iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 738-3:2000

(Main)

Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves

Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves

This European Standard applies to pressure regulators integrated with cylinder valves intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients for use with the following medical gases:  - oxygen; - nitrous oxide; - air for breathing; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools.  The pressure regulators are intended to be fitted to high pressure cylinders with filling pressure up to 20 000 kPa, and can be provided with devices which control and measure the flow of the medical gas delivered to the patient.

Druckminderer zur Verwendung mit medizinischen Gasen - Teil 3: Druckminderer in Flaschenventilen

Diese Europäische Norm gilt für Druckminderer in Flaschenventilen zur Verabreichung der folgenden medizinischen Gase bei Behandlung, Management,Diagnosebewertung und Pflege von Patienten: - Sauerstoff; - Lachgas; - Luft für Beatmungßwecke; - Helium; Kohlenstoffdioxid; - Xenon; spezifische Gemische der oben genannten Gase; Luft zum Betreiben chirurgischer Werkzeuge; Stickstoff zum Betreiben chirurgischer Werkzeuge.

Détendeurs pour l'utilisation avec les gaz médicaux - Partie 3: Détendeurs intégrés dans les robinets de bouteilles

La présente norme européenne s'applique aux détendeurs intégrés dans les robinets de bouteilles, destinés a administrer des gaz médicaux dans le cadre du traitement, de la gestion, de l'évaluation diagnostique et du soin aux patients, et utilisés avec les gaz médicaux suivants: - l'oxygene; - le protoxyde d'azote; -  l'air respirable; - l'hélium; - le dioxyde de carbone; - le xénon; - les mélanges spécifiques des gaz cités ci-dessus; - l'air pour les instruments chirurgicaux; l'azote pour les instruments chirurgicaux.

Tlačni regulatorji za medicinske pline - 3. del: Tlačni regulatorji v sklopu ventilov jeklenk

General Information

Status
Withdrawn
Publication Date
31-Dec-1999
Withdrawal Date
30-Jun-2006
ICS
11.040.10 - Anaesthetic, respiratory and reanimation equipment
23.060.40 - Pressure regulators
Technical Committee
VAZ - Healthcare
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jul-2006
Due Date
01-Jul-2006
Completion Date
01-Jul-2006
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
EN 738-3:1998 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves

Relations

Replaced By
SIST EN ISO 10524-3:2006 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005)
Effective Date
01-Jul-2006
Amended By
SIST EN 738-3:2000/A1:2002 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
Effective Date
22-Dec-2008
Parent
SIST EN 738-1:2000 - Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices
Effective Date
22-Dec-2008

Buy Standard

EN 738-3:2000EN 738-3:2000
PreviousNext
Standard
EN 738-3:2000
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 738-3:2000
01-januar-2000
7ODþQLUHJXODWRUML]DPHGLFLQVNHSOLQHGHO7ODþQLUHJXODWRUMLYVNORSXYHQWLORY
MHNOHQN
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated
with cylinder valves
Druckminderer zur Verwendung mit medizinischen Gasen - Teil 3: Druckminderer in
Flaschenventilen
Détendeurs pour l'utilisation avec les gaz médicaux - Partie 3: Détendeurs intégrés dans
les robinets de bouteilles
Ta slovenski standard je istoveten z: EN 738-3:1998
ICS:
11.040.10 Anestezijska, respiratorna in Anaesthetic, respiratory and
reanimacijska oprema reanimation equipment
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN 738-3:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 738-3:2000

