iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST prEN 12635:2017

(Main)

Industrial, commercial and garage doors and gates - Information for use

Industrial, commercial and garage doors and gates - Information for use

This European Standard specifies the information to be provided by the door manufacturer and the components manufacturer to ensure safe installation, operation, use (including maintenance and repair) of doors, gates and barriers intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
This European Standard applies to manually operated and power operated doors, to doors and components intended to be installed by “non professional installers” and may also apply to the installation and use of upgrading component(s).
The European Standard only applies to the doors and components manufactured after the date of publication.

Tore - Informationen zur Nutzung

Diese Europäische Norm legt die Informationen fest, die für die Sicherstellung der sicheren Nutzung, einschließlich Einbau, Wartung und Reparatur sowie Ausbau/Abbau von hand- und kraftbetätigten Toren, die für den Einbau in die Zugangsbereiche von Personen vorgesehen sind und deren hauptsächlich vorgesehene Verwendung darin besteht, eine sichere Zufahrt für Waren und Fahrzeuge, begleitet oder geführt (gesteuert) von Personen, in industrielle, gewerbliche oder Wohnbereiche zu ermöglichen, mitzuliefern sind.
Diese Europäische Norm behandelt ferner kraftbetätigte und sich vertikal bewegende gewerbliche Tore wie Rolltore und -gitter, die in Einzelhandelseinrichtungen eingesetzt werden und die hauptsächlich dem Schutz von Waren dienen.
Diese Europäische Norm gilt nicht für:
-   Schleusen- und Hafentore;
-   Aufzugstüren oder -tore;
-   Türen in Fahrzeugen;
-   Tresortüren;
-   Türen und Tore zum Einsperren von Tieren, es sei denn, sie befinden sich am Rande eines Geländes;
-   textile Theatervorhänge;
-   sich waagerecht bewegende kraftbetätigte Tore, die vorwiegend für die Nutzung durch Fußgänger vorgesehen sind;
-   Türen oder Tore außerhalb der Reichweite von Personen (z. B. Krantore);
-   Eisenbahnschranken;
-   Abschlüsse, die ausschließlich für die Verwendung durch Fußgänger vorgesehen sind;
-   ausschließlich für Fahrzeuge verwendete Schranken auf Autobahnen.
Immer wenn in diesem Dokument der Begriff "Tor" verwendet wird, ist darunter die gesamte Vielfalt von Türen, Toren und Schranken zu verstehen, die im Anwendungsbereich dieser Norm definiert wird.

Portes équipant les locaux industriels et commerciaux et les garages – Informations pour l'utilisation

Vrata v industrijske in javne prostore ter garažna vrata - Informacije za uporabo

General Information

Status
Not Published
Public Enquiry End Date
29-Jul-2015
ICS
91.060.50 - Doors and windows
91.090 - External structures
Technical Committee
ISTP - Doors and windows
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
22-Apr-2024
Due Date
27-Apr-2024
Completion Date
22-Apr-2024
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
FprEN 12635:2017 - Industrial, commercial and garage doors and gates - Information for use

Relations

Revised
SIST EN 12635:2003+A1:2009 - Industrial, commercial and garage doors and gates - Installation and use
Effective Date
19-Jan-2023
Revised
SIST EN 12635:2003+A1:2009 - Industrial, commercial and garage doors and gates - Installation and use
Effective Date
18-Jan-2023
Revised
SIST EN 12635:2003+A1:2009 - Industrial, commercial and garage doors and gates - Installation and use
Effective Date
01-Jul-2015

Buy Standard

prEN 12635:2015prEN 12635:2015
PreviousNext
Draft
prEN 12635:2015
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12635:2015
01-julij-2015
Vrata v industrijske in javne prostore ter garažna vrata - Informacije za uporabo
Industrial, commercial and garage doors and gates - Information for use
Tore - Informationen zur Nutzung
Portes équipant les locaux industriels et commerciaux et les garages – Informations pour
l'utilisation
Ta slovenski standard je istoveten z: prEN 12635
ICS:
91.060.50 Vrata in okna Doors and windows
91.090 Konstrukcije zunaj stavb External structures
oSIST prEN 12635:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12635:2015

