SIST EN 3841-100:2005
(Main)Aerospace series - Circuit breakers - Test methods - Part 100: General
Aerospace series - Circuit breakers - Test methods - Part 100: General
This standard specifies the general conditions for test methods applicable to circuit breakers.
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 100: Allgemeines
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 100 : Généralités
La présente norme spécifie les conditions générales des méthodes d'essais applicables aux disjoncteurs.
Aeronavtika - Odklopniki - Preskusne metode - 100. del: Splošno
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3841-100:2005
01-april-2005
Aeronavtika - Odklopniki - Preskusne metode - 100. del: Splošno
Aerospace series - Circuit breakers - Test methods - Part 100: General
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 100: Allgemeines
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 100 : Généralités
Ta slovenski standard je istoveten z: EN 3841-100:2004
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3841-100:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3841-100:2005
---------------------- Page: 2 ----------------------
SIST EN 3841-100:2005
EUROPEAN STANDARD
EN 3841-100
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 49.060
English version
Aerospace series - Circuit breakers - Test methods - Part 100:
General
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil
Partie 100 : Généralités 100: Allgemeines
This European Standard was approved by CEN on 10 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3841-100:2004: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3841-100:2005
EN 3841-100:2004 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Definitions .4
4 Conditions for test.4
5 List of test methods.5
2
---------------------- Page: 4 ----------------------
SIST EN 3841-100:2005
EN 3841-100:2004 (E)
Foreword
This document (EN 3841-100:2004) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.