---------------------- Page: 2 ----------------------

SIST EN 738-3:2000

---------------------- Page: 3 ----------------------

SIST EN 738-3:2000

---------------------- Page: 4 ----------------------

SIST EN 738-3:2000

---------------------- Page: 5 ----------------------

SIST EN 738-3:2000

---------------------- Page: 6 ----------------------

SIST EN 738-3:2000

---------------------- Page: 7 ----------------------

SIST EN 738-3:2000

---------------------- Page: 8 ----------------------

SIST EN 738-3:2000

---------------------- Page: 9 ----------------------

SIST EN 738-3:2000

---------------------- Page: 10 ----------------------

SIST EN 738-3:2000

---------------------- Page: 11 ----------------------

SIST EN 738-3:2000

---------------------- Page: 12 ----------------------

SIST EN 738-3:2000

---------------------- Page: 13 ----------------------

SIST EN 738-3:2000

---------------------- Page: 14 ----------------------

SIST EN 738-3:2000

---------------------- Page: 15 ----------------------

SIST EN 738-3:2000

---------------------- Page: 16 ----------------------

SIST EN 738-3:2000

---------------------- Page: 17 ----------------------

SIST EN 738-3:2000

---------------------- Page: 18 ----------------------

SIST EN 738-3:2000

---------------------- Page: 19 ----------------------

SIST EN 738-3:2000

---------------------- Page: 20 ----------------------

SIST EN 738-3:2000

--------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10524-3:2019(Main)
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
EN ISO 10524-3:2019

This document specifies design, type testing, and marking requirements for cylinder valves with
integrated pressure regulators [as defined in 3.26 and referred to hereafter as valves with
integrated pressure regulators (VIPRs)] intended for the administration of medical gases in
the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to VIPRs mounted on refillable cylinders with a working pressure up to
30 000 kPa (300 bar) intended to be filled in cylinder filling facilities or on self-filling systems as used
in homecare applications.
VIPRs covered by this document are pressure pre-set and provided with a pressure outlet and/or
pre-set flow outlet(s).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-1:2019(Main)
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
EN ISO 10524-1:2019

This document specifies the design, construction, type testing, and marking requirements for pressure
regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures
in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to pressure regulators:
a) intended to be connected to cylinders by the operator;
b) with integral flow-metering devices intended to be connected to cylinders by the operator;
c) that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators,
resuscitators).
A pressure regulator can be provided with pressure outlet or flow outlet, and can be adjustable
or pre-set.
pressure regulators are intended to be fitted to refillable cylinders with a working pressure up
to 30 000 kPa ( 300 bar) and can be provided with devices which control and measure the flow of the
medical gas delivered.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-2:2019(Main)
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
EN ISO 10524-2:2019

This document specifies design, construction, type testing, and marking requirements for manifold
pressure regulators (as defined in 3.7) and line pressure regulators (as defined in 3.5) intended
for use in medical gas pipeline systems.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to manifold pressure regulators and line pressure regulators supplied
as individual units or to the relevant components incorporated within an assembly.
Manifold pressure regulators are intended to be connected to a manifold system which has a
nominal inlet pressure, P1 of up to 30 000 kPa (300 bar).
Line pressure regulators are intended to be connected downstream of the manifold pressure
regulator with a supply pressure up to 3 000 kPa (30 bar).
This document does not apply to pressure regulators for use with vacuum pipeline systems.
NOTE Requirements for pressure regulators for use with vacuum pipeline systems are covered in
ISO 10079-3.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-4:2008
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
EN ISO 10524-4:2008

This part of ISO 10524 applies to the types of low-pressure regulators listed in 1.2 and intended to be used with the following medical gases in the treatment, management, diagnostic evaluation and care of patients: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools; - oxygen-enriched air. The types of low-pressure regulators covered by this part of ISO 10524 are as follows: a) low-pressure regulators intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; c) low-pressure regulators intended to be connected to terminal units attached to pressure regulators complying with ISO 10524-1 or ISO 10524-3; d) operator-adjustable low-pressure regulators for air or nitrogen for driving surgical tools that are an integral part of a medical gas pipeline system complying with ISO 7396-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-1:2019/oprA1:2023(Amendment)
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/DAM 1:2023)
EN ISO 10524-1:2019/prA1
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 407:2023(Main)
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2023)
EN ISO 407:2023

