normes IEEE 11073 (par exemple l'ISO/IEEE 11073-10201:2004 ou de façon indépendante avec d'autres normes.

Zdravstvena informatika - Komunikacija medicinskih naprav na mestu oskrbe - 10102. del: Nomenklatura: Obrazloženi elektrokardiogram (EKG) (ISO 11073-10102:2014

Ta standard razširja osnovni standard ISO/IEEE 11073-10101:2004 za zagotavljanje podpore glede terminologije za označevanje elektrokardiogramov. Glavna tematska področja, ki ji obravnava nomenklatura, vključujejo oznake udarcev, kratkovalovnih delov, ritma in šuma. Opredeljuje tudi dodatne identifikatorje številskih opažanj, sistemov elektrod in dodanih identifikatorjev elektrod na globalni ravni in ravni posameznih elektrod. Nomenklaturne razširitve je mogoče uporabljati skupaj z drugimi sestavnimi deli standarda IEEE 11073 (npr. ISO/IEEE 11073-10201:2004 [B19]) ali neodvisno z drugimi standardi.

General Information

• Status: Published
• Publication Date: 03-Jun-2014
• ICS: 11.040.55 - Diagnostic equipment
• ICS: 35.240.80 - IT applications in health care technology
• Technical Committee: ITC - Information technology
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 25-Mar-2014
• Due Date: 30-May-2014
• Completion Date: 04-Jun-2014
• Ref Project: EN ISO 11073-10102:2014 - Health informatics - Point-of-care medical device communication - Part 10102: Nomenclature - Annotated ECG (ISO/IEEE 11073-10102:2014)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11073-10102:2014
01-julij-2014
Zdravstvena informatika - Komunikacija medicinskih naprav na mestu oskrbe -
10102. del: Nomenklatura: Obrazloženi elektrokardiogram (EKG) (ISO 11073-
10102:2014
Health informatics - Point-of-care medical device communication - Part 10102:
Nomenclature: Annotated ECG (ISO 11073-10102:2014)
Informatique de santé - Communication entre dispositifs médicaux sur le site des soins -
Partie 10102: Nomenclature - ECG annoté (ISO 11073-10102:2014)
Ta slovenski standard je istoveten z: EN ISO 11073-10102:2014
ICS:
11.040.55 'LDJQRVWLþQDRSUHPD Diagnostic equipment
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO 11073-10102:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11073-10102:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 11073-10102:2014

EUROPEAN STANDARD
EN ISO 11073-10102

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2014
ICS 35.240.80
English Version
Health informatics - Point-of-care medical device communication
- Part 10102: Nomenclature - Annotated ECG (ISO/IEEE 11073-
10102:2014)
Informatique de santé - Communication entre dispositifs
médicaux sur le site des soins - Partie 10102:
Nomenclature - ECG annoté (ISO/IEEE 11073-10102:2014)
This European Standard was approved by CEN on 14 December 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11073-10102:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11073-10102:2014
EN ISO 11073-10102:2014 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11073-10102:2014
EN ISO 11073-10102:2014 (E)
Foreword
This document (EN ISO 11073-10102:2014) has been prepared by Technical Committee ISO/TC 215 “Health
informatics” in collaboration with Technical Committee CEN/TC 251 “Health informatics” the secretariat of
which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2014, and conflicting national standards shall be
withdrawn at the latest by September 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/IEEE 11073-10102:2014 has been approved by CEN as EN ISO 11073-10102:2014 without
any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 11073-10102:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 11073-10102:2014

INTERNATIONAL ISO/IEEE
STANDARD 11073-10102
First edition
2014-03-01

Health informatics — Point-of-care
medical device communication —
Part 10102:
Nomenclature — Annotated ECG
Informatique de santé — Communication entre dispositifs médicaux sur
le site des soins
Partie 10102: Nomenclature — ECG annoté




Reference number
ISO/IEEE 11073-10102:2013(E)

