REN/ERM-TG17-162

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English language
    sale 15% off
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

IEC 62106-9:2021 specifies the Radio Broadcast Data System (RBDS), which is an RDS-compatible variant used in countries of North America. RBDS was first standardized by the U.S. National Radio Systems Committee (NRSC) in 1993 and subsequently revised in 1998, 2004, 2005 and 2011 . With the publication of this edition of IEC 62106, the RDS and RBDS standards are now harmonized into a single document. The frequency range of operation (64,0 MHz to 108,0 MHz as indicated by the title of this document) varies according to regional regulatory authority. The U.S. range is 88 MHz to 108 MHz, as set by the U.S. Federal Communications Commission.

  • Standard
    19 pages
    English language
    sale 15% off

The present document specifies the optional extensions of the S2 system, identified by the S2X denomination. The
present document also includes amendments to the standard to enable beam hopping operation.

  • Standard
    165 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    165 pages
    English language
    sale 15% off
  • Standard
    165 pages
    English language
    sale 15% off

The present document is a specification of the lower layers and the lower layer signalling system for the two-way
satellite network variants defined by ETSI TS 101 545-3 [i.16]. The present document constitutes a complete
specification of the lower layers for a transparent star satellite network, a transparent mesh overlay satellite network and
a regenerative re-multiplexing satellite network. Also, components required for a satellite network with a TRANSEC
system are included.
The present document is normative for the consumer terminal profile in a transparent star satellite network as defined
by ETSI TS 101 545-3 [i.16], and does also include normative components specific to the other terminal profiles and
satellite network variants defined by ETSI TS 101 545-3 [i.16].

  • Standard
    250 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    250 pages
    English language
    sale 15% off
  • Standard
    250 pages
    English language
    sale 15% off
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies the Service Information (SI) data which forms a part of DVB bitstreams, in order that
the user can be provided with information to assist in selection of services and/or events within the bitstream, and so
that the Integrated Receiver Decoder (IRD) can automatically configure itself for the selected service. SI data for
automatic configuration is mostly specified within ISO/IEC 13818-1 [15] as Program Specific Information (PSI).
The present document specifies additional data which complements the PSI by providing data to aid automatic tuning of
IRDs, and additional information intended for display to the user. The manner of presentation of the information is not
specified in the present document, and IRD manufacturers have freedom to choose appropriate presentation methods.
It is expected that Electronic Programme Guides (EPGs) will be a feature of Digital TV transmissions.
The definition of an EPG is outside the scope of the present document (i.e. the SI specification), but the data contained
within the SI specified in the present document may be used as the basis for an EPG.
Rules of operation for the implementation of the present document are specified in ETSI TS 101 211 [i.1].

  • Standard
    194 pages
    English language
    sale 15% off
  • Standard
    194 pages
    English language
    sale 15% off
  • Standard
    194 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies technical characteristic and methods of measurements for terrestrial sound broadcasting
and digital TV broadcasting service transmitters, exciters, repeaters, active deflectors, On-Channel repeaters and any
associated ancillary equipment.
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
Technical specifications related to the antenna port emissions are not included in the present document. Such technical
specifications are found in the relevant product standards of ETSI for the effective use of the radio spectrum.
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence.
The present document may not cover those cases where a potential source of interference which is producing
individually repeated transient phenomena or continuous phenomena is permanently present, e.g. a radar site in the near
vicinity. In such a case it may be necessary to use special protection applied to either the source of interference or the
interfered part or both.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    24 pages
    English language
    sale 15% off

The present document specifies the method by which subtitles, logos and other graphical elements may be coded and
carried in DVB bitstreams. The system applies Colour Look-Up Tables (CLUTs) to define the colours of the graphical
elements. The transport of the coded graphical elements is based on the MPEG-2 Transport Stream described in
ISO/IEC 13818-1 [1].

