Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1 version 4.20.1)

SUBJECT CBCH Mobile Allocation IE not needed in SYS INFO 4 in Test 34.3 Section 26.11 - Coding of SI Type 2ter and 5ter in defaults and 26.11.2.3 Section 26.11.3.1.2.3 - Initial condition of MS Section 21.3 RXQUAL_SUB with DTX Clarification that for cell to be made not suitable C1 must be made < 0 Section 26.6.4.1.3 - Expected sequence step B25) Multiband BCCH / Intracell Handover - Interband Assignment Section 31 , allow DTMF signalling in SS tests  Section 34 , correction of defaults RP_ERROR  Section 36.2.1.1.1 - Loop A and FACCH Clarification of Test equipment level accuracy for cell (re) selection tests Multiband BCCH / Intercell Handover Section 14.6.2 and 14.8.2 - Control Channels - Delete Loop Back

Digitalni celični telekomunikacijski sistem (faza 2) - Specifikacija skladnosti mobilne postaje (MS) - 1. del: Specifikacija skladnosti (GSM 11.10-1, različica 4.20.1)

General Information

Status
Published
Publication Date
31-Jan-2005
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Feb-2005
Due Date
01-Feb-2005
Completion Date
01-Feb-2005
Mandate

Buy Standard

Standard
ETS 300 607-1 E7:2005
English language
1463 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 607-1 E7:2005
01-februar-2005
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHP ID]D 6SHFLILNDFLMDVNODGQRVWL
PRELOQHSRVWDMH 06 GHO6SHFLILNDFLMDVNODGQRVWL *60UD]OLþLFD

Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS)
conformance specification; Part 1: Conformance specification (GSM 11.10-1 version
4.20.1)
Ta slovenski standard je istoveten z: ETS 300 607-1 Edition 7
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST ETS 300 607-1 E7:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 607-1 E7:2005

---------------------- Page: 2 ----------------------

SIST ETS 300 607-1 E7:2005
EUROPEAN ETS 300 607-1
TELECOMMUNICATION April 1998
STANDARD Seventh Edition
Source: SMG Reference: RE/SMG-07111OPR5-1
ICS: 33.020
Key words: Digital cellular telecommunications system, Global System for Mobile Communication (GSM)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS
Digital cellular telecommunications system (Phase 2);
Mobile Station (MS) conformance specification;
Part 1: Conformance specification
(GSM 11.10-1 version 4.20.1)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: secretariat@etsi.fr - http://www.etsi.fr - http://www.etsi.org
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 607-1 E7:2005
Page 2
ETS 300 607-1 (GSM 11.10-1 version 4.20.1): April 1998
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Standards Approval Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 607-1 E7:2005
Page 3
ETS 300 607-1 (GSM 11.10-1 version 4.20.1): April 1998
Contents
Foreword . 29
1 Scope. 31
2 Normative references . 31
3 Definitions, conventions, and applicability. 37
3.1 Mobile station definition and configurations. 37
3.2 Applicability. 38
3.2.1 Applicability of this specification. 38
3.2.2 Applicability of the individual tests. 38
3.2.3 Applicability to terminal equipment. 58
3.3 Definitions. 58
3.4 Conventions for mathematical notations . 59
3.4.1 Mathematical signs . 59
3.4.2 Powers to the base 10 . 59
3.5 Conventions on electrical terms . 59
3.5.1 Radio Frequency (RF) input signal level. 59
3.5.2 Reference sensitivity level. 59
3.5.3 Power level of fading signal . 60
3.6 Terms on test conditions . 60
3.6.1 Radio test conditions. 60
4 Test Equipment. 60
4.1 Terms used to describe test equipment in this ETS. 60
4.2 Functional requirements of test equipment . 61
5 Testing methodology in general (layers 1, 2, and 3). 61
5.1 Testing of optional functions and procedures. 61
5.2 Test interfaces and facilities. 61
5.3 Different protocol layers. 62
5.4 Information to be provided by the apparatus supplier . 62
5.5 Definitions of transmit and receive times. 62
6 Reference test methods. 62
6.1 General. 62
6.2 Choice of frequencies in the frequency hopping mode . 62
6.3 "Ideal" radio conditions . 63
6.4 Standard test signals. 63
6.5 Power (control) levels. 63
7 Implicit testing . 63
8 Measurement uncertainty . 63
9 Format of tests. 64
10 Generic call set up procedures . 64
10.1 Generic call set-up procedure for mobile terminating speech calls. 64
10.2 Generic call set-up procedure for mobile originating speech calls. 69
10.3 Generic call set-up procedure for mobile terminating data calls . 72
10.4 Generic call set-up procedure for mobile originating data calls. 75
11 General tests. 79
11.1 Verification of support and non-support of services (multiple numbering scheme or
ISDN). 79