©
IEEE 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. Neither the ISO Central
Secretariat nor IEEE accepts any liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies
and IEEE members. In the unlikely event that a problem relating to it is found, please inform the ISO Central Secretariat or IEEE at the
address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2014
©  IEEE 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO or IEEE at the respective
address below.
ISO copyright office Institute of Electrical and Electronics Engineers, Inc.
Case postale 56  CH-1211 Geneva 20 3 Park Avenue, New York  NY 10016-5997, USA
Tel. + 41 22 749 01 11 E-mail [e-mail]
Fax + 41 22 749 09 47 Web www.ieee.org
E-mail [e-mail]
Web www.iso.org
ISO version published 2013
Published in Switzerland

ii © IEEE 2013 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers
are not necessarily members of the Institute and serve without compensation. While the IEEE administers the
process and establishes rules to promote fairness in the consensus development process, the IEEE does not
independently evaluate, test, or verify the accuracy of any of the information contained in its standards.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is called to the possibility that implementation of this standard may require the use of subject matter
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. ISO/IEEE is not responsible for identifying essential
patents or patent claims for which a license may be required, for conducting inquiries into the legal validity or
scope of patents or patent claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance or a Patent Statement and Licensing Declaration Form, if
any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard are expressly
advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is
entirely their own responsibility. Further information may be obtained from ISO or the IEEE Standards
Association.
ISO/IEEE 11073-10102 was prepared by the Substations Committee of the IEEE Power Engineering Society
of the IEEE (as IEEE 1686-2007). It was adopted by Technical Committee ISO/TC 215, Lung ventilators, in
parallel with its approval by the ISO member bodies, under the “fast-track procedure” defined in the Partner
Standards Development Organization cooperation agreement between ISO and IEEE. IEEE is responsible for
the maintenance of this document with participation and input from ISO member bodies.
ISO/IEEE 11073 consists of the following parts, under the general title Health informatics — Personal health
device communication (text in parentheses gives a variant of subtitle):
 Part 00103: Overview
 Part 10101: (Point-of-care medical device communication) Nomenclature
 Part 10102: (Point-of-care medical device communication) Nomenclature — Annotated ECG
 Part 10103: (Point-of-care medical device communication) — Nomenclature — Implantable device,
cardiac
 Part 10201: (Point-of-care medical device communication) Domain information model
 Part 10404: Device specialization — Pulse oximeter
© IEEE 2013 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
 Part 10406: Device specialization — Basic electrocardiograph (ECG) (1- to 3-lead ECG)
 Part 10407: Device specialization — Blood pressure monitor
 Part 10408: Device specialization — Thermometer
 Part 10415: Device specialization — Weighing scale
 Part 10417: Device specialization — Glucose meter
 Part 10418: Device specialization — International Normalized Ratio (INR) monitor
 Part 10420: Device specialization — Body composition analyzer
 Part 10421: Device specialization — Peak expiratory flow monitor (peak flow)
 Part 10441: Device specialization — Cardiovascular fitness and activity monitor
 Part 10471: Device specialization — Independant living activity hub
 Part 10472: Device specialization — Medication monitor
 Part 20101: (Point-of-care medical device communication) Application profiles — Base standard
 Part 20601: Application profile — Optimized exchange protocol
 Part 30200: (Point-of-care medical device communication) Transport profile — Cable connected
 Part 30300: (Point-of-care medical device communication) Transport profile — Infrared wireless
 Part 30400: (Point-of-care medical device communication) Interface profile — Cabled Ethernet
 Part 90101: (Point-of-care medical device communication) Analytical instruments — Point-of-care test
 Part 91064: (Standard communication protocol) Computer-assisted electrocardiography
 Part 92001: (Medical waveform format) — Encoding rules
iv © IEEE 2013 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 11073-10102:2014


Health informatics—Point-of-care medical device communication

Part 10102: Nomenclature—Annotated ECG
IEEE Engineering in Medicine and Biology Society

Sponsored by the
IEEE 11073™ Standards Committee


IEEE
IEEE Std 11073-10102™-2012
3 Park Avenue

New York, NY 10016-5997
USA

15 February 2013

---------------------- Page: 11 ----------------------

SIST EN ISO 11073-10102:2014

---------------------- Page: 12 ----------------------

SIST EN ISO 11073-10102:2014
TM
IEEE Std 11073-10102 -2012
ISO/IEEE 11073-10102:2014(E)
Health informatics—Point-of-care medical device communication
Part 10102: Nomenclature—Annotated ECG

Sponsor
TM
IEEE 11073 Standards Committee
of the
IEEE Engineering in Medicine and Biology Society

