Satellite Earth Stations and Systems (SES) - Satellite broadcast reception equipment - Part 2: Indoor unit - Harmonised Standard for access to radio spectrum

REN/SES-00443-2

Satelitske zemeljske postaje in sistemi (SES) - Oprema za sprejemanje satelitske radiodifuzije - 2. del: Notranja enota - Harmonizirani standard za dostop do radijskega spektra

General Information

Status
Not Published
Public Enquiry End Date
21-Jun-2021
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
29-Mar-2021
Due Date
16-Aug-2021
Completion Date
02-Jul-2021

Buy Standard

Standard
ETSI EN 303 372-2 V1.2.1 (2021-06) - Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part 2: Indoor unit; Harmonised Standard for access to radio spectrum
English language
18 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
oSIST prEN 303 372-2 V1.2.0:2021
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

ETSI EN 303 372-2 V1.2.1 (2021-06)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Satellite broadcast reception equipment;
Part 2: Indoor unit;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 303 372-2 V1.2.1 (2021-06)
Reference
REN/SES-00443-2
Keywords
broadcasting, receiver, requirements, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability

The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of

experience to understand and interpret its content in accordance with generally accepted engineering or

other professional standard and applicable regulations.

No recommendation as to products and services or vendors is made or should be implied.

In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not

limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property

rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages

for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use

of or inability to use the software.
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and

microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 303 372-2 V1.2.1 (2021-06)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 5

Introduction ........................................................................................................................................................ 5

1 Scope ........................................................................................................................................................ 6

2 References ................................................................................................................................................ 6

2.1 Normative references ......................................................................................................................................... 6

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 7

3.1 Terms .................................................................................................................................................................. 7

3.2 Symbols .............................................................................................................................................................. 7

3.3 Abbreviations ..................................................................................................................................................... 7

4 Technical requirements specifications ..................................................................................................... 7

4.1 Environmental profile ......................................................................................................................................... 7

4.2 Equipment capabilities ....................................................................................................................................... 8

4.3 Conformance requirements ................................................................................................................................ 8

4.3.1 Adjacent signal selectivity ............................................................................................................................ 8

4.3.2 Dynamic range .............................................................................................................................................. 9

5 Testing for compliance with technical requirements ................................................................................ 9

5.1 Environmental conditions for testing ................................................................................................................. 9

6 Test methods ............................................................................................................................................ 9

6.1 Adjacent signal selectivity .................................................................................................................................. 9

6.2 Dynamic range ................................................................................................................................................. 10

Annex A (informative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 12

Annex B (informative): Interface between ODU and IDU ................................................................. 13

Annex C (normative): Applicability in conjunction with EN 50585:2014 ...................................... 14

Annex D (informative): Applicability of parameters given in ETSI EG 203 336 ............................. 15

Annex E (informative): Other IDU features and performance characteristics ................................ 16

Annex F (informative): Change history ............................................................................................... 17

History .............................................................................................................................................................. 18

ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 303 372-2 V1.2.1 (2021-06)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations

pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be

found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to

ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the

ETSI Web server (https://ipr.etsi.org/).

Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,

including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not

referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,

essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP

Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the

oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.

Foreword

This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth Stations

and Systems (SES).

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.5] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Directive 1999/5/EC [i.2].

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive and associated

EFTA regulations.

The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in ETSI

EN 303 372-1 [i.1].
National transposition dates
Date of adoption of this EN: 21 June 2021
Date of latest announcement of this EN (doa): 30 September 2021
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2022
Date of withdrawal of any conflicting National Standard (dow): 31 March 2023
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 303 372-2 V1.2.1 (2021-06)
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

Introduction
See ETSI EN 303 372-1 [i.1].
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 303 372-2 V1.2.1 (2021-06)
1 Scope

The present document applies to InDoor Units (IDUs) for satellite broadcast reception. An indoor unit gets on an input

interface the signal that has been received from satellite and processed by the OutDoor Unit (ODU). It performs carrier

selection, demodulation, audio and video decoding.

