SIST EN 60137:2004
(Main)Insulated bushings for alternating voltages above 1 000 V
Insulated bushings for alternating voltages above 1 000 V
Specifies the characteristics and tests for insulated bushings intended for use in electrical apparatus, machinery, transformers, switchgear and installations for three-phase alternating current systems, having highest voltage for equipment above 1 000 V and power frequencies of 15 Hz up to and including 60 Hz. Special requirements and tests for transformer bushings in this standard apply also to reactor bushings.
Isolierte Durchführungen für Wechselspannung über 1 000 V
Traversées isolées pour tensions alternatives supérieures à 1 000 V
Spécifie les caractéristiques et les essais applicables aux traversées isolées., destinées à être utilisées dans les dispositifs électriques, les machines, les transformateurs, les appareillages de commutation et les installations pour des systèmes à courant alternatif triphasé possédant une tension plus élevée pour le matériel dépassant 1 000 V et des fréquences industrielles comprises entre 15 Hz et 60 Hz (inclus). Les conditions spéciales et les essais concernant les traversées pour transformateurs se trouvant dans cette norme s'appliquent également aux traversées pour réacteurs.
Insulated bushings for alternating voltages above 1000 V (IEC 60137:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60137:2004
01-september-2004
1DGRPHãþD
SIST EN 60137:1997
Insulated bushings for alternating voltages above 1000 V (IEC 60137:2003)
Insulated bushings for alternating voltages above 1 000 V
Isolierte Durchführungen für Wechselspannung über 1 000 V
Traversées isolées pour tensions alternatives supérieures à 1 000 V
Ta slovenski standard je istoveten z: EN 60137:2003
ICS:
29.080.20 Skoznjiki Bushings
SIST EN 60137:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60137:2004
---------------------- Page: 2 ----------------------
SIST EN 60137:2004
EUROPEAN STANDARD EN 60137
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2003
ICS 29.080.20 Supersedes EN 60137:1996
English version
Insulated bushings for alternating voltages above 1 000 V
(IEC 60137:2003)
Traversées isolées pour tensions Isolierte Durchführungen für
alternatives supérieures à 1 000 V Wechselspannung über 1 000 V
(CEI 60137:2003) (IEC 60137:2003)
This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60137:2003 E
---------------------- Page: 3 ----------------------
SIST EN 60137:2004
EN 60137:2003 - 2 -
Foreword
The text of document 36A/111/FDIS, future edition 5 of IEC 60137, prepared by SC 36A, Insulated
bushings, of IEC TC 36, Insulators, was submitted to the IEC-CENELEC parallel vote and was approved
by CENELEC as EN 60137 on 2003-10-01.
This European Standard supersedes EN 60137:1996.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2006-10-01
This edition includes the following significant technical changes with respect to EN 60137:1996:
- standard values of highest voltage for equipment of 550 kV and 800 kV to replace 525 kV and
765 kV;
- consideration of the development in the use of non-ceramic insulating envelopes and to special
requirements for bushings used in air-insulated ducting;
- special requirements for bushings fitted to transformers.
Annexes designated "normative" are part of the body of the standard.
In this standard, annex ZA is normative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60137:2003 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60076-1 NOTE Harmonized as EN 60076-1:1997 (modified).
IEC 60076-2 NOTE Harmonized as EN 60076-2:1997 (modified).
IEC 60076-3 NOTE Harmonized as EN 60076-3:2001 (not modified).
IEC 60517 NOTE Harmonized as HD 358 S3:1992 (not modified).
IEC 60694 NOTE Harmonized as EN 60694:1996 (not modified).
__________
---------------------- Page: 4 ----------------------
SIST EN 60137:2004
- 3 - EN 60137:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60038 (mod) 1983 IEC standard voltages HD 472 S1 1989
+ corr. February 1992
A2 1997 - -
IEC 60050-212 1990 International Electrotechnical - -
Vocabulary (IEV)
Chapter 212: Insulating solids, liquids
and gases
IEC 60059 1999 IEC standard current ratings EN 60059 1999
IEC 60060-1 1989 High-voltage test techniques
+ corr. March 1990 Part 1: General definitions and test HD 588.1 S1 19
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.