Approved 5 December 2012
IEEE-SA Standards Board

---------------------- Page: 13 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
Abstract: The base IEEE 11073 -10101 Nomenclature is extended by this st andard to provide
support for ECG annotation terminology. It ma y be used eit her in conjunction with other
IEEE 11073 standards (e.g., ISO/IEEE 11073-10201:2001) or independently with other
standards. The major subject areas addressed by the no menclature include ECG beat
annotations, wave component annotations, rhythm annotations, and noise annotations. Additional
“global” and “per-lead” numeric observation identifiers, ECG lead systems, and additional ECG
lead identifiers also are defined.
Keywords: annotated ECG, annotations, arrhythmias, cardiac rhythm, codes, ECG leads, ECG
TM
lead systems, ECG m easurements, home monitori ng, IEEE 11073-10102 , medical device
communication, nomenclature, pacemaker, patient monitoring, remote monitoring, terminology

•


The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA

Copyright © 2013 by The Institute of Electrical and Electronics Engineers, Inc.
All rights reserved. Published 15 February 2013. Printed in the United States of America.

IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.

EASI is a trademark in the U.S. Patent & Trademark Office, owned by the Philips Electronics North America Corporation.

PDF: ISBN 978-0-7381-8156-1 STD98104
Print: ISBN 978-0-7381-8157-8 STDPD98104

IEEE prohibits discrimination, harassment, and bullying. For more information, visit http://www.ieee.org/web/aboutus/whatis/policies/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission
of the publisher.
ii
Copyright © 2013 IEEE. All rights reserved.

---------------------- Page: 14 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
Notice and Disclaimer of Liability Concerning the Use of IEEE Documents: IEEE Standards documents are developed
within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA)
Standards Board. IEEE develops its standards through a consensus development process, approved by the American National
Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While IEEE administers the process
and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or
verify the accuracy of any of the information or the soundness of any judgments contained in its standards.
Use of an IEEE Standard is wholly voluntary. IEEE disclaims liability for any personal injury, property or other damage, of
any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the
publication, use of, or reliance upon any IEEE Standard document.
IEEE does not warrant or represent the accuracy or content of the material contained in its standards, and expressly disclaims
any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that
the use of the material contained in its standards is free from patent infringement. IEEE Standards documents are supplied "AS
IS."
The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or
provide other goods and services related to the scope of the IEEE standard. Furthermore, the viewpoint expressed at the time a
standard is approved and issued is subject to change brought about through developments in the state of the art and comments
received from users of the standard. Every IEEE standard is subjected to review at least every ten years. When a document is
more than ten years old and has not undergone a revision process, it is reasonable to conclude that its contents, although still of
some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the
latest edition of any IEEE standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on
behalf of, any person or entity. Nor is IEEE undertaking to perform any duty owed by any other person or entity to another.
Any person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of
reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the
appropriateness of a given IEEE standard.
Translations: The IEEE consensus development process involves the review of documents in English only. In the event that
an IEEE standard is translated, only the English version published by IEEE should be considered the approved IEEE standard.
Official Statements: A statement, written or oral, that is not processed in accordance with the IEEE-SA Standards Board
Operations Manual shall not be considered the official position of IEEE or any of its committees and shall not be considered to
be, nor be relied upon as, a formal position of IEEE. At lectures, symposia, seminars, or educational courses, an individual
presenting information on IEEE standards shall make it clear that his or her views should be considered the personal views of
that individual rather than the formal position of IEEE.
Comments on Standards: Comments for revision of IEEE Standards documents are welcome from any interested party,
regardless of membership affiliation with IEEE. However, IEEE does not provide consulting information or advice pertaining
to IEEE Standards documents. Suggestions for changes in documents should be in the form of a proposed change of text,
together with appropriate supporting comments. Since IEEE standards represent a consensus of concerned interests, it is
important to ensure that any responses to comments and questions also receive the concurrence of a balance of interests. For
this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to provide an instant
response to comments or questions except in those cases where the matter has previously been addressed. Any person who
would like to participate in evaluating comments or revisions to an IEEE standard is welcome to join the relevant IEEE
working group at http://standards.ieee.org/develop/wg/.
Comments on standards should be submitted to the following address:
Secretary, IEEE-SA Standards Board
445 Hoes Lane
Piscataway, NJ 08854-4141
USA
Photocopies: Authorization to photocopy portions of any individual standard for internal or personal use is granted by The
Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center.
To arrange for payment of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive,
Danvers, MA 01923 USA; [phone]. Permission to photocopy portions of any individual standard for educational
classroom use can also be obtained through the Copyright Clearance Center.
iii
Copyright © 2013 IEEE. All rights reserved.

