SIST EN 23661:2000
(Main)End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)
End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)
Basic baseplate and installation dimensions for end-suction centrifugal pumps, mainly ISO 2858 pumps, coupled to foot-mounted electric motors.
Kreiselpumpen mit axialem Eintritt - Grundplatten- und Einbau-Maße
Pompes centrifuges a aspiration en bout - Dimensions relatives aux socles et a l'installation (ISO 3661:1977)
La présente Norme Internationale fixe les dimensions fondamentales relatives aux socles et à l'installation des pompes centrifuges à aspiration en bout. Des variantes sont données pour le nombre et l'emplacement des trous de fixation des socles pouvant convenir à des installations particulières.
Les dimensions et autres informations données dans la présente Norme Internationale sont principalement prévues pour les pompes centrifuges conformes à l'ISO 2858, couplées avec des moteurs électriques montés sur pied pour installation sur socle. La présente Norme Internationale peut, le cas échéant, être utilisée pour d'autres types de pompes.
End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)Kreiselpumpen mit axialem Eintritt - Grundplatten- und Einbau-MaßePompes centrifuges a aspiration en bout - Dimensions relatives aux socles et a l'installation (ISO 3661:1977)End-suction centrifugal pumps - Baseplate and installation dimensions (ISO 3661:1977)23.080ýUSDONHPumpsICS:Ta slovenski standard je istoveten z:EN 23661:1993SIST EN 23661:2000en01-december-2000SIST EN 23661:2000SLOVENSKI
STANDARD
SIST EN 23661:2000
SIST EN 23661:2000
SIST EN 23661:2000
SIST EN 23661:2000
SIST EN 23661:2000
INTERNATIONAL STANDARD. INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPO,ljHAJl OPI-AHW3AUMR l-f0 CTAHAAPTM3ALWWi~ORGANISATiON INTERNATIONALE DE NORMALISATION End-suction centrifugal Pumps - Baseplate and installation dimensions Pompes ten trifuges 2 aspiration en bout - Dimensions relatives aux socles et a I’instaIIation First edition - 1977-02-15 UDC 621.671 Ref. No. ISO 36614977 (E) Descriptors : centrifugal Pumps, specifications, holders, installing, dimensions. Price based on 3 pages SIST EN 23661:2000
FOREWORD ISO (the International Organization for Standardization) is a worldwide federation of national Standards institutes (ISO Member Bodies). The work of deveioping International Standards is carried out through lS0 Technical Committees. Every Member Body interested in a subject for which a Jechnical Committee has been set up has the right to be represented on that Committee. International organizations, governmental and non-governmental, in Iiaison with ISO, also take part in the work. Draft International Standards adopted by the Technical Committees are circulated PO the Member Bodies for approvaf before their acceptance as International Standards by the ISO Council. International Standard ISO 3661 was drawn up by Technical Committee lSO/TC 115, Pumps, and was circulated to the Member Bodies in February 1975. lt has been approved by the Member Bodies of the following countries : Belgium Brazil Czechoslovakia France Germany Hungary Israel Italy Mexico Netherlands Poland Romania South Africa, Rep. of Spain Sweden Switzerland Turkey United Mingdom Yugoslavia The Member Bodies of the doll document on technica I grounds : lowing countries exp Australia Canada Japan U.S. A. disapproval of the Q International Organkation for Standardination, 1937 @ Printed in Switze:!and SIST EN 23661:2000
INTERNATIONAL STANDARD ISO 3661-1977 (E) End-suction centrifugal Pumps - Baseplate and installation dimensions 1 SCOPE This international Standard specifies the basic baseplate and installation dimensions for end-suction centrifugal Pumps. Alternative numbers and locations of baseplate fixing holes are given to suit individual installations. 2 FIELD OF APPLICATION The dimensions and other data given in this International Standard are intended primarily for use with centrifugal Pumps in accordance with ISO 2858, coupled to foot- mounted electric motors for installation on a foundation. Where suitable, this International Standard may be used for other types of pump. 3 REFERENCES ISO/R 273, Clearance holes for metric bolts. ISO 2858, End-suction centrifugal Pumps (rating 16 bar) - Designation, nominal duty poin t and dimensions, IEC Publication 72, Dimensions and output ratings for rotating electrical machines - Frame numbers 56
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.