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    85 pages
    English language
    sale 15% off
  • Standard
    85 pages
    English language
    sale 15% off

This part of IEC 60728 specifies the measuring methods, performance requirements and data
publication requirements for active wideband equipment of cable networks for television
signals, sound signals and interactive services.
This document
• applies to all amplifiers used in cable networks;
• covers the frequency range 5 MHz to 3 000 MHz;
NOTE The upper limit of 3 000 MHz is an example, but not a strict value.
• applies to one-way and two-way equipment;
• specifies the basic methods of measurement of the operational characteristics of the
active equipment in order to assess the performance of this equipment;
• identifies the performance specifications to be published by the manufacturers;
• states the minimum performance requirements of certain parameters.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies technical characteristics and methods of measurements for transmitter equipment for
broadcast sound services using the Digital Audio Broadcast (DAB) modulation system operating in VHF band III
(174 MHz to 240 MHz).
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    39 pages
    English language
    sale 15% off

The present document specifies technical characteristics and methods of measurements for transmitting equipment for
the Digital Radio Mondiale (DRM) sound broadcasting service operating in the LF band, MF band, HF band and VHF
band.
NOTE: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.1] is given in annex A.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    26 pages
    English language
    sale 15% off

The present document specifies the transport of TTML [2] subtitle streams in DVB MPEG-2 transport streams,
based on the MPEG-2 system described in ISO/IEC 13818-1 [1]. TTML is an XML-based representation. The present
document provides syntax for delivery of TTML subtitle streams over MPEG-2 transport stream, and is based on
EBU-TT-D [3] compatible with the IMSC1 [4] Text Profile of W3C TTML [2].

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    39 pages
    English language
    sale 15% off

NEW!IEC 60728-3:2017 is available as IEC 60728-3:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60728-3:2017 specifies the measuring methods, performance requirements and data publication requirements for active wideband equipment of cable networks for television signals, sound signals and interactive services. This fifth edition cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) extension of upper frequency range limit for cable network equipment in the forward path from 1 000 MHz to 1 218 MHz (optional up to 1 794 MHz); b) extension of upper frequency range limit for cable network equipment in the return path from 85 MHz to 204 MHz; c) integration and update of IEC 60728-3-1 content; d) integration and update of the Technical Specification CLC/TS 50083-3-3 content; e) deletion of specifications and test methods for obsolete analogue parameters; f) additional normative references; g) additional terms and definitions and abbreviations.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62766 specifies formats for the audio/video content provided by IPTV
services using fixed line access networks or mobile access networks and voice and video
telephony services. It does not apply to the broadcast channel input of hybrid devices except
where explicitly specified.
This part of IEC 62766 defines formats for the delivery of 3D video. At the present time,
delivery to fixed terminals is targeted. No special provision is made for mobile or portable
devices.
This standard defines the media formats utilised on the UNI reference point UNIT-17 of the
Open IPTV Forum functional architecture.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62766 specifies media formats for adaptive unicast content streaming over
HTTP.
Two HTTP adaptive streaming formats are specified. The first is based entirely on MPEG
DASH. The second is the OIPF “HTTP adaptive streaming” (HAS) format, which is based upon
3GPP’s release 9 adaptive HTTP streaming (AHS) format, with some profiling and extensions
to add the features of media components and support for MPEG-2 transport stream content
segment format. The latter format was specified before MPEG DASH had been published. It is
retained due to usage in some legacy applications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of IEC 62766 specifies the aspects concerning content metadata.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document establishes a standard method for transporting Service components (audio and data) produced by
Service providers at their own studios to the DAB multiplexing equipment located at the Ensemble provider's centre.
The present document is applicable to Collection Networks used in a DAB System. It describes the characteristics of a
signal suitable for transporting Service Components, Service Information and control data between a Service provider
and an Ensemble provider. The interface is suitable for use on a number of different physical media and
telecommunication networks. Provision is made for the inclusion of appropriate error detection and correction and for
the management of network transit delay.
This version of the present document has been aligned to V2.1.1 of ETSI EN 300 401 [1], by adding control for User
Application information.