This document is applicable to pin-index yoke-type valve connections for medical gas cylinders, with a working pressure up to a maximum of 200 bar or test pressure up to a maximum of 300 bar, or both.
NOTE 1    This type of connection is primarily used for small cylinders (5 l or below).
NOTE 2    In this document the unit bar is used, due to its universal use in the field of technical gases. It should, however, be noted that bar is not an SI unit, and that the corresponding SI unit for pressure is Pa (1 bar = 105 Pa = 105 N/m2).
This document specifies:
—    basic dimensions;
—    requirements for alternative designs of the yoke-type valve connections;
—    dimensions and positions for the holes and pins for the outlet connections.
It also specifies the dimensions and positions for the holes and pins for the outlet connections for gases and gas mixtures.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-2:2019(Main)
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
EN ISO 10524-2:2019

This document specifies design, construction, type testing, and marking requirements for manifold
pressure regulators (as defined in 3.7) and line pressure regulators (as defined in 3.5) intended
for use in medical gas pipeline systems.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to manifold pressure regulators and line pressure regulators supplied
as individual units or to the relevant components incorporated within an assembly.
Manifold pressure regulators are intended to be connected to a manifold system which has a
nominal inlet pressure, P1 of up to 30 000 kPa (300 bar).
Line pressure regulators are intended to be connected downstream of the manifold pressure
regulator with a supply pressure up to 3 000 kPa (30 bar).
This document does not apply to pressure regulators for use with vacuum pipeline systems.
NOTE Requirements for pressure regulators for use with vacuum pipeline systems are covered in
ISO 10079-3.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-1:2019(Main)
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
EN ISO 10524-1:2019

This document specifies the design, construction, type testing, and marking requirements for pressure
regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures
in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to pressure regulators:
a) intended to be connected to cylinders by the operator;
b) with integral flow-metering devices intended to be connected to cylinders by the operator;
c) that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators,
resuscitators).
A pressure regulator can be provided with pressure outlet or flow outlet, and can be adjustable
or pre-set.
pressure regulators are intended to be fitted to refillable cylinders with a working pressure up
to 30 000 kPa ( 300 bar) and can be provided with devices which control and measure the flow of the
medical gas delivered.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-3:2019(Main)
Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
EN ISO 10524-3:2019

This document specifies design, type testing, and marking requirements for cylinder valves with
integrated pressure regulators [as defined in 3.26 and referred to hereafter as valves with
integrated pressure regulators (VIPRs)] intended for the administration of medical gases in
the treatment, management, diagnostic evaluation and care of patients or for gases used for driving
surgical tools.
Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures.
This document applies to VIPRs mounted on refillable cylinders with a working pressure up to
30 000 kPa (300 bar) intended to be filled in cylinder filling facilities or on self-filling systems as used
in homecare applications.
VIPRs covered by this document are pressure pre-set and provided with a pressure outlet and/or
pre-set flow outlet(s).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10524-4:2008
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008)
EN ISO 10524-4:2008

This part of ISO 10524 applies to the types of low-pressure regulators listed in 1.2 and intended to be used with the following medical gases in the treatment, management, diagnostic evaluation and care of patients: - oxygen; - nitrous oxide; - medical air; - helium; - carbon dioxide; - xenon; - specified mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools; - oxygen-enriched air. The types of low-pressure regulators covered by this part of ISO 10524 are as follows: a) low-pressure regulators intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of complying with ISO 7396-1; b) low-pressure regulators with integral flow-metering devices intended to be connected to terminal units of medical gas pipeline systems complying with ISO 7396-1; c) low-pressure regulators intended to be connected to terminal units attached to pressure regulators complying with ISO 10524-1 or ISO 10524-3; d) operator-adjustable low-pressure regulators for air or nitrogen for driving surgical tools that are an integral part of a medical gas pipeline system complying with ISO 7396-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day