29.240.99 - Other equipment related to power transmission and distribution networks

IEC TR 60919-1:2020 is available as IEC TR 60919-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC TR 60919-1:2020(E) provides general guidance on the steady-state performance requirements of high-voltage direct current (HVDC) systems. It concerns the steady-state performance of two-terminal HVDC systems utilizing 12-pulse converter units comprised of three-phase bridge (double-way) ...view more

DAV on 2020-02-28.

IEC TR 63239:2020 presents the surveyed technologies, product development trends, international standards, and regulation trends of RF beam WPT. This report can be used for the research and analysis of projects that apply small-output remote WPT to mobile devices, such as smartphones, Internet of Things (IoT) devices, and ultra-small sensors.

IEC 63006:2019 specifies terminology and definitions related to wireless power transfer (WPT) technologies below 30 MHz to promote global harmonization of wireless power transfer terminology. This document does not address terminology of wireless power transfer outside the scope of IEC TC 100 (Audio, video and multimedia systems and equipment), such as human exposure or safety.

IEC 63006:2019 specifies terminology and definitions related to wireless power transfer (WPT) technologies below 30 MHz to promote global harmonization of wireless power transfer terminology.
This document does not address terminology of wireless power transfer outside the scope of IEC TC 100 (Audio, video and multimedia systems and equipment), such as human exposure or safety.

IEC TR 63262:2019(E) provides guidelines for applying unified power flow controllers (UPFC) in power systems. It includes letter symbols, terms and definitions, principles and configurations, design rules, performance requirements for key equipment control and protection, insulation co-ordination, system performance and tests. This technical report applies to the UPFC based on modular multi-level converter (MMC) technology, as well as UPFC based on three-level converter technology.

IEC TR 63231:2019 describes the technical background of current energy efficiency efforts related to wireless power transfer (WPT) technology and commercially available products related to related to audio, video and multimedia systems and equipment. This Technical Report examines use cases, standardization efforts of other standards development organizations (SDOs) and known national regulations. This document concludes with observations and recommendations for the potential future technical st...view more

IEC 62872-1:2019(E) defines the interface, in terms of information flow, between industrial facilities and the “smart grid”. It identifies, profiles and extends where required, the standards needed to allow the exchange of the information needed to support the planning, management and control of electric energy flow between the industrial facility and the smart grid.
The scope of this document specifically excludes the protocols needed for the direct control of energy resources within a facilit...view more

This International Standard defines terms for the subject of self-commutated voltage-sourced converters used for transmission of power by high voltage direct current (HVDC). The standard is written mainly for the case of application of insulated gate bipolar transistors (IGBTs) in voltage sourced converters (VSC) but may also be used for guidance in the event that other types of semiconductor devices which can both be turned on and turned off by control action are used. Line-commutated and curre...view more

IEC 60358-4:2018 applies to DC or AC single-phase capacitor-dividers connected between line and ground used for manufacturing Voltage Transformers as well as for other applications. IEC 60358-4:2018 is to be used in conjunction with the latest edition of IEC 60358-1 and its amendments. IEC 60358-4:2018 was established on the basis of the IEC 60358-1:2012. IEC 60358-4:2018 supplements or modifies the corresponding clauses in IEC 60358-1:2012. This standard cancels and replaces the second edition ...view more

IEC 60358-4:2018 applies to DC or AC single-phase capacitor-dividers connected between line and ground used for manufacturing Voltage Transformers as well as for other applications. IEC 60358-4:2018 is to be used in conjunction with the latest edition of IEC 60358-1 and its amendments. IEC 60358-4:2018 was established on the basis of the IEC 60358-1:2012. IEC 60358-4:2018 supplements or modifies the corresponding clauses in IEC 60358-1:2012. This standard cancels and replaces the second edition ...view more

Specifies end-to-end dimensions for given nominal sizes and pressure ratings of buttweld, two-way, global-type, straigth pattern control valves for nominal sizes DN 15 through DN 450. Aids users in their piping design by providing normalized dimensions of buttweld end control valves.

This part of IEC 62827 defines a wireless power management protocol for wireless power
transfer to multiple devices in a wireless power management system. Various functions of
wireless power management systems are justified. The wireless power management frames
and messages that work between the management block of a power source and the
management block or the coupler block of a device, or the coupler block of a power source,
are defined as well to execute various functions. Also, the proc...view more

This document defines technical requirements, behaviors and interfaces used for ensuring
interoperability for flexibly coupled wireless power transfer (WPT) systems for AirFuel
Resonant WPT. This document is based on AirFuel Wireless Power Transfer System Baseline
System Specification (BSS) v1.3.
Products implementing this document are expected to follow applicable regulations and global
standards.