---------------------- Page: 5 ----------------------

SIST ETS 300 607-1 E7:2005
Page 4
ETS 300 607-1 (GSM 11.10-1 version 4.20.1): April 1998
11.1.1 Mobile Terminated (MT) calls.79
11.1.2 Mobile Originated (MO) calls.80
11.2 Verification of support of the single numbering scheme.81
11.3 Verification of non-support of services (Advice of Charge Charging (AoCC)).82
11.4 Verification of non-support of services (call hold).83
11.5 Verification of non-support of services (multiparty).84
11.6 Verification of non-support of feature (Fixed Dialling Number (FDN)).85
11.7 IMEI Security.86
11.8 Coding of the Bearer Capability information element .87
11.8.1 Network to MS Direction.88
11.8.1.1 BS 21 to 26 - Asynchronous Service.88
11.8.1.1.1 BS 21 .88
11.8.1.1.2 BS 22 .92
11.8.1.1.3 BS 24 .92
11.8.1.1.4 BS 25 .92
11.8.1.1.5 BS 26 .92
11.8.1.1.6 BS 23 .92
11.8.1.2 BS 31 to 34 - Synchronous Service.93
11.8.1.2.1 BS 32 .93
11.8.1.2.2 BS 31 .97
11.8.1.2.3 BS 33 .98
11.8.1.2.4 BS 34 .98
11.8.1.3 BS 61 - Alternate Speech / Data.98
11.8.1.3.1 Speech/Asynchronous Data,
Transparent .99
11.8.1.3.2 Speech/Asynchronous Data, Non
Transparent .101
11.8.1.3.3 Speech/Synchronous Data .103
11.8.1.4 BS 81 - Speech followed by Data .104
11.8.1.4.1 Speech followed by Asynchronous
Data .104
11.8.1.4.2 Speech followed by Synchronous
Data .104
11.8.1.5 TS 61 - Alternate Speech / Facsimile group 3.104
11.8.1.5.1 TS 61 - Alternate Speech / Facsimile
group 3, Transparent .105
11.8.1.5.2 TS 61 - Alternate Speech / Facsimile
group 3, Non-Transparent .106
11.8.1.6 TS 62 - Automatic Facsimile group 3 .107
11.8.2 MS to SS direction.107
11.8.2.1 BS 21 to 26 - Asynchronous Service.107
11.8.2.1.1 BS 21 .108
11.8.2.1.2 BS 22 .112
11.8.2.1.3 BS 24 .112
11.8.2.1.4 BS 25 .112
11.8.2.1.5 BS 26 .112
11.8.2.1.6 BS 23 .112
11.8.2.2 BS 31 to 34 - Synchronous Service.113
11.8.2.2.1 BS 32 .113
11.8.2.2.2 BS 31 .117
11.8.2.2.3 BS 33 .118
11.8.2.2.4 BS 34 .118
11.8.2.3 BS 41 to 46 - PAD Access Asynchronous.119
2)
11.8.2.3.1 BS 41 .119
11.8.2.3.2 BS 42 .120
11.8.2.3.3 BS 44 .121
11.8.2.3.4 BS 45 .121
11.8.2.3.5 BS 46 .121
11.8.2.3.6 BS 43 .121
11.8.2.4 BS 51 to 53 - Packet Service Synchronous.122
2)
11.8.2.4.1 BS 51 .122
11.8.2.4.2 BS 52 .122
11.8.2.4.3 BS 53 .122

