SIST EN 27721:1996
(Main)Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
Countersunk head screws - Head configuration and gauging (ISO 7721:1983)
Specifies the characteristics of products with thread sizes from M 1,6 up to and including M 20; it recommends a gauging method for the dimensions laid down in the respective product standards; the annex contains the calculation basis
Senkschrauben - Gestaltung und Prüfung von Senkköpfen (ISO 7721:1983)
Vis a tete fraisée - Configuration de la tete et vérification par calibre (ISO 7721:1983)
La présente Norme internationale spécifie les configurations de tête des vis à tête fraisée fendue et à empreinte, et recommande une méthode de vérification par calibre des dimensions de tête fixées dans les normes de produit correspondantes.
Vijaki z ugrezno glavo - Oblikovanje in preskušanje ugreznih glav
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vijaki z ugrezno glavo - Oblikovanje in preskušanje ugreznih glavSenkschrauben - Gestaltung und Prüfung von Senkköpfen (ISO 7721:1983)Vis a tete fraisée - Configuration de la tete et vérification par calibre (ISO 7721:1983)Countersunk head screws - Head configuration and g
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.