SIST EN ISO 4759-3:2001

Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)

Toleranzen für Verbindungselemente - Teil 3: Flache Scheiben für Schrauben und Muttern - Produktklassen A und C (ISO 4759-3:2000)

Dieser Teil von ISO 4759 enthält eine Auswahl von Toleranzen zur Anwendung bei der Erstellung von ISO-Produktnormen für gestanzte flache Scheiben, Produktklassen A und C, für die Verwendung mit Schrauben und Muttern mit Gewinde-Nenndurchmessern von 1 mm bis 150 mm. Es wird empfohlen, diese Toleranzen auch für nicht genormte Scheiben anzuwenden. ANMERKUNG 1: Die Produktklasse bezieht sich auf die Qualität der Produkte und auf die Größe der Toleranzen. Der informative Anhang A enthält Toleranzen aus ISO 286-1 und ISO 286-2.

Tolérances pour éléments de fixation - Partie 3: Rondelles Plates pour vis et écrous - Grades A et C (ISO 4759-3:2000)

La présente partie de l'ISO 4759 établit une sélection des tolérances à utiliser dans la préparation des normes de produits ISO concernant les rondelles plates de grades A et C pour les vis et les écrous de diamètre nominal de filetage de 1 mm à 150 mm inclus.Il est recommandé d'employer également ces tolérances pour les rondelles non normalisées.NOTE : Les grades se rapportent à la qualité du produit et à la grandeur des tolérances.L'annexe A (informative) donne les tolérances issues de l'ISO 286-1 et de l'ISO 286-2.

Tolerance za mehanske vezne elemente - 3. del: Ravne podložke za vijake in matice - Razreda izdelave A in C (ISO 4759-3: 2000)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-2001
• Withdrawal Date: 13-Jul-2016
• ICS: 21.060.30 - Washers, locking elements
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 14-Jul-2016
• Due Date: 06-Aug-2016
• Completion Date: 14-Jul-2016
• Ref Project: EN ISO 4759-3:2000 - Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)

Relations

• Replaced By: SIST EN ISO 4759-3:2016 - Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
• Effective Date: 01-Sep-2016
• Replaced By: SIST EN ISO 4759-3:2016 - Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016)
• Effective Date: 08-Jun-2022
• Replaces: SIST ISO 4759-3:1996 - Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm -- Product grades A and C
• Effective Date: 01-Jul-2001

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tolerance za mehanske vezne elemente - 3. del: Ravne podložke za vijake in matice - Razreda izdelave A in C (ISO 4759-3: 2000)Toleranzen für Verbindungselemente - Teil 3: Flache Scheiben für Schrauben und Muttern - Produktklassen A und C (ISO 4759-3:2000)Tolérances pour éléments de fixation - Partie 3: Rondelles Plates pour vis et écrous - Grades A et C (ISO 4759-3:2000)Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)21.060.30Podložke, varovalni elementiWashers, locking elementsICS:Ta slovenski standard je istoveten z:EN ISO 4759-3:2000SIST EN ISO 4759-3:2001en01-julij-2001SIST EN ISO 4759-3:2001SLOVENSKI
STANDARDSIST ISO 4759-3:19961DGRPHãþD



SIST EN ISO 4759-3:2001



SIST EN ISO 4759-3:2001



SIST EN ISO 4759-3:2001



SIST EN ISO 4759-3:2001



SIST EN ISO 4759-3:2001



ReferencenumberISO4759-3:2000(E)©ISO2000INTERNATIONALSTANDARDISO4759-3Thirdedition2000-05-01Tolerancesforfasteners—Part3:Plainwashersforbolts,screwsandnuts—ProductgradesAandCTolérancespourélémentsdefixation—Partie3:Rondellesplatespourvisetécrous—GradesAetCSIST EN ISO 4759-3:2001



ISO4759-3:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2000Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostal[e-mail]©ISO2000–AllrightsreservedSIST EN ISO 4759-3:2001



ISO4759-3:2000(E)©ISO2000–AllrightsreservediiiForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhastherighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,inliaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnicalCommission(IEC)onallmattersofelectrotechnicalstandardization.InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3.DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting.PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote.AttentionisdrawntothepossibilitythatsomeoftheelementsofthispartofISO4759maybethesubjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights.InternationalStandardISO4759-3waspreparedbyTechnicalCommitteeISO/TC2,Fasteners.Thisthirdeditioncancelsandreplacesthesecondedition(ISO4759-3:1991),ofwhichhasbeentechnicallyrevised.ISO4759consistsofthefollowingparts,underthegeneraltitle,Tolerancesforfasteners:—Part1:Bolts,screws,studsandnuts—ProductgradesA,BandC—Part2:Bolts,screwsandnutswiththreaddiametersfrom1upto3mmandproductgradeF,forfinemechanics—Part3:Plainwashersforbolts,screwsandnuts—ProductgradesAandCAnnexAofthispartofISO4759isforinformationonly.SIST EN ISO 4759-3:2001



SIST EN ISO 4759-3:2001



INTERNATIONALSTANDARDISO4759-3:2000(E)©ISO2000–Allrightsreserved1Tolerancesforfasteners—Part3:Plainwashersforbolts,screwsandnuts—ProductgradesAandC1ScopeThispartofISO4759establishesaselectionoftolerancesforuseinthepreparationofISOproductstandardsforpunchedplainwashersofproductgradesAandC,forusewithbolts,screwsandnutsofnominalthreaddiametersoffrom1mmto150mminclusive.Itisrecommendedthatthesetolerancesalsobeusedfornon-stand
...