115 - High Voltage Direct Current (HVDC) transmission for DC voltages above 100 kV

IEC TR 63179-1:2020 (E) provides guidelines for the selection of a high-voltage directive current (HVDC) system with line-commutated converters (LCC), hereafter referred to as HVDC system, for the purposes of HVDC system planning. It covers the guidelines on the requirements for integrating HVDC systems in AC power networks, selection of rated voltage and power, overloads, circuit configuration, expandability, comparison of technical, economic, regulatory, political, social and environmental fac...view more

IEC TR 63127:2019(E) focuses on the system design of converter stations. It is applicable to point-­to-­point and back-to-back HVDC systems based on line-commutated converter (LCC) technology. This document provides guidance and supporting information on the procedure for system design and the technical issues involved in the system design of HVDC transmission projects for both purchaser and potential suppliers. It can be used as the basis for drafting a procurement specification and as a guide ...view more

IEC TR 62672:2018(E) applies to all line-commutated and voltage-sourced high-voltage direct current (HVDC) transmission systems used for power exchange in utility systems. The purpose of this document is to define a standardized reporting protocol so that data collected from different HVDC transmission systems can be compared on an equitable basis. This document covers point-to-point transmission systems, back-to-back interconnections and multi-terminal transmission systems.

IEC TS 63014-1:2018(E) is intended to provide an overall and consistent set of guidelines to facilitate the specification of equipment for the DC-side of a high-voltage direct current (HVDC) system using line-commutated converters. For point-to-point HVDC transmission systems, this document covers all DC-side equipment located between the converter valves and the DC overhead line or cable termination, excluding the converter valves themselves. For back-to-back HVDC systems, this document covers ...view more

IEC TR 62978:2017(E) gives guidelines on the current asset management perspectives for HVDC installations based on best practices of asset owners, operators, users, original equipment manufacturers and regulators within the power industry. This document covers HVDC systems with Line-Commutated Converters (LCC) and can be generally applied to Voltage Sourced Converters (VSC), not including specific equipment or sub-equipment required under VSC. This document provides base guidelines on fundamenta...view more

IEC TR 63065:2017(E) provides general guidance on basic principles and general proposals for the safe and economic operation and maintenance of an LCC converter station.
These guidelines are based on the operation and maintenance practices that have been used successfully during the last decades at HVDC converter stations all over the world, and can be referred to by new HVDC users to optimize operation and maintenance policy and assist in performing the operation and maintenance work.
This do...view more

IEC TR 62681:2014 provides general guidance on the electromagnetic environment issues of HVDC transmission lines. It concerns the major parameters adopted to describe the electromagnetic environment of a High-Voltage Direct Current (HVDC) transmission line, including electric fields, ion current, magnetic fields radio interference, and audible noise generated as a consequence of such effects. Engineers in different countries can refer to this Technical Report to ensure the safe operation of HVDC...view more

IEC/TS 62344:2013(E) applies to the design of earth electrode stations for high-voltage direct current (HVDC) links. It is intended to provide necessary guidelines, limits, and precautions to be followed during the design of earth electrodes to ensure safety of personnel and earth electrodes and prevent any significant impact they may exert on d.c. power transmission systems and the surrounding environment. This technical specification cancels and replaces IEC/PAS 62344 published in 2007. This f...view more

IEC/TS 61973:2012(E) applies to the specification and evaluation of outdoor audible noise from high voltage direct current (HVDC) substations. It is intended to be primarily for the use of the utilities and consultants who are responsible for issuing technical specifications for new HVDC projects with and evaluating designs proposed by prospective contractors. It is primarily intended for HVDC projects with line-commutated converters. Part of this technical specification can also be used for the...view more