---------------------- Page: 6 ----------------------

SIST ETS 300 607-1 E7:2005
Page 5
ETS 300 607-1 (GSM 11.10-1 version 4.20.1): April 1998
11.8.2.5 BS 61 - Alternate Speech / Data . 123
11.8.2.5.1 Speech/Asynchronous Data,
Transparent . 123
11.8.2.5.2 Speech/Asynchronous Data, Non
Transparent . 125
11.8.2.5.3 Speech/Synchronous Data. 127
11.8.2.6 BS 81 - Speech followed by Data. 128
11.8.2.6.1 Speech followed by Asynchronous
Data. 128
11.8.2.6.2 Speech followed by Synchronous
Data. 128
11.8.2.7 TS 61 - Alternate Speech / Facsimile group 3 . 128
11.8.2.7.1 TS 61 - Alternate Speech / Facsimile
group 3, Transparent. 129
11.8.2.7.2 TS 61 - Alternate Speech / Facsimile
group 3, Non Transparent . 130
11.8.2.8 TS 62 - Automatic Facsimile group 3. 131
11.8.2.9 TS 11 and TS 12- Speech. 131
11.8.2.9.1 Support of only full/half rate speech
version 1. 131
11.8.2.9.2 Support of speech full rate version 2
(Enhanced Full Rate). 131
12 Transceiver . 133
12.1 Conducted spurious emissions . 133
12.1.1 MS allocated a channel. 133
12.1.2 MS in idle mode . 134
12.2 Radiated spurious emissions . 136
12.2.1 MS allocated a channel. 136
12.2.2 MS in idle mode . 138
13 Transmitter. 141
13.1 Frequency error and phase error. 141
13.2 Frequency error under multipath and interference conditions. 144
13.3 Transmitter output power and burst timing. 146
13.4 Output RF spectrum. 153
13.5 Intermodulation attenuation. 159
14 Receiver. 161
14.1 Bad frame indication. 167
14.1.1 Bad frame indication - TCH/FS. 167
14.1.1.1 Bad frame indication - TCH/FS - Random RF input. 167
14.1.1.2 Bad frame indication - TCH/FS - Frequency hopping and
downlink DTX . 168
14.1.2 Bad frame indication - TCH/HS . 169
14.1.2.1 Bad frame indication - TCH/HS - Random RF input . 169
14.1.2.2 Bad frame indication - TCH/HS - Frequency hopping and
downlink DTX . 170
14.1.3 Bad frame indication - TCH/FS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network . 171
14.1.4 Bad frame indication - TCH/HS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network . 173
14.2 Reference sensitivity . 175
14.2.1 Reference sensitivity - TCH/FS. 175
14.2.2 Reference sensitivity - TCH/HS (Speech frames) . 178
14.2.3 Reference sensitivity - FACCH/F . 180
14.2.4 Reference sensitivity - FACCH/H. 181
14.2.5 Reference sensitivity - full rate data channels . 182
14.2.6 Reference sensitivity - half rate data channels . 183
14.2.7 Reference sensitivity - TCH/EFS . 184
14.3 Usable receiver input level range . 187
14.4 Co-channel rejection. 188
14.4.1 Co-channel rejection - TCH/FS. 188