---------------------- Page: 15 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
Notice to users
Laws and regulations
Users of IEEE Standards documents should consult all applicable laws and regulations. Compliance with
the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory
requirements. Implementers of the standard are responsible for observing or referring to the applicable
regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not
in compliance with applicable laws, and these documents may not be construed as doing so.
Copyrights
This document is copyrighted by the IEEE. It is made available for a wide variety of both public and
private uses. These include both use, by reference, in laws and regulations, and use in private self-
regulation, standardization, and the promotion of engineering practices and methods. By making this
document available for use and adoption by public authorities and private users, the IEEE does not waive
any rights in copyright to this document.
Updating of IEEE documents
Users of IEEE Standards documents should be aware that these documents may be superseded at any time
by the issuance of new editions or may be amended from time to time through the issuance of amendments,
corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the
document together with any amendments, corrigenda, or errata then in effect. In order to determine whether
a given document is the current edition and whether it has been amended through the issuance of
amendments, corrigenda, or errata, visit the IEEE-SA Website at http://standards.ieee.org/index.html or
contact the IEEE at the address listed previously. For more information about the IEEE Standards
Association or the IEEE standards development process, visit the IEEE-SA Website at
http://standards.ieee.org/index.html.
Errata
Errata, if any, for this and all other standards can be accessed at the following URL:
http://standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata
periodically.
iv
Copyright © 2013 IEEE. All rights reserved.

---------------------- Page: 16 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
Patents
Attention is called to the possibility that implementation of this standard may require use of subject matter
covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to
the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant
has filed a statement of assurance via an Accepted Letter of Assurance, then the statement is listed on the
IEEE-SA Website http://standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may
indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without
compensation or under reasonable rates, with reasonable terms and conditions that are demonstrably free of
any unfair discrimination to applicants desiring to obtain such licenses.
Essential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not
responsible for identifying Essential Patent Claims for which a license may be required, for conducting
inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or
conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing
agreements are reasonable or non-discriminatory. Users of this standard are expressly advised that
determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely
their own responsibility. Further information may be obtained from the IEEE Standards Association.
v
Copyright © 2013 IEEE. All rights reserved.

---------------------- Page: 17 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
Introduction
This introduction is not part of IEEE Std 11073-10102-2012, Health informatics—Point-of-care medical device
communication—Nomenclature—Annotated ECG.
a
This standard extends the base ISO/IEEE 11073-10101:2004 nomenclature to provide support for
electrocardiogram (ECG) annotation terminology. The major subject areas addressed by the nomenclature
include ECG beat annotations, wave component annotations, rhythm annotations, and noise annotations. It
also defines additional “global” and “per-lead” numeric observation identifiers, ECG lead systems, and
additional ECG lead identifiers. The nomenclature extensions may be used in conjunction with other
b
IEEE 11073 standard components (e.g., ISO/IEEE 11073-10201:2004 [B19] ) or independently with other
standards.

a
Information on references can be found in Clause 2.
b
The numbers in brackets correspond to those in the bibliography in Annex E.
vi
Copyright © 2013 IEEE. All rights reserved.

---------------------- Page: 18 ----------------------

SIST EN ISO 11073-10102:2014
ISO/IEEE 11073-10102:2014(E)
Contents
1. Overview . 1
1.1 Scope . 1
1.2 Purpose . 1
1.3 Audience . 2
1.4 Context . 2
2. Normative references . 3
3. Definitions, acronyms, and abbreviations . 3
3.1 Definitions . 3
3.2 Acronyms and abbreviations . 4
4. Introduction to IEEE Std 11073-10102 . 5
4.1 Clinical background . 5
5. Nomenclature requirements . 7
5.1 Overview . 7
5.2 Scope requirements . 7
5.3 Organizational structure requirements . 7
5.4 Semantic requirements. 7
5.5 Distribution format requirements . 7
6. Nomenclature structure . 8
7. Conformance . 8
8. Extensibility and versioning . 10
Annex A (normative) Base terms . 11
Annex B (normative) Expanded terms and numeric codes . 68
Annex C (informative) Sc
...