IDUs in the scope of the present document demodulate broadcast carriers by means of a Zero IF tuner.

Part of the IDU functionality may be integrated with the ODU. In that case the present document applies to this part of

functionality as well as the remaining part in the IDU.
The indoor unit may be integrated with a domestic television receiver.

The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the

efficient use of radio spectrum in order to avoid harmful interference.
2 References
2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

https://docbox.etsi.org/Reference/.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are necessary for the application of the present document.

Not applicable.
2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the

user with regard to a particular subject area.

[i.1] ETSI EN 303 372-1: "Satellite Earth Stations and Systems (SES); Satellite broadcast reception

equipment; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band;

Harmonised Standard for access to radio spectrum".

[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the

harmonisation of the laws of the Member States relating to the making available on the market of

radio equipment and repealing Directive 1999/5/EC.

[i.3] ETSI EG 203 336 (V1.2.1): "Guide for the selection of technical parameters for the production of

Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU".

[i.4] EN 50585:2014: "Communications protocol to transport satellite delivered signals over IP

networks", (produced by CENELEC).
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 303 372-2 V1.2.1 (2021-06)

[i.5] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request

to the European Committee for Electrotechnical Standardisation and to the European

Telecommunications Standards Institute as regards radio equipment in support of Directive

2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:

roll-off: the bandwidth of a pulse shaping filter that is occupied beyond the symbol rate, divided by the symbol rate

signal to noise ratio threshold: lowest signal to noise ratio at demodulator input that allows receiving a bit stream

quasi error free

NOTE: The meaning of quasi error free depends on the modulation and coding standard applied. For example,

-11 -7

with DVB-S it means a bit error rate of 10 , with DVB-S2 a packet error rate of 10 a

...

SLOVENSKI STANDARD
oSIST prEN 303 372-2 V1.2.0:2021
01-junij-2021
Satelitske zemeljske postaje in sistemi (SES) - Oprema za sprejemanje satelitske
radiodifuzije - 2. del: Notranja enota - Harmonizirani standard za dostop do
radijskega spektra

Satellite Earth Stations and Systems (SES) - Satellite broadcast reception equipment -

Part 2: Indoor unit - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 303 372-2 V1.2.0 (2021-03)
ICS:
33.070.40 Satelit Satellite
33.170 Televizijska in radijska Television and radio
difuzija broadcasting
oSIST prEN 303 372-2 V1.2.0:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
---------------------- Page: 2 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
Draft ETSI EN 303 372-2 V1.2.0 (2021-03)
HARMONISED EUROPEAN STANDARD
Satellite Earth Stations and Systems (SES);
Satellite broadcast reception equipment;
Part 2: Indoor unit;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
2 Draft ETSI EN 303 372-2 V1.2.0 (2021-03)
Reference
REN/SES-00443-2
Keywords
broadcasting, receiver, requirements, satellite
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI

deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and

of the oneM2M Partners.
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
3 Draft ETSI EN 303 372-2 V1.2.0 (2021-03)
Contents

Intellectual Property Rights ................................................................................................................................ 4

Foreword ............................................................................................................................................................. 4

Modal verbs terminology .................................................................................................................................... 4

Introduction ........................................................................................................................................................ 5

1 Scope ........................................................................................................................................................ 6

2 References ................................................................................................................................................ 6

2.1 Normative references ......................................................................................................................................... 6

2.2 Informative references ........................................................................................................................................ 6

3 Definition of terms, symbols and abbreviations ....................................................................................... 7

3.1 Terms .................................................................................................................................................................. 7

3.2 Symbols .............................................................................................................................................................. 7

3.3 Abbreviations ..................................................................................................................................................... 7

4 Technical requirements specifications ..................................................................................................... 7

4.1 Environmental profile ......................................................................................................................................... 7

4.2 Equipment capabilities ....................................................................................................................................... 8

4.3 Conformance requirements ................................................................................................................................ 8

4.3.1 Adjacent signal selectivity ............................................................................................................................ 8

4.3.2 Dynamic range .............................................................................................................................................. 9