---------------------- Page: 2 ----------------------
oSIST prEN 12635:2015

EUROPEAN STANDARD
DRAFT
prEN 12635
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2015
ICS 91.060.50 Will supersede EN 12635:2002+A1:2008
English Version
Industrial, commercial and garage doors and gates - Information
for use
Portes équipant les locaux industriels et commerciaux et les Tore - Informationen zur Nutzung
garages - Informations pour l'utilisation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12635:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12635:2015
prEN 12635:2015 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
1.1 General .5
1.2 Exclusions .5
2 Normative references .5
3 Terms and definitions .5
4 List of significant hazards .5
4.1 Insufficient information .5
4.2 Location and nature of information .6
5 Requirements .6
5.1 Information .6
5.1.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12453:2017+A1:2022(Main)
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods
EN 12453:2017+A1:2021

This European Standard specifies requirements and test methods for the safety in use of power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is  giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers power operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This European Standard deals with all significant hazards, hazardous situations and events relevant to the power operation of industrial, commercial and garage doors, and gates when they are used as intended and under conditions of misuse which are reasonably foreseeable as identified in Clause 4.
All lifetime phases of the machinery including transportation, assembly, dismantling, disabling and scrapping are considered by this standard.
This European Standard does not apply to
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   armoured doors;
-   doors mainly for the retention of animals, unless they are at the site perimeter ;
-   theatre textile curtains;
-   horizontally moving power operated doors mainly intended for pedestrian use;
-   doors outside the reach of people (such as crane gantry fences);
-   railway barriers;
-   barriers intended solely for use by pedestrians;
-   barriers used solely for vehicles on motorways.
Whenever the term "door" is used in this document, it shall be deemed to cover the full scope of types and variances of doors, gates and barriers in the scope of this Standard.
This European Standard does not deal with any specific requirements on noise emitted from power operated door, gate and barrier, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises as their noise emission is not considered to be a relevant hazard.
NOTE   Noise emission of power operated doors is not a significant hazard for the users of these products. It is a comfort aspect.
This European Standard is not applicable to machinery which are manufactured before the date of publication of the standard.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12604:2017+A1:2021(Main)
Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods
EN 12604:2017+A1:2020

This European Standard specifies mechanical requirements and test methods for manually operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
This European Standard also covers manually operated vertically moving commercial doors such as rolling shutters and rolling grilles, used in retail premises which are mainly provided for goods protection.
This document applies only to doors which are not part of the load carrying structure of the building.
It does not apply to:
—   lock gates and dock gates;
—   doors on vehicles;
—   doors mainly for the retention of animals unless they are at the site perimeter;
—   doors intended for pedestrian use;
—   railway barriers.
Whenever the term “door” is used in this document, it is deemed to cover the full scope of types and variances of doors, gates and barriers defined by the scope of this European Standard.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13241:2003+A2:2016(Main)
Industrial, commercial, garage doors and gates - Product standard, performance characteristics
EN 13241:2003+A2:2016

1.1   General
This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034.
This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods.
These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard.
These devices can be manually or power operated.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000 6 3.
1.2   Exclusions
This European Standard does not apply to the following which are intended for a different use:
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   armoured doors;
-   doors mainly for the retention of animals;
-   theatre textile curtains;
-   horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361;
-   revolving doors of any size;
-   railway barriers;
-   barriers used solely for vehicles.
This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition.
This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs.
This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation.
The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive.
1.3   Specific applications
This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door.
It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade.
When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    30 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12428:2013(Main)
Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for classification
EN 12428:2013