  • Standard
    147 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    147 pages
    English language
    sale 15% off
  • Standard
    147 pages
    English language
    sale 15% off

IEC 60728-3:2017 is also available as IEC 60728-3:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 60728-3:2017 specifies the measuring methods, performance requirements and data publication requirements for active wideband equipment of cable networks for television signals, sound signals and interactive services. This fifth edition cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) extension of upper frequency range limit for cable network equipment in the forward path from 1000 MHz to 1218 MHz (optional up to 1794 MHz);
b) extension of upper frequency range limit for cable network equipment in the return path from 85 MHz to 204 MHz;
c) integration and update of IEC 60728-3-1 content;
d) integration and update of the Technical Specification CLC/TS 50083-3-3 content;
e) deletion of specifications and test methods for obsolete analogue parameters;
f) additional normative references;
g) additional terms and definitions and abbreviations.

  • Standard
    52 pages
    English language
    sale 15% off
  • Standard
    107 pages
    English and French language
    sale 15% off

IEC 61937-14:2017(E) describes the method to convey non-linear PCM bit streams encoded according to the AC-4 format.

  • Standard
    26 pages
    English language
    sale 15% off

The present document specifies technical characteristics and methods of measurements for digital terrestrial television
transmitters as defined in table 1.1 and in table 1.2. The output power classification (table 1.1) and emission
classification (table 1.2) are combined to define a transmitter category. For example, power classification H and
emission classification 0 denotes a high power transmitter (category H0) whose OOB emissions comply with a
non-critical mask.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English language
    sale 15% off

IEC 62766-8:2017(E) defines three example profiles that may be adopted for implementation in suitable devices.

  • Standard
    30 pages
    English language
    sale 15% off

IEC 62766-7:2017(E) specifies functions for content protection, service protection, service access protection, user identification, user authentication, and user authorisation.

  • Standard
    105 pages
    English language
    sale 15% off

IEC 62766-5-1:2017(E) specifies the Declarative Application Environment (DAE) component of the OIPF terminal function (OITF). The DAE is a declarative language based environment (browser) based on the OIPF web standards TV profile specified in IEC 62766-5-2 for the presentation of user interfaces and including scripting support for interaction with network server-side applications and access to the APIs of the other OITF functions.

  • Standard
    397 pages
    English language
    sale 15% off

IEC 62766-4-1:2017(E) specifies the protocols, which apply to the following reference point interfaces identified in the architecture described in Annex B of IEC 62766-1:2017.
- The UNI interfaces, between the consumer domain and the network or service provider domains.
- The HNI interfaces, between the functional entities in the consumer network domain.
- Interfaces to external systems, which include DLNA networks in the consumer domain.

  • Standard
    350 pages
    English language
    sale 15% off

IEC 62766-6:2017(E) specifies the procedural application environment (PAE) component of the OIPF terminal function (OITF). It also defines the UNI reference point UNIS-12 of the OIPF functional architecture summarised in Annex B of IEC 62766-1:2017.
The PAE is an application environment for IPTV services based on Java. Like other specifications such as OCAP, ACAP and Blu-ray, which are, or include, GEM terminal specifications, this document follows the structure of ETSI TS 102 728.

  • Standard
    57 pages
    English language
    sale 15% off

IEC 62766-5-2:2017(E) specifies a profile of HTML5, CSS and other related web technologies for connected TVs. Its goal is to describe a common profile that can be relied on by content and service providers and implemented by manufacturers. It does not describe extensions or modification to any of the referenced technologies but only tries to define a subset of web standards that are suitable and useful for TV deployments and at the same time stable enough to provide a good degree of confidence that real interoperability can be achieved. It may add clarifications and/or additional constraints where these are needed due to the nature of the target deployment environment.

  • Standard
    43 pages
    English language
    sale 15% off

The present document specifies technical characteristics and methods of measurements for transmitter equipment for
broadcast sound services using the frequency modulated sound broadcasting service operating in the frequency range
68 MHz to 108 MHz.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    34 pages
    English language
    sale 15% off

The present document specifies technical characteristics and methods of measurements for transmitter equipment for
broadcast sound services using the Double Side Band amplitude modulated sound broadcasting service operating in the
LF, MF and HF bands.
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    22 pages
    English language
    sale 15% off