5 Testing for compliance with technical requirements ................................................................................ 9

5.1 Environmental conditions for testing ................................................................................................................. 9

6 Test methods ............................................................................................................................................ 9

6.1 Adjacent signal selectivity .................................................................................................................................. 9

6.2 Dynamic range ................................................................................................................................................. 10

Annex A (informative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 12

Annex B (informative): Interface between ODU and IDU ................................................................. 13

Annex C (normative): Applicability in conjunction with EN 50585:2014 ...................................... 14

Annex D (informative): Applicability of parameters given in ETSI EG 203 336 ............................. 15

Annex E (informative): Other IDU features and performance characteristics ................................ 16

Annex F (informative): Change history ............................................................................................... 17

History .............................................................................................................................................................. 18

ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
4 Draft ETSI EN 303 372-2 V1.2.0 (2021-03)
Intellectual Property Rights
Essential patents

IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Trademarks

The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no

right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does

not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.

Foreword

This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Satellite Earth

Stations and Systems (SES), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI

standards EN Approval Procedure.

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.5] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Directive 1999/5/EC [i.2].

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated

EFTA regulations.

The present document is part 2 of a multi-part deliverable. Full details of the entire series can be found in ETSI

EN 303 372-1 [i.1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa

Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
5 Draft ETSI EN 303 372-2 V1.2.0 (2021-03)
Introduction
See ETSI EN 303 372-1 [i.1].
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
6 Draft ETSI EN 303 372-2 V1.2.0 (2021-03)
1 Scope

The present document applies to InDoor Units (IDUs) for satellite broadcast reception. An indoor unit gets on an input

interface the signal that has been received from satellite and processed by the OutDoor Unit (ODU). It performs carrier

selection, demodulation, audio and video decoding.

IDUs in the scope of the present document demodulate broadcast carriers by means of a Zero IF tuner.

Part of the IDU functionality may be integrated with the ODU. In that case the present document applies to this part of

functionality as well as the remaining part in the IDU.
The indoor unit may be integrated with a domestic television receiver.

The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the

efficient use of radio spectrum in order to avoid harmful interference.
2 References
2.1 Normative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

Referenced documents which are not found to be publicly available in the expected location might be found at

https://docbox.etsi.org/Reference/.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are necessary for the application of the present document.

Not applicable.
2.2 Informative references

References are either specific (identified by date of publication and/or edition number or version number) or

non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the

referenced document (including any amendments) applies.

NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee

their long term validity.

The following referenced documents are not necessary for the application of the present document but they assist the

user with regard to a particular subject area.

[i.1] ETSI EN 303 372-1: "Satellite Earth Stations and Systems (SES); Satellite broadcast reception

equipment; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band;

Harmonised Standard for access to radio spectrum".

[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the

harmonisation of the laws of the Member States relating to the making available on the market of

radio equipment and repealing Directive 1999/5/EC.

[i.3] ETSI EG 203 336 (V1.2.1): "Guide for the selection of technical parameters for the production of

Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU".

[i.4] EN 50585:2014: "Communications protocol to transport satellite delivered signals over IP

networks" (produced by CENELEC).
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 303 372-2 V1.2.0:2021
7 Draft ETSI EN 303 372-2 V1.2.0 (2021-03)

[i.5] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request

to the European Committee for Electrotechnical Standardisation and to the European

Telecommunications Standards Institute as regards radio equipment in support of Directive

2014/53/EU of the European Parliament and of the Council.
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:

roll-off: the bandwidth of a pulse shaping filter that is occupied beyond the symbol rate, divided by the symbol rate

signal to noise ratio threshold: lowest signal to noise ratio at demodulator input that allows receiving a bit stream

quasi error free

NOTE: The meaning of quasi error free depends on the modulation and coding standard applied. For example,

-11 -7

with DVB-S it means a bit error rate of 10 , with DVB-S2 a packet error rate of 10 and with DVB-S2X

a frame error rate of 10 .
3.2 Symbols
For the purposes of the present document, the following symbols apply:
F ideal signal
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.