This European Standard specifies a method for calculating the thermal transmittance of industrial, commercial and garage doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with EN 13241-1. The calculation can include different types of glazing, frames with or without thermal breaks, and different types of opaque panels and thermal bridge effects at the edge of the panel or joint between the glazed area, the frame area and the panel area. This paper does not include the effects of solar radiation, heat transfer caused by air leakage, calculation of condensation, additional heat transfer at the corners and edges of the door connections to the main building structure, or thermal effects between the door and the main building structure.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12978:2003+A1:2009(Main)
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 12978:2003+A1:2009

1.1   General
This European Standard applies for design, construction and testing of sensitive protective devices where the device is used to detect pedestrians including in particular applications, slow moving elderly persons, slow moving disabled persons and children who may be exposed to injury by power operated doors, gates and barriers, electrically powered from a public supply and intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial, public or residential premises.
This standard also covers safety devices for commercial doors such as rolling shutters and rolling grilles when used as doors on retail premises which are mainly provided for the access of persons rather than vehicles or goods.
This standard deals with all significant hazards listed in annex A and specifies requirements to eliminate or minimise them.
This standard covers the requirements for electrical powered safety devices using mains supply provided for installation on or used in conjunction with powered doors in order to avoid hazardous situations which can be encountered when a door is used normally.
The sensitive protective device is designed to give a change in the output signal switching device which may be used to provide protection for the person being at risk. It applies to ready to use sensitive protective device and integrated sensitive protective device (mounted on or connected to a power operated door in normal use).
This standard only applies to door safety devices manufactured after the date of publication.
1.2   Exclusions
This European Standard does not apply to protective equipment for installation on doors which are intended for a different use than the one described above such as:
-   lock gates and dock gates;
-   doors on lifts;
-   doors on vehicles;
-   doors mainly for the retention of animals;
-   theatre textile curtains;

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    33 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12444:2001(Main)
Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation
EN 12444:2000

1.1 General This European Standard specifies the test method and / or calculation of resistance to wind load for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13 241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - door mainly for the retention of animals; - theatre textile curtains;    
- horizontally moving doors less than 2,5 m wide and 6,25 m 2 area, designed principally for pedestrian use; - revolving doors of any size;
- doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    14 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12426:2001(Main)
Industrial, commercial and garage doors and gates - Air permeability - Classification
EN 12426:2000

1.1 General This European Standard specifies the classification for air permeability for doors in a closed position, when tested in accordance with EN 12427. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12427:2001(Main)
Industrial, commercial and garage doors and gates - Air permeability - Test method
EN 12427:2000

1.1 General This European Standard specifies a test method for determining the air permeability for doors in a closed position. The doors are intended for installation in areas in the reach of people, for which the main in-tended uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13 241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts;
- doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of  people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12424:2001(Main)
Industrial, commercial and garage doors and gates - Resistance to wind load - Classification
EN 12424:2000

1.1 General This European Standard specifies the classification for wind load for doors in a closed posi-tion. The doors are intended for installation in areas in the reach of people, for which the main intended uses are giving safe access for goods, vehicles and persons in industrial, commer-cial or residential premises.The doors may be manually or power operated. NOTE In case of wind load it is not necessary that the door can be opened or closed. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for
pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12425:2001(Main)
Industrial, commercial and garage doors and gates - Resistance to water penetration - Classification
EN 12425:2000

1.1 General This European Standard specifies the classification for resistance to water penetration for doors in a closed position, when tested in accordance with EN 12489. The doors are intended for installation in areas in the reach of people, for which the main in-tended
uses are giving safe access for goods, vehicles and persons in industrial, commercial or residential premises. The doors may be manually or power operated. This document applies to all doors provided in accordance with prEN 13241:1998. 1.2 Exclusions It does not apply to: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving doors less than 2,5 m wide and 6,25 m2 area, designed principally for pedestrian use; - revolving doors of any size; - doors outside the reach of people (such as crane gantry fences); - railway barriers; - barriers used solely for vehicles.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day