The present document specifies the method by which ITU-R System B Teletext (Recommendation ITU-R BT.653 [3]),
also known as EBU Teletext (see ETSI EN 300 706 [4]), may be carried in DVB bitstreams. This transport mechanism
is intended to satisfy the following requirements:
• to support the transcoding of the Teletext data into the Vertical Blanking Interval (VBI) of analogue video.
The transcoded signal should be compatible with existing TV receivers with Teletext decoders;
• the maximum data rate for each Teletext service is equivalent to 16 lines per field so that the service is always
suitable for transcoding into the VBI;
• the transmission mechanism should be capable of transmitting subtitles with accurate timing with respect to
the video (i.e. to within or near frame accuracy).
A more general data transport mechanism for conveying new types of data services is outside the scope of the present
document, but the transport syntax specified here can also be adapted for other data.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    13 pages
    English language
    sale 15% off
  • Standard
    13 pages
    English language
    sale 15% off

IEC 62766-4-2:2017(E) provides informative examples of features defined in IEC 62766-4-1.

  • Standard
    88 pages
    English language
    sale 15% off

The present document covers amplifiers and indoor active antennas for broadcast TV and sound reception at UHF
(470 MHz to 790 MHz) and at VHF (174 MHz to 230 MHz).
The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU [i.1] under the
conditions identified in annex A.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English language
    sale 15% off
  • Standard
    29 pages
    English language
    sale 15% off

The present document establishes a broadcasting standard for the Digital Audio Broadcasting (DAB) system designed
for delivery of high-quality digital audio and video programmes and data services for mobile, portable and fixed
reception from terrestrial transmitters in the Very High Frequency (VHF) frequency bands as well as for distribution
through cable networks. The DAB system is designed to provide spectrum and power efficient techniques in terrestrial
transmitter network planning, known as the Single Frequency Network (SFN) and the gap-filling technique. The DAB
system meets the required sharing criteria with other radiocommunication services.
The present document defines the DAB transmission signal. It includes the coding algorithms for multiplexing of audio
and video programmes and data services, channel coding and modulation. Provision is also made for transmission of
additional data services which may be programme related or not, within the limit of the total system capacity. The
present document provides information on the system configuration which includes information about the ensembles,
services, service components and linking of them.
The present document describes the nominal characteristics of the emitted DAB signal. The aspects related to the
receiver design are outside the scope of the present document.

  • Standard
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    124 pages
    English language
    sale 15% off
  • Standard
    124 pages
    English language
    sale 15% off

IEC 62766-3:2016 specifies the aspects concerning content metadata.

  • Standard
    108 pages
    English and French language
    sale 15% off

IEC 62766-2-1:2016 specifies formats for the audio/video content provided by IPTV services using fixed line access networks or mobile access networks and voice and video telephony services. It does not apply to the broadcast channel input of hybrid devices except where explicitly specified.It defines formats for the delivery of 3D video. At the present time, delivery to fixed terminals is targeted. It defines the media formats utilised on the UNI reference point UNIT-17 of the Open IPTV Forum functional architecture.

  • Standard
    62 pages
    English and French language
    sale 15% off

IEC 62766-2-2:2016 specifies media formats for adaptive unicast content streaming over HTTP. Two HTTP adaptive streaming formats are specified. The first is based entirely on MPEG DASH. The second is the OIPF “HTTP adaptive streaming” (HAS) format, which is based upon 3GPP’s release 9 adaptive HTTP streaming (AHS) format, with some profiling and extensions to add the features of media components and support for MPEG-2 transport stream content segment format. The latter format was specified before MPEG DASH had been published. It is retained due to usage in some legacy applications.

  • Standard
    67 pages
    English and French language
    sale 15% off

IEC TR 60728-3-2:2016(E) is applicable to the measurement of 5th order non-linearity for active electronic equipment which carries only digitally modulated television signals, sound signals and signals for interactive services. This method of measurement is specifically applicable to MATV installations but could be applied to broadband and channel selective amplifiers used in all kinds of cable networks.