---------------------- Page: 7 ----------------------

SIST ETS 300 607-1 E7:2005
Page 6
ETS 300 607-1 (GSM 11.10-1 version 4.20.1): April 1998
14.4.2 Co-channel rejection - TCH/HS.190
14.4.3 Co-channel rejection - TCH/HS (SID frames) .192
14.4.4 Co-channel rejection - FACCH/F.194
14.4.5 Co-channel rejection - FACCH/H .195
14.4.6 Co-channel rejection - TCH/EFS.196
14.5 Adjacent channel rejection.197
14.5.1 Adjacent channel rejection - speech channels.197
14.5.2 Adjacent channel rejection - control channels.200
14.6 Intermodulation rejection .202
14.6.1 Intermodulation rejection - speech channels.202
14.6.2 Intermodulation rejection - control channels .203
14.7 Blocking and spurious response.205
14.7.1 Blocking and spurious response - speech channels.205
14.7.2 Blocking and spurious response - control channels.208
14.8 AM suppression .211
14.8.1 AM suppression - speech channels .211
14.8.2 AM suppression - control channels .213
15 Timing advance and absolute delay.215
16 Reception time tracking speed.217
17 Access times during handover .219
17.1 Intra cell channel change.219
17.2 Inter cell handover .221
18 Temporary reception gaps .224
19 Channel release after unrecoverable errors.226
19.1 Channel release after unrecoverable errors -1.226
19.2 Channel release after unrecoverable errors - 2.227
19.3 Channel release after unrecoverable errors - 3.228
20 Cell selection and reselection.230
20.1 Cell selection.231
20.2 Cell selection with varying signal strength values.233
20.3 Basic cell reselection .235
20.4 Cell reselection using TEMPORARY_OFFSET, CELL_RESELECT_OFFSET,
POWER_OFFSET and PENALTY_TIME parameters .237
20.5 Cell reselection using parameters transmitted in the System Information type 2bis, type
2ter, type 7 and type 8 messages.239
20.6 Cell reselection timings.241
20.7 Priority of cells.243
20.8 Cell reselection when C1 (serving cell) < 0 for 5 seconds.244
20.9 Running average of the surrounding cell BCCH carrier signal levels .245
20.10 Running average of the serving cell BCCH carrier signal level .246
20.11 Updating the list of six strongest neighbour carriers and decoding the BCCH
information of a new carrier on the list.248
20.12 Decoding the BCCH information of the neighbour carriers on the list of six strongest
neighbour carriers.249
20.13 Decoding the BSIC of the neighbour carriers on the list of six strongest neighbour
carriers.250
20.14 Emergency calls.251
20.15 Cell reselection due to MS rejection "LA not allowed" .252
20.16 Downlink signalling failure.254
20.17 Cell selection if no suitable cell found in 10 s .255
20.18 Cell reselection due to MS rejection "Roaming not allowed in this LA" .256
20.19 Cell selection on release of SDCCH and TCH .257
20.20 Multiband cell selection and reselection .259
20.20.1 Multiband cell selection and reselection / Cell Selection.259
20.20.2 Multiband cell selection and reselection / Cell reselection .261
21 Received signal measurements.263

---------------------- Page: 8 ----------------------

SIST ETS 300 607-1 E7:2005
Page 7
ETS 300 607-1 (GSM 11.10-1 version 4.20.1): April 1998
21.1 Signal strength. 263
21.2 Signal strength selectivity . 266
21.3 Signal quality under static conditions. 267
21.3.1 Signal quality under static conditions - TCH/FS. 267
21.3.2 Signal quality under static conditions - TCH/HS . 269
21.4 Signal quality under TU50 propagation conditions . 271
22 Transmit power control timing and confirmation. 274
23 Single frequency reference. 275
24 Tests of the layer 1 signalling functions. 276
25 Tests of the layer 2 signalling functions. 277
25.1 Introduction, objective and scope. 277
25.1.1 General . 277
25.1.2 Test configurations. 277
25.1.3 Pre-conditions . 277
25.1.4 Layer 2 test frames . 278
25.1.5 Establishment of the dedicated physical resource. 278
25.1.6 Release of the dedicated physical resource . 279
25.2 Test sequences . 279
25.2.1 Initialization . 280
25.2.1.1 Initialization when contention resolution required. 280
25.2.1.1.1 Normal initialization . 280
25.2.1.1.2 Initialization failure . 281
25.2.1.1.2.1 Loss of UA frame. 281
25.2.1.1.2.2 UA frame with different information
field. 282
25.2.1.1.2.3 Information frame and supervisory
frames in response to an SABM frame283
25.2.1.1.3 Initialization denial . 283
25.2.1.1.4 Total initialization failure . 284
25.2.1.2 Initialization, contention resolution not required . 285
25.2.1.2.1 Normal initialization without contention
resolution. 285
25.2.1.2.2 Initialization failure . 286
25.2.1.2.3 Initialization denial . 288
25.2.1.2.4 Total initialization failure . 288
25.2.2 Normal information transfer . 289
25.2.2.1 Sequence counting and I frame acknowledgements . 289
25.2.2.2 Receipt of an I frame in the timer recovery state . 292
25.2.2.3 Segmentation and concatenation. 294
25.2.3 Normal layer 2 disconnection. 297
25.2.4 Test of link failure. 297
25.2.4.1 I frame loss (MS to SS). 297
25.2.4.2 RR response frame loss (SS to MS). 298
25.2.4.3 RR response frame loss (MS to SS). 299
25.2.5 Test of frame transmission with incorrect C/R values . 300
25.2.5.1 I frame with C bit set to zero. 300
25.2.5.2 SABM frame with C bit set to zero .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.