SIST EN ISP 10612-8:1997

Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 8: Profile RD53.53 (Token Ring LAN - Token Ring LAN) (ISO/IEC ISP 10612-8:1995)

Informationstechnik - Internationale Profilnorm RD - Transparente Relais-Funktion in der MAC-Teilschicht - Teil 8: Profil RD53.53 (Token-Ring-LAN - Token-Ring-LAN) (ISO/IEC ISP 10612-8:1995)

Technologies de l'information - Profil normalisé international RD - Transmission du service MAC utilisant un pontage transparent - Partie 8: Profil RD53.53 (RLE en anneau a jeton - RLE en anneau a jeton) (ISO/IEC ISP 10612-8:1995)

Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 8: Profile RD53.53 (Token Ring LAN - Token Ring LAN) (ISO/IEC ISP 10612-8:1995)

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-1997
• Withdrawal Date: 30-Sep-2003
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: ITC - Information technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Oct-2003
• Due Date: 01-Oct-2003
• Completion Date: 01-Oct-2003
• Ref Project: EN ISP 10612-8:1996 - Information technology - International Standardized Profile RD - Relaying the MAC service using transparent bridging - Part 8: Profile RD53.53 (Token Ring LAN - Token Ring LAN) (ISO/IEC ISP 10612-8:1995)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISP 10612-8:1997
01-december-1997
Information technology - International Standardized Profile RD - Relaying the MAC
service using transparent bridging - Part 8: Profile RD53.53 (Token Ring LAN -
Token Ring LAN) (ISO/IEC ISP 10612-8:1995)
Information technology - International Standardized Profile RD - Relaying the MAC
service using transparent bridging - Part 8: Profile RD53.53 (Token Ring LAN - Token
Ring LAN) (ISO/IEC ISP 10612-8:1995)
Informationstechnik - Internationale Profilnorm RD - Transparente Relais-Funktion in der
MAC-Teilschicht - Teil 8: Profil RD53.53 (Token-Ring-LAN - Token-Ring-LAN) (ISO/IEC
ISP 10612-8:1995)
Technologies de l'information - Profil normalisé international RD - Transmission du
service MAC utilisant un pontage transparent - Partie 8: Profil RD53.53 (RLE en anneau
a jeton - RLE en anneau a jeton) (ISO/IEC ISP 10612-8:1995)
Ta slovenski standard je istoveten z: EN ISP 10612-8:1996
ICS:
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN ISP 10612-8:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISP 10612-8:1997

---------------------- Page: 2 ----------------------

SIST EN ISP 10612-8:1997

---------------------- Page: 3 ----------------------

SIST EN ISP 10612-8:1997

---------------------- Page: 4 ----------------------

SIST EN ISP 10612-8:1997
INTERNATIONAL
ISO/IEC
STANDARDIZED
ISP
PROFILE
10612-8
First edition
1995-06-15
Information technology - International
Standardized Profile RD - Relaying the
MAC Service using transparent bridging -
Part 8:
Profile RD53.53 (Token Ring LAN - Token
Ring LAN)
Technologies de I ’informa tion
- Profil normal& international RD -
Transmission du Service MAC utilisant un pon tage transparent -
Partie 8: Profil RD53.53 (RLE en anneau 3 jeton - RLE en anneau 2 jeton)
Reference number
ISO/IEC ISP 1061 Z-8:1995(E)

---------------------- Page: 5 ----------------------

SIST EN ISP 10612-8:1997
ISO/IEC ISP 10612=8:1995(E)
Page
Contents
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
1
1 scope .
................................ 1
1.1 General
................ 1
1.2 Position within the taxonomy
............................... 1
1.3 Scenario
2
2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
4 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
............................... 3
5 Requirements
.............. 3
5.1 Static conformance requirements
............ 3
5.2 Dynamit conformance requirements
............. 4
Annex A: ISPICS requirements list (normative)
................ 4
A-1 General Options of the Profile
A-2 Base Standards selected and combined in the
4
Profile .
................ 4
A-3 Constraints on base Standards
0 ISO/IEC 1995
All rights reserved. Unless otherwise specified, no part of this publication may be
reproduced or utilized in any form or by any means, electronie or mechanical,
including photocopying and microfihn, without Permission in writing from the
publisher.
ISO/IEC Copyright Office - Case postale 56 l CH-121 1 GenGve - Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISP 10612-8:1997
0 ISO/IEC ISO/IEC ISP 10612=8:1995(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the
International Electrotechnical Commission) form the specialized System for
worldwide standardization. National bodies that are members of ISO or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. ISO and IEC technical
committees collaborate in fields of mutual interest. Other international
organizations, govemmental and non-govemmental, in liaison with ISO
and IEC, also take part in the work.
In the field of information technology, ISO and IEC have established a
joint technical committee, ISO/IEC JTC 1. In addition to developing
International Standards, ISOLIEC JTC 1 has created a Special Group on
Functional Standardization for the processing of International Standardized
Profiles.
An International Standardized Profile is an intemationally agreed,
harmonized document which identifies a Standard or group of Standards,
together with Options and Parameters, necessary to accomplish a function
or a set of functions.
Draft International Standardized Profiles are circulated to national bodies
for voting. Publication as an International Standardized Profile requires
approval by at least 75 % of the national bodies casting a vote.
International Standardized Profile ISO/IEC ISP 106 12-8 was prepared with
the collaboration of
- Asia-Oceania Workshop (AOW);
- European Workshop for Open Systems (EWOS);
- Open Systems Environment Implernentors’ Workshop (OIW).
ISOLIEC ISP 10612 consists of several Parts, under the general title
Information technology -International Standardized Projle RD - Relaying
the MAC Service using transparent bridging:
- Part 1: Subnetwork-independent requirements
- Part 2: CSMAKD LAN subnetwork-dependent,
media-dependent requirements
- Part 3: Token Ring LAN subnetwork-dependent,
media-dependent requirements
- Part 4: ProJile RD51.51 (CSMAKD LAN - CSMA/CD
LAN)
. . .
111

---------------------- Page: 7 ----------------------

SIST EN ISP 10612-8:1997
ISO/IEC ISP 10612=8:1995(E) 0 ISO/IEC
- Part 5: Profile RD51.54 (CSMAKD LAN - FDDI LAN)
- Part 6: Profile RD54.54 (FDDI LAN - FDDI LAN)
- Part 7: Profile RD.51.53 (CSMAKD LAN - Tokm Ring
LAN)
- Part 8: Profile RL153.53 (Tokm Ring LAN - Tokm Ring
LAN)
- Part 9: Profile RD53.54 (Koken Ring LAN - FDDI LAN)
Annex A forms an integral part of this part of ISO/IEC ISP 10612.
iv

---------------------- Page: 8 ----------------------

SIST EN ISP 10612-8:1997
0 ISO/IEC ISO/IEC ISP 10612=8:1995(E)
Introduction
ISOLIEC ISP 10612 is defined in accordance with the principles specified
by ISOLIEC TR 10000. The context of Functional Standardization is one
area in the Overall field of Information Technology (IT) standardization
activities, covering base Standards, profiles, and registration mechanisms.
A Profile defines a combination of base Standards that collectively perform
a specific well-defined IT function. Profiles standardize the use of Options
and other variations in the base Standards, and provide a basis for the
development of uniform, intemationally recognized System tests.
ISPs are produced not simply to ‘legitimize’ a particular choice of base
Standards and Options, but to
...