  • Technical report
    24 pages
    English language
    sale 15% off

The present document applies to ODUs for satellite broadcast reception from geostationary satellites in the frequency
band 10,7 GHz to 12,75 GHz. An ODU receives electromagnetic waves from a satellite. It amplifies the receive signal
at low noise, converts it to a lower frequency band and makes it available to the IDU on an interface.
Part of the IDU functionality may be integrated with the ODU. In that case the present document applies only to the
conventional ODU functionality.
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    23 pages
    English language
    sale 15% off

The present document describes a complete system that provides for enhanced interactive TV in the context of a
television service that uses the standards set out in the published ETSI specifications for digital TV. Applications for the
technology include programme guides, information services, games and enhanced TV services with synchronized
interactions and multiple content streams. The Profile identifies the minimum functionality that the receiver will need to
support.
The present document contains a number of clarifications related to streaming content and stream event handling and
various other changes to increase interoperability of implementations of the specification.

  • Standard
    292 pages
    English language
    sale 15% off
  • Standard
    285 pages
    English language
    sale 15% off
  • Standardization document
    292 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document applies to indoor units (IDUs) for satellite broadcast reception. An indoor unit gets on an input
interface the signal that has been received from satellite and processed by the outdoor unit (ODU). It performs carrier
selection, demodulation, audio and video decoding.
Part of the IDU functionality may be integrated with the ODU. In that case the present document applies to this part of
functionality as well as the remaining part in the IDU.
The indoor unit may be integrated with a domestic television receiver.
The present document contains requirements to demonstrate that radio equipment both effectively uses and supports the
efficient use of radio spectrum in order to avoid harmful interference.

  • Standard
    14 pages
    English language
    sale 15% off
  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies the Service Information (SI) data which forms a part of DVB bitstreams, in order that
the user can be provided with information to assist in selection of services and/or events within the bitstream, and so
that the Integrated Receiver Decoder (IRD) can automatically configure itself for the selected service. SI data for
automatic configuration is mostly specified within ISO/IEC 13818-1 [18] as Program Specific Information (PSI).
The present document specifies additional data which complements the PSI by providing data to aid automatic tuning of
IRDs, and additional information intended for display to the user. The manner of presentation of the information is not
specified in the present document, and IRD manufacturers have freedom to choose appropriate presentation methods.
It is expected that Electronic Programme Guides (EPGs) will be a feature of Digital TV transmissions.
The definition of an EPG is outside the scope of the present document (i.e. the SI specification), but the data contained
within the SI specified in the present document may be used as the basis for an EPG.
Rules of operation for the implementation of the present document are specified in ETSI TS 101 211 [i.2].c

  • Standard
    169 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    169 pages
    English language
    sale 15% off

The present document describes a baseline transmission system for digital terrestrial TeleVision (TV) broadcasting. It
specifies the channel coding/modulation system intended for digital multi-programme LDTV/SDTV/EDTV/HDTV
terrestrial services.
The scope is as follows:
- it gives a general description of the Baseline System for digital terrestrial TV;
- it identifies the global performance requirements and features of the Baseline System, in order to meet the
service quality targets;
- it specifies the digitally modulated signal in order to allow compatibility between pieces of equipment
developed by different manufacturers. This is achieved by describing in detail the signal processing at the
modulator side, while the processing at the receiver side is left open to different implementation solutions.
However, it is necessary in this text to refer to certain aspects of reception.
In order to address Handheld terminals (DVB-H) in annexes are provided:
- an additional 4K Mode offering supplementary options for network planning (annex F);
- an optional in-depth inner interleaver, to mitigate the effects of the high level of man-made noise affecting the
reception of DVB-H services (annex F);
- an extension of the Transmission Parameter Signalling (TPS) information for signalling DVB-H Services
(annex F);
- the transmission parameters to operate the transmission system in 5 MHz channel bandwidth, even outside of
the traditional broadcasting bands (annex G).

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document describes a second generation baseline transmission system for digital terrestrial television
broadcasting. It specifies the channel coding/modulation system intended for digital television services and generic data
streams.
The scope is as follows:
• it gives a general description of the Baseline System for digital terrestrial TV;
• it specifies the digitally modulated signal in order to allow compatibility between pieces of equipment
developed by different manufacturers. This is achieved by describing in detail the signal processing at the
modulator side, while the processing at the receiver side is left open to different implementation solutions.
However, it is necessary in this text to refer to certain aspects of reception.
Versions 1.1.1 and 1.2.1 of the present document [i.7] and [i.8] defined a single profile which incorporates time-slicing
but not time-frequency-slicing (TFS). Features which would allow a possible future implementation of TFS (for
receivers with two tuners/front-ends) can be found in annex E. It is not intended that a receiver with a single tuner
should support TFS.
Version 1.3.1 of the present document [i.9] added a T2-Lite profile. This profile is intended to allow simpler receiver
implementations for very low capacity applications such as mobile broadcasting, although it may also be received by
conventional stationary receivers. The details of this T2-Lite profile are described in annex I. Version 1.3.1 of the
present document [i.9] also introduces a name, which is 'T2-base profile', for the previous single profile.
Version 1.4.1 (the present document) made a number of changes, but all of these are clarifications of particular points,
changes in non-normative recommendations, and corrections to the wording; no new technical features have been added
and no changes have been made to existing features.

  • Standard
    188 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    188 pages
    English language
    sale 15% off
  • Standard
    193 pages
    English language
    sale 15% off

The present document describes a second generation baseline transmission system for digital television broadcasting via
Hybrid Fibre Coax (HFC) cable networks and Master Antenna Television (MATV) installations. It specifies the channel
coding, modulation and lower layer signalling protocol system intended for the provision of digital television services
and generic data streams.
The scope is as follows:
• it gives a general description of the Baseline System for digital cable TV;
• it specifies the digital signal processing in order to establish compatibility between pieces of equipment
developed by different manufacturers. This is achieved by describing in detail the signal processing at the
transmitting side, while the processing at the receiving side is left open to individual implementations.
However, for the purpose of securing interoperability it is necessary in this text to refer to certain
implementation aspects of the receiving end.

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    112 pages
    English language
    sale 15% off

This International Standard specifies the basic functions, interfaces, performance
requirements and test methods of the receivers for the Digital Terrestrial/Television
Multimedia Broadcasting (DTMB) system. This standard can be applied to digital television
terrestrial receivers carrying multiple SDTV programs or HDTV programs for both mobile and
stationary receptions.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies transport and encapsulation protocols, and signalling for carrying general purpose data
over DVB Transport Streams. The present document is designed to be used in conjunction with ETSI EN 300 468 [2].
Data broadcasting is an important extension of the MPEG-2 based DVB transmission standards. Examples are the
download of software over satellite, cable or terrestrial links, the delivery of Internet services over broadcast channels
(IP tunnelling), interactive TV, etc.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    78 pages
    English language
    sale 15% off
  • Standard
    78 pages
    English language
    sale 15% off

IEC 62753:2015(E) specifies the basic functions, interfaces, performance requirements and test methods of the receivers for the Digital Terrestrial/Television Multimedia Broadcasting (DTMB) system. This standard can be applied to digital television terrestrial receivers carrying multiple SDTV programs or HDTV programs for both mobile and stationary receptions.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day

The present document specifies the optional extensions of the S2 system, identified by the S2X denomination.

  • Standard
    135 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    135 pages
    English language
    sale 15% off
  • Standard
    139 pages
    English language
    sale 15% off

This International Standard describes the Radio Data System, RDS, intended for application
to VHF/FM sound broadcasts in the range 87,5 MHz to 108,0 MHz which may carry either
stereophonic (pilot-tone system) or monophonic programmes (as stated in ITU-R
Recommendation BS 450-3 and ITU-R Recommendation BS.643-3). The main objectives of
RDS are to enable improved functionality for FM receivers and to make them more userfriendly
by using features such as Programme Identification, Programme Service name
display and, where applicable, automatic tuning for portable and car radios, in particular. The
relevant basic tuning and switching information therefore has to be implemented by the type 0
group (see 6.1.5.1), and it is not optional unlike many of the other possible features in RDS.

  • Standard
    172 pages
    English language
    sale 10% off
    e-